2 layers65 × 100 mm
Second Board
MakerLabTunisia/CARVER_X5
CARVER X5 is an OpenSourceHarware 5 Axis CNC Carving Machine - by MakerLabTunisia
47 parts135CC-BY-SA-4.0
2 layers32 × 59.2 mm
ESC Base
Tynogc/ESC-BasePCBLoad-Switch PCB for two ESCs.
- Size
- 32 × 59.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 41
- Nets
- 33
- Pads
- 139
- Tracks, vias
- 512, 102
- Pours
- 14
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 23 Nov 2015
- Updated
- 4 Dec 2015
Overview
ESC Base is an open-source printed circuit board by Tynogc, from the Tynogc/ESC-BasePCB repository on GitHub. It is a 2-layer board of 32 × 59.2 mm with 41 parts on 33 nets, routed with 512 tracks and 102 vias.
It is built around the LTV-817, LM1084IS-5.0 and VND5E006ASPTR-E. Its parts include 12 resistors, 10 capacitors, 8 ICs, 8 connectors and 1 diode. It belongs with the robots and motor control boards of this library.
Main components
3
LTV-817
DIP-4-55℃~+110℃ 1 1.2V 100mV@20mA,1mA 200mW 35V 3us 4us 50% 50mA 50mA 5kV 600% 6V DC Phototransistor DIP-4 Transistor, Photovoltaic Output Optoisolators ROHSLite-OnTransistor, Photovoltaic Output Optoisolators
LM1084IS-5.0
D2PAK(TO-263-3)-40℃~+125℃ 1 1.5V@(5A) 10mA 25V 5A 5V 68dB@(120Hz) Fixed Positive D2PAK(TO-263-3) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
VND5E006ASPTR-E
PowerSO-16-40℃~+150℃ 2 4.5V~28V 5mΩ 70A Active High High Side Switch Short-Circuit Protection(SCP)、Over Voltage Protection、Undervoltage Protection(UVP)、Overcurrent Protection(OCP)、Over Temperature Protection PowerSO-16 Power Distribution Switches ROHSSTMicroelectronicsPower Distribution Switches
Parts
41| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10k | Resistors_SMD:R_0603_HandSoldering | R3, R4, R5, R8, R10, R12 |
| 5 | 1k | Resistors_SMD:R_0603_HandSoldering | R2, R6, R7, R9, R11 |
| 4 | 100n | Capacitors_SMD:C_0805_HandSoldering | C2, C3, C5, C10 |
| 4 | LTV-817 | toni:SO-4 | U3, U6, U7, U8 |
| 2 | 100nF | Capacitors_SMD:C_0805_HandSoldering | C6, C7 |
| 2 | 1n | Capacitors_SMD:C_0805_HandSoldering | C8, C9 |
| 2 | ACS712_30A | SMD_Packages:SOIC-8-N | U4, U5 |
| 2 | CONN_01X02 | sven:PowerPole_1x2 | P4, P5 |
| 2 | CONN_01X04 | sven:Pin_Header_BIG_1x04 | P6, P7 |
| 2 | CONN_01X05 | Socket_Strips:Socket_Strip_Straight_1x05 | P2, P3 |
| 1 | 10 | Resistors_SMD:R_0603_HandSoldering | R1 |
| 1 | 10µ | Capacitors_SMD:C_0805_HandSoldering | C1 |
| 1 | 33µ | Capacitors_SMD:c_elec_5x5.8 | C4 |
| 1 | CONN_01X02 | Socket_Strips:Socket_Strip_Straight_1x02 | P8 |
| 1 | CONN_01X03 | Socket_Strips:Socket_Strip_Straight_1x03 | P1 |
| 1 | D | Diodes_SMD:SOD-123 | D1 |
| 1 | LM1084IS-5.0 | toni:SOT223_GND_VO_VI | U1 |
| 1 | VND5E006ASPTR | sven:POWER_SO16 | U2 |
The 39 most common of 41 parts.
Questions
How big is the ESC Base PCB?
It measures 32 × 59.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ESC Base use?
41 parts, built around the LTV-817, LM1084IS-5.0 and VND5E006ASPTR-E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ESC Base KiCad files?
From the Tynogc/ESC-BasePCB repository on GitHub, at the commit this page was made from: the board is ESC-Base.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ESC Base design in my own project?
Its repository states no licence, so its author keeps all rights: ask Tynogc before reusing the design.
Similar boards
- 2 layers45.2 × 36.6 mm
KaffeeInterface v1
misteu/RPiCoffee
Modding / hacking of a coffee machine (DeLonghi ECAM 22.110.B Magnifica S) for IoT capabilities
50 parts64BSD-3-Clause - 2 layers197.3 × 121.2 mm
TeensyMaestro Main PCB
rimuadmin/TeensyMaestro-Hardware
Hardware for the TeensyMaestro
115 parts13CERN-OHL-P-2.0 - 2 layers110.5 × 90.8 mm
TeslaSMPS
devfabiosilva/TeslaSMPS
DIY: High Voltage Range Switching Mode Power Supply for Embedded and Solar systems
112 parts7Unlicense - 2 layers99.7 × 98.4 mm
Remote3
JeanRenier/Remoting-a-microBIT-X
A set of ESP32 based controllers to remote a µBIT-X transceiver over the internet
182 parts4 - 2 layers162.6 × 113 mm
Door module
fablabnbg/aussentueren
Hard- and Software for external doors of Hackerspaces
176 parts2GPL-3.0 - 2 layers50.8 × 78.7 mm
TW39-mit Powersave
rwobrecht/piTelex-contrib
Contributions (hardware, software) around piTelex
29 parts2GPL-3.0 - 2 layers49.5 × 34.5 mm
