4 layers61.8 × 27.5 mm
Audio Processing HW V1.0
aitesam961/OpenADSP
An Embedded Digital Signal Processing Device for Audio signals.
83 parts4GPL-3.0
4 layers39.8 × 17.2 mm
RF Design
unaldevelopment/RF-Design- Size
- 39.8 × 17.2 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 39
- Nets
- 50
- Pads
- 168
- Tracks, vias
- 324, 29
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 22 Feb 2021
- Updated
- 27 Feb 2021
Overview
RF Design is an open-source printed circuit board by unaldevelopment, from the unaldevelopment/RF-Design repository on GitHub, published under the MIT licence. It is a 4-layer board of 39.8 × 17.2 mm with 39 parts on 50 nets, routed with 324 tracks and 29 vias.
It is built around the NRF24L01P-R and USBLC6-2SC6. Its parts include 18 capacitors, 5 resistors, 4 ICs, 3 connectors and 3 inductors. It belongs with the radio and wireless boards and the STM32 boards of this library.
Main components
2
NRF24L01P-R
QFN-20-EP(4x4)-40℃~+85℃ -82dBm 0dBm 1.9V~3.6V 11.3mA 13.5mA 2.4GHz 2.4GHz~2.525GHz 2Mbps ISM Power-on reset function、Supports RSSI function、CRC check function、Automatic response function、Automatic retransmission function SPI transceiver QFN-20-EP(4x4) RF Transceiver ICs ROHSNordic SemiconRF Transceiver ICs
USBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)
README
README.mdRF to USB Dongle
Installation of Kicad on Ubuntu
sudo add-apt-repository --yes ppa:kicad/kicad-5.1-releases
sudo apt update
sudo apt install --install-recommends kicadAfter installation;
cd ~/Desktop
git clone "https://github.com/aliozcanunal/RF-Design"
cd /RF-Design/Rf -Design
kicad Rf -Design.pro
Parts
39| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100n | Capacitor_SMD:C_0402_1005Metric | C3, C5, C6, C7 |
| 3 | 10n | Capacitor_SMD:C_0402_1005Metric | C9, C10, C11 |
| 3 | 3n9 | Inductor_SMD:L_0402_1005Metric | L1, L2, L3 |
| 2 | 10K | Resistor_SMD:R_0402_1005Metric | R1, R6 |
| 2 | 10u | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 2 | 12p | Capacitor_SMD:C_0402_1005Metric | C13, C14 |
| 2 | 2.2K | Resistor_SMD:R_0402_1005Metric | R2, R3 |
| 2 | LED | LED_SMD:LED_0603_1608Metric | RX, TX |
| 1 | 100 @ 100MHz | Inductor_SMD:L_0805_2012Metric | FB1 |
| 1 | 100mA | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | 10u | Capacitor_SMD:C_0402_1005Metric | C8 |
| 1 | 1M | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | 1p | Capacitor_SMD:C_0402_1005Metric | C16 |
| 1 | 1p5 | Capacitor_SMD:C_0402_1005Metric | C15 |
| 1 | 1u | Capacitor_SMD:C_0402_1005Metric | C4 |
| 1 | 2n2 | Capacitor_SMD:C_0402_1005Metric | C17 |
| 1 | 33n | Capacitor_SMD:C_0402_1005Metric | C12 |
| 1 | 4p7 | Capacitor_SMD:C_0402_1005Metric | C18 |
| 1 | Crystal_GND23 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | LOG | ali1:ali1 | G*** |
| 1 | SMA | Connector_Coaxial:SMA_Samtec_SMA-J-P-X-ST-EM1_EdgeMount | J2 |
| 1 | STM32L432KBUx | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mm | U3 |
| 1 | SWD | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical | J3 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U2 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Molex-105017-0001 | J1 |
| 1 | XC6206PxxxMR | Package_TO_SOT_SMD:SOT-23 | U1 |
| 1 | nRF24L01P | Package_DFN_QFN:QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm | U4 |
Questions
How big is the RF Design PCB?
It measures 39.8 × 17.2 mm and has 4 copper layers, 1.6 mm thick.
What parts does the RF Design use?
39 parts, built around the NRF24L01P-R and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RF Design KiCad files?
From the unaldevelopment/RF-Design repository on GitHub, at the commit this page was made from: the board is Rf -Design/Rf -Design.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the RF Design design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 4 layers54.6 × 20.8 mm
R.F.-Transceiver PCB
ad-astra-et-ultra/R.F.-Transceiver-PCB
STM32 based radio-frequency transceiver PCB for IoT applications on KiCad
38 parts2MIT - 4 layers95 × 24 mm
BoardyMcBoardFace
akhilveeraghanta/the-bots-mainboard
The main board for the the bots SSL robocup team
115 parts1 - 4 layers39 × 15 mm
- 4 layers41.7 × 16.6 mm
- 4 layers60 × 77 mm
- 4 layers100 × 65 mm
- 4 layers42 × 20 mm
