Skip to the content
2 layers93.7 × 53.1 mmUINIO MCU HC32F460PETB, the printed circuit board in 3D

UINIO MCU HC32F460PETB

uinika/UINIO-MCU-HC32F460PETB

the Evaluation Board base on HC32F460PETB with ARM Cortex-M4

Size
93.7 × 53.1 mm
Copper layers
2
Thickness
1.6 mm
Parts
56
Nets
106
Pads
320
Tracks, vias
530, 262
Pours
298
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
7 Dec 2024
Updated
7 Dec 2024

Overview

UINIO MCU HC32F460PETB is an open-source printed circuit board by uinika, from the uinika/UINIO-MCU-HC32F460PETB repository on GitHub. It is a 2-layer board of 93.7 × 53.1 mm with 56 parts on 106 nets, routed with 530 tracks and 262 vias.

It is built around the HC32F460PETB-LQFP100 and ME6211C33M5G-N. Its parts include 24 capacitors, 9 connectors, 7 resistors, 4 inductors and 2 ICs.

Main components

2

README

README.md

UINIO-MCU-HC32F460PETB 核心板

UINIO-MCU-HC32F460PETB 是一款基于小华半导体 HC32F460PETB-LQFP100 型微控制器的核心板,该款微控制器的最大特点是支持 1.8V ~ 3.6V 的宽电压范围,和 -40℃ ~ 105℃ 的宽温度范围。基于 ARM Cortex-M4 内核架构,最高工作频率可以达到 200MHz,内置有 DSP 数字信号处理器和 FPU 浮点运算单元。除此之外,还集成有 512KB 的 Flash 存储器,以及 192KB 的 SRAM 存储器。

设计概要

  • 外部晶振电路,全部使用了打孔包地处理;
  • 扩展了两路串联有自恢复保险丝的 5V 电源接口,整体采用覆铜处理,以提升接口的载流能力;
  • 模拟电源引脚 AVSS 和 AVCC 都串联有对 100Mhz 高频杂散信号存在 1KΩ 阻抗的磁珠;
  • 对调试下载接口 SWD 进行了前置处理,并且匹配了通信线序,可以方便快速的与 UINIO-DAPLink 进行杜邦线连接;
  • 引出了全部的 83 个 GPIO 端口,可以自由的使用 8 种常见的外设通信接口:
接口名称      数量  描述                                                                        
GPIO      83 个PAx、PBx、PCx、PDx、PEx、PHx 一共六组。                        
I2C        3 组  支持 SMBus 协议。                                                          
USART      4 组  支持 ISO7816-3 协议。                                                      
SPI        4 组  支持 4 线式 SPI 模式和 3 线式时钟同步模式,支持全双工和只传送两种通信方式。
QSPI      1 组  支持 200Mbps 高速访问的存储器控制模块。                                  
I2S        4 组  内置音频 PLL 支持音频级采样精度。                                          
SDIO      2 组  支持 SD/MMC/eMMC 格式。                                                    
CAN        1 组  支持 ISO11898-1 标准协议。                                                  
USB 2.0 FS1 组  内置 PHY,支持 Device/Host 模式。                                          

参考技术文档

UinIO.com 电子技术实验室 为 UINIO-MCU-HC32F460PETB 开源项目提供了如下一系列参考技术资料:

Parts

56
QtyValueFootprintReferences
130.1uFCapacitor_SMD:C_0603_1608MetricC1, C5, C8, C9, C10, C12, C13, C17, C19, C20, C21, C22, C23
61uFCapacitor_SMD:C_0603_1608MetricC2, C3, C4, C7, C11, C24
5Conn_01x04_PinConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ5, J6, J7, J8, J9
410pFCapacitor_SMD:C_0603_1608MetricC14, C15, C16, C18
41K 100MHzInductor_SMD:L_0603_1608MetricL1, L2, L3, L4
4Hole-2mmUinio:Hole-2mmHOLE**, HOLE**, HOLE**, HOLE**
310KResistor_SMD:R_0603_1608MetricR5, R6, R7
25.1KResistor_SMD:R_0603_1608MetricR1, R2
2Conn_01x34_PinConnector_PinHeader_2.54mm:PinHeader_1x34_P2.54mm_VerticalJ2, J3
12KResistor_SMD:R_0603_1608MetricR3
132.768KHzCrystal:Crystal_SMD_3215-2Pin_3.2x1.5mmY1
14.7KResistor_SMD:R_0603_1608MetricR4
14.7uFCapacitor_SMD:C_0603_1608MetricC6
18MHzCrystal:Crystal_SMD_3225-4Pin_3.2x2.5mmY2
1Conn_01x03_PinConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ4
1Conn_01x18_PinConnector_PinHeader_2.54mm:PinHeader_1x18_P2.54mm_VerticalJ1
1FuseFuse:Fuse_1206_3216MetricF1
1HC32F460PETB-LQFP100Uinio:LQFP-100_L14.0-W14.0-P0.50-LS16.0-BLU2
1LED-REDLED_SMD:LED_0603_1608MetricD1
1ME6211C33M5GUinio:SOT-23-5_L3.0-W1.7-P0.95-LS2.8-BLU1
1NRSTUinio:SW-SMD_4P-L4.2-W3.4-P2.15-LS4.7SW1
1USB_Type_C_16PinUinio:USB_Type_C_16PinUSB1

Similar boards

  • 2 layers87.8 × 59.8 mmFreeDeck SMD 2020-02, the printed circuit board in 3D

    FreeDeck SMD 2020-02

    FreeYourStream/freedeck-hardware

    all the stuff you need to build your own FreeDeck

    37 parts772
  • 2 layers83.2 × 40 mmSmartdisplay, the printed circuit board in 3D

    Smartdisplay

    BearLaboratory/smartdisplay-hardware

    2.9寸墨水屏个人显示终端硬件显示

    46 parts175GPL-3.0
  • 2 layers35.4 × 27 mmWifiaudio, the printed circuit board in 3D

    Wifiaudio

    BearLaboratory/wifiaudio-tx-hardware

    WiFi无线麦克风硬件pcb设计

    29 parts110GPL-3.0
  • 4 layers50 × 50 mmHSCanT, the printed circuit board in 3D

    HSCanT

    cherry-embedded/HSCanT-hardware

    HSCanT is a USB to 4-channel CAN FD tool designed based on the HPM5321 chip.

    130 parts52Apache-2.0
  • 4 layers72.4 × 44.4 mmBtmdpcb v04 eval, the printed circuit board in 3D

    Btmdpcb v04 eval

    17o2/bluetooth-minidisc

    Adding built-in bluetooth connectivity to a 20-year-old Mindisc player

    115 parts45
  • 2 layers69.8 × 40.4 mmT Piece Kicad, the printed circuit board in 3D

    T Piece Kicad

    calebmarting/os2026-badge

    Schematics and firmware for the Open Sauce 2026 Badge and SAOs

    82 parts23MIT
  • 2 layers76.6 × 141.1 mmOniondao badge, the printed circuit board in 3D

    Oniondao badge

    OnionDAO-git/oniondao-badge

    An open-source, hacker-conference-style electronic badge built around the ESP32-S3-WROOM-1-N8R8 (8 MB flash + 8 MB Octal PSRAM), with swappable RF / audio / storage modules, an e-paper (or TFT) display socket, a secure…

    190 parts17
  • 2 layers95.1 × 30 mmUINIO DAPLink, the printed circuit board in 3D

    UINIO DAPLink

    uinika/UINIO-DAPLink

    the PCB board design for ARM Mbed DAP Link.

    55 parts17

Questions

How big is the UINIO MCU HC32F460PETB PCB?

It measures 93.7 × 53.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the UINIO MCU HC32F460PETB use?

56 parts, built around the HC32F460PETB-LQFP100 and ME6211C33M5G-N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the UINIO MCU HC32F460PETB KiCad files?

From the uinika/UINIO-MCU-HC32F460PETB repository on GitHub, at the commit this page was made from: the board is UINIO-MCU-HC32F460PETB.kicad_pcb and its schematic UINIO-MCU-HC32F460PETB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the UINIO MCU HC32F460PETB design in my own project?

Its repository states no licence, so its author keeps all rights: ask uinika before reusing the design.