6 layers48 × 40 mm
6 layers48 × 40 mm
Digital
UMDBPP/TerminatorFlight termination device
- Size
- 48 × 40 mm
- Copper layers
- 6
- Thickness
- 1.56 mm
- Parts
- 96
- Nets
- 102
- Pads
- 397
- Tracks, vias
- 725, 321
- Pours
- 488
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 29 Jul 2023
- Updated
- 7 Sep 2026
Overview
Digital is an open-source printed circuit board by UMDBPP, from the UMDBPP/Terminator repository on GitHub. It is a 6-layer board of 48 × 40 mm with 96 parts on 102 nets, routed with 725 tracks and 321 vias.
It is built around the BGS 12WN6 E6327, SX1262IMLTRT and LTC3306CACBZ-R7, with the MIA-M10Q, MIC5504-3.3YM5 and 0900FM15K0039E among its other parts. Its parts include 34 capacitors, 23 resistors, 11 ICs, 6 connectors and 5 inductors. It belongs with the STM32 boards of this library.
Main components
7
BGS 12WN6 E6327
DFN-6(0.7x1.1)-40℃~+85℃ 0.75dB 1.65V~3.6V 50MHz~6GHz 53dB SPDT DFN-6(0.7x1.1) RF Switches ROHSInfineon TechnologiesRF Switches
SX1262IMLTRT
QFN-24-EP(4x4)-148dBm -40℃~+85℃ 1.8V~3.7V 150MHz~960MHz 22dBm 300Kbps 32mA 4.2mA ISM SPI Supports software reset、Power-on reset function、Supports RSSI function transceiver QFN-24-EP(4x4) RF Transceiver ICs ROHSSEMTECHRF Transceiver ICs
LTC3306CACBZ-R7
WLCSP-6(1x1.6)-40℃~+125℃@(TJ) 1 1.75A 2.25V~5.5V 2MHz 500mV~3.65V Buck Buck Built-in Yes WLCSP-6(1x1.6) DC-DC Converters ROHSAnalog DevicesDC-DC Converters
MIA-M10Q
LGA-53LGA-53 New Arrivals ROHSu-bloxUncategorised
MIC5504-3.3YM5
SOT-23-5-40℃~+125℃@(Tj) 1 120uVrms 15uA 180mV@(300mA) 3.3V 300mA 5.5V 75dB@(1kHz) Fixed Over Temperature Protection、Enable Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTECH PUBLICVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
0900FM15K0039E
SMD-10P,1.2x2mmSMD-10P,1.2x2mm Ceramic Filters ROHSJohanson DielectricsCeramic Filters
USBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)
README
README.mdTerminator
A flight termination device for BPP.
T1100 - Current Revision
Much the same as T1000 but simpler and more complete.
T1000
Shipman's ENEE499L project. The digital portion integrates a STM32L4, GPS, P/T Sensor, FRAM, and SX1262 Radio. This should provide quite a bit of flexibility in a small package while consuming minimal power. The digital board interfaces with a cutdown board which performs hot-wire termination like many other designs. However, this board is really just a barebones buck converter power stage that will be controlled by the digital board. This should provide increased flexiblity and efficiency over other implementations while also allowing T1000 to terminate even 550 paracord.
Parts
96| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 100nF | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3, C4, C6, C7, C9, C11, C14, C25, C26, C27, C28, C32 |
| 6 | 1uF | Capacitor_SMD:C_0603_1608Metric | C15, C16, C17, C18, C22, C24 |
| 5 | 10k | Resistor_SMD:R_0402_1005Metric | R3, R4, R12, R13, R25 |
| 4 | 0 | Resistor_SMD:R_0402_1005Metric | R2, R6, R7, R19 |
| 3 | 10uF | Capacitor_SMD:C_0805_2012Metric | C19, C23, C35 |
| 3 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2, TP3 |
| 2 | 100k | Resistor_SMD:R_0402_1005Metric | R17, R20 |
| 2 | 32.768k | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1, Y2 |
| 2 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C5, C8 |
| 2 | 47nH | Inductor_SMD:L_0402_1005Metric | L3, L5 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R9, R10 |
| 2 | C_Small | Capacitor_SMD:C_0402_1005Metric | C12, C13 |
| 2 | Conn_01x05_Pin | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J3, J7 |
| 2 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2 |
| 2 | SW_SPDT | BPP_Lib:CAS-120TB_NDC-M | SW1, SW2 |
| 1 | 0900FM15K0039 | RF_Converter:Balun_Johanson_0900FM15K0039 | FL1 |
| 1 | 100 | Resistor_SMD:R_0402_1005Metric | R22 |
| 1 | 100m | Resistor_SMD:R_0402_1005Metric | R11 |
| 1 | 10pF | Capacitor_SMD:C_0402_1005Metric | C31 |
| 1 | 113k | Resistor_SMD:R_0402_1005Metric | R18 |
| 1 | 15uF | Capacitor_SMD:C_1206_3216Metric | C21 |
| 1 | 15uH | Inductor_SMD:L_0805_2012Metric | L4 |
| 1 | 1S | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | BT1 |
| 1 | 1nF | Capacitor_SMD:C_0402_1005Metric | C34 |
| 1 | 1uH | Inductor_SMD:L_0805_2012Metric | L1 |
| 1 | 2.2pF | Capacitor_SMD:C_0402_1005Metric | C20 |
| 1 | 220 | Resistor_SMD:R_0402_1005Metric | R21 |
| 1 | 294k | Resistor_SMD:R_0402_1005Metric | R15 |
| 1 | 3.3uH | Inductor_SMD:L_1210_3225Metric | L2 |
| 1 | 39pF | Capacitor_SMD:C_0402_1005Metric | C33 |
| 1 | 47nF | Capacitor_SMD:C_0402_1005Metric | C29 |
| 1 | 47pF | Capacitor_SMD:C_0402_1005Metric | C30 |
| 1 | 51k | Resistor_SMD:R_0402_1005Metric | R24 |
| 1 | 6.8k | Resistor_SMD:R_0402_1005Metric | R23 |
| 1 | 600 | Resistor_SMD:R_0402_1005Metric | R16 |
| 1 | 649k | Resistor_SMD:R_0402_1005Metric | R14 |
| 1 | Antenna | BPP_Lib:ANT_1575AT_JOT-M | AE1 |
| 1 | BGS12WN6E6327 | Package_LGA:Infineon_PG-TSNP-6-10_0.7x1.1mm_0.7x1.1mm_P0.4mm | U10 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | Conn_01x06_Socket | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J2 |
| 1 | Conn_Coaxial | Connector_Coaxial:U.FL_Molex_MCRF_73412-0110_Vertical | J6 |
| 1 | DNF | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | ECS-2520MV-xxx-xx | Oscillator:Oscillator_SMD_ECS_2520MV-xxx-xx-4Pin_2.5x2.0mm | X1 |
| 1 | ECS-TXO-25CSMV-320 | Crystal:Crystal_SMD_2520-4Pin_2.5x2.0mm | TCXO1 |
| 1 | LED_Small | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | LM66100DCKR | Package_TO_SOT_SMD:SOT-363_SC-70-6 | U7 |
| 1 | LM66200DRLR | BPP_Lib:SOT-5X3_DRL_TEX | U6 |
| 1 | LTC3306CACBZ-R7 | BPP_Lib:CB-6-19_ADI | U11 |
| 1 | LTC4065EDC-TRMPBF | BPP_Lib:DFN-6_DC_LIT | U8 |
| 1 | MB85RS1MT | BPP_Lib:BGA8CP30X40_5X3_309X228X35B25N | U4 |
| 1 | MIA-M10Q | BPP_Lib:MIA-M10Q | U2 |
| 1 | MIC5504-3.3YM5 | Package_TO_SOT_SMD:SOT-23-5 | U5 |
| 1 | MS5607-02BA | Package_LGA:LGA-8_3x5mm_P1.25mm | U1 |
| 1 | STM32L422KBUx | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mm | U12 |
| 1 | SX1262IMLTRT | Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U9 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:TSOT-23-6 | D1 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J5 |
The 95 most common of 96 parts.
Questions
How big is the Digital PCB?
It measures 48 × 40 mm and has 6 copper layers, 1.56 mm thick.
What parts does the Digital use?
96 parts, built around the BGS 12WN6 E6327, SX1262IMLTRT, LTC3306CACBZ-R7 and MIA-M10Q. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Digital KiCad files?
From the UMDBPP/Terminator repository on GitHub, at the commit this page was made from: the board is Hardware/T1000/Digital/Digital.kicad_pcb and its schematic Hardware/T1000/Cutdown_Power/cutdown/cutdown.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Digital design in my own project?
Its repository states no licence, so its author keeps all rights: ask UMDBPP before reusing the design.
More from UMDBPP/Terminator
4- 4 layers48 × 32 mm
- 4 layers48 × 32 mm
- 4 layers48 × 32 mm
Similar boards
- 4 layers65 × 44 mm
- 6 layers53.7 × 46.9 mm
- 4 layers68 × 73.5 mm
Messenger
nickzentmayer/Messenger
This is a repository of hardware and software for a SX1262 radio based messageing device I made. This device supports a messaging protocol named Hermes that I created with insperation from protocols like TCP.
91 parts1 - 4 layers
BigBoi
NedreAkerselvSkapervOgAkadmikerforening/Nebula
Nebula er foreningen NASAs neste generasjons flydatamaskin til bruk i foreningens modellrakketter.
100 parts - 4 layers24.8 × 35.8 mm
LoRa Dongle
Loredati-svg/LoRa-USB-Dongle
USB-C LoRa dongle (868 MHz) with STM32WLE5, CP2102N USB-UART bridge and SMA antenna connector. KiCad 10 hardware design: schematic, PCB and libraries.
47 parts - 4 layers68.8 × 90.3 mm
Horizon
Horizon-Avionics/Horizon-H1
Building a fully open-source flight computer for amateur rocketry!
173 parts17 - 4 layers61.8 × 79.6 mm
- 4 layers47.5 × 43.5 mm
Lora v2
AYUSH-pro-grammer/lora
A LoRa board project that I made in order to figure out how radios really work, rather than just reading about them.
65 parts1