

OSAVC interface shield
- Size
- 101.6 × 53.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 39
- Nets
- 41
- Pads
- 236
- Tracks, vias
- 377, 34
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 7 Jun 2021
- Updated
- 3 Sep 2023
Overview
OSAVC interface shield is an open-source printed circuit board by uccross, from the uccross/open-source-autonomous-vehicle-controller repository on GitHub, published under the MIT licence. It is a 2-layer board of 101.6 × 53.3 mm with 39 parts on 41 nets, routed with 377 tracks and 34 vias.
It is built around the 24LC256-I/P. Its parts include 17 connectors, 9 resistors, 5 diodes, 2 capacitors and 2 ICs. It belongs with the interfaces and adapters boards of this library.
Main components
1README
README.mdOpen Source Autonomous Vehicle Controller
Parts
39| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | LED | LED_SMD:LED_0805_2012Metric | D1, D2, D3, D4, D5 |
| 4 | 260 | Resistor_SMD:R_0805_2012Metric | R3, R4, R6, R7 |
| 3 | MountingHole | MountingHole:MountingHole_3mm | H1, H2, H3 |
| 2 | 4.7K | Resistor_SMD:R_0805_2012Metric | R8, R9 |
| 1 | Connector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_Vertical | J9 | |
| 1 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 11K | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 180K | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 24LC256 | Package_SO:SOIJ-8_5.3x5.3mm_P1.27mm | U1 |
| 1 | 600 | Resistor_SMD:R_0805_2012Metric | R5 |
| 1 | 680uF | Capacitor_Tantalum_SMD:CP_EIA-7343-30_AVX-N | C2 |
| 1 | ANALOG 1 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J4 |
| 1 | ANALOG 2 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J7 |
| 1 | BTN | Button_Switch_THT:SW_PUSH_6mm_H4.3mm | SW1 |
| 1 | COMMUNICATION | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J2 |
| 1 | DIGITAL | Connector_PinHeader_2.54mm:PinHeader_2x18_P2.54mm_Vertical | J1 |
| 1 | Encoder 4 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J23 |
| 1 | GPS | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J12 |
| 1 | I2C LiDAR | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J28 |
| 1 | I2C1 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J11 |
| 1 | Left Motor | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J20 |
| 1 | POWER | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J5 |
| 1 | PWM | OSAVC interface shield:PWM_HDR | J6 |
| 1 | PWM/DIGITAL | Connector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_Vertical | J3 |
| 1 | RC RX | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J14 |
| 1 | Radio | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J13 |
| 1 | Right Motor | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J21 |
| 1 | Sparkfun_ICM-20948_breakout | OSAVC interface shield:SPARKFUN_ICM20948_BREAKOUT | U2 |
| 1 | Steering | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J22 |
More from uccross/open-source-autonomous-vehicle-controller
1- 4 layers106.7 × 54.6 mm

Similar boards
- 2 layers90.2 × 48.3 mm

- 2 layers100 × 67 mm

- 2 layers160 × 100 mm

CodyComputer
fjmilens3/cody-computer
Design files and source code for the Cody Computer.
59 parts64GPL-3.0 - 4 layers100 × 49.8 mm

- 2 layers81.3 × 96.5 mm

- 4 layers63.6 × 67.5 mm

PropellerPCB
tomkinsc/open-spectrometer
Code, mechanical designs, and electronic plans related to the OpenSpectrometer project.
76 parts30 - 2 layers108.4 × 70 mm

User Expansion
Ashet-Technologies/Home-Computer
A retro-inspired home-computer project.
858 parts20CERN-OHL-P-2.0 - 2 layers136.8 × 87 mm

Questions
How big is the OSAVC interface shield PCB?
It measures 101.6 × 53.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the OSAVC interface shield use?
39 parts, built around the 24LC256-I/P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the OSAVC interface shield KiCad files?
From the uccross/open-source-autonomous-vehicle-controller repository on GitHub, at the commit this page was made from: the board is Hardware/OSAVC interface shield/OSAVC interface shield.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the OSAVC interface shield design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).