2 layers17.8 × 34 mm
LinUSBConverter
uCAN-LIN/LinUSBConverter
Open source USB ↔ LIN bus dongle. LIN 2.1 master / slave / monitor, optically isolated, SLCAN compatible — no proprietary drivers.
29 parts93GPL-3.0
2 layers17.1 × 27.5 mm
UCLUCE PCB
uCAN-LIN/uCLUCE_PCB- Size
- 17.1 × 27.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 19
- Nets
- 21
- Pads
- 70
- Tracks, vias
- 284, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 13 Oct 2017
- Updated
- 13 Dec 2017
Overview
UCLUCE PCB is an open-source printed circuit board by uCAN-LIN, from the uCAN-LIN/uCLUCE_PCB repository on GitHub. It is a 2-layer board of 17.1 × 27.5 mm with 19 parts on 21 nets, routed with 284 tracks and 0 vias.
It is built around the PIC16F1455-I/ST, MCP2003B-E/SN and SMBD914E6327HTSA1. Its parts include 5 capacitors, 4 ICs, 3 resistors, 3 diodes and 3 connectors. It belongs with the PIC boards of this library.
Main components
3
PIC16F1455-I/ST
TSSOP-14-40℃~+85℃ 10bit 14KB 1KB 2.3V~5.5V 48MHz 5bit 8 8 Bit Built-in FLASH PIC TSSOP-14 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
MCP2003B-E/SN
SOIC-8-40℃~+125℃ 1 15uA 5.5V~30V Thermal shutdown protection、Bus fault protection、Local wake-up、Bus wake-up、Low-power mode、TXD timeout protection、Under-voltage detection、Slope control Transceiver ±25kV SOIC-8 LIN Transceivers ROHSMicrochip TechnologyLIN Transceivers
SMBD914E6327HTSA1
SOT-23Switching DiodesInfineon Technologies
Parts
19| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | SMBD914E6327HTSA1 | Diodes_SMD:D_SOT-23_ANK | D1, D3 |
| 1 | 0.47u | Capacitors_SMD:C_0603 | C1 |
| 1 | 100n | Capacitors_SMD:C_0603 | C3 |
| 1 | 1k | Resistors_SMD:R_0603 | R1 |
| 1 | 1u | Capacitors_SMD:C_0603 | C5 |
| 1 | 220p | Capacitors_SMD:C_0603 | C4 |
| 1 | 4,7k | Resistors_SMD:R_0603 | R2 |
| 1 | 470n | Capacitors_SMD:C_0603 | C2 |
| 1 | 50 | Resistors_SMD:R_0603 | R3 |
| 1 | Conn_01x05 | Pin_Headers:Pin_Header_Straight_1x05_Pitch2.54mm | ICS1 |
| 1 | DG468 | uCLUCE_PCB:TSOP6 | U4 |
| 1 | D_Schottky_Small | Diodes_SMD:D_SMA | D2 |
| 1 | MCP2003B-E/SN | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U2 |
| 1 | PIC16F1455-I/ST | Housings_SSOP:TSSOP-14_4.4x5mm_Pitch0.65mm | U1 |
| 1 | Screw_Terminal_01x03 | Connectors:AK300-3 | J1 |
| 1 | UART_TTL | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | P2 |
| 1 | USB_A | uCLUCE_PCB:USB_A_DS1097R | P1 |
| 1 | fiducial | uCLUCE_PCB:FICUCIAL_MIN | U3 |
Questions
How big is the UCLUCE PCB PCB?
It measures 17.1 × 27.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the UCLUCE PCB use?
19 parts, built around the PIC16F1455-I/ST, MCP2003B-E/SN and SMBD914E6327HTSA1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the UCLUCE PCB KiCad files?
From the uCAN-LIN/uCLUCE_PCB repository on GitHub, at the commit this page was made from: the board is uCLUCE_PCB.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the UCLUCE PCB design in my own project?
Its repository states no licence, so its author keeps all rights: ask uCAN-LIN before reusing the design.
Similar boards
- 2 layers41.1 × 16.3 mm
- 2 layers83.6 × 76.7 mm
- 2 layers41.7 × 32.2 mm
Gcormier megadesk megadesk
punkfab/pcb-corpus
235 real KiCad boards from open-source hardware repositories, prepared as a placement and routing benchmark
28 parts1 - 4 layers100.6 × 67.1 mm
- 2 layers42.2 × 32.8 mm
- 2 layers65 × 30 mm
- 2 layers43.9 × 27.7 mm
