Skip to the content
2 layers197.3 × 121.2 mmTeensyMaestro Main PCB, the printed circuit board in 3D

Hardware for the TeensyMaestro

Size
197.3 × 121.2 mm
Copper layers
2
Thickness
1.6 mm
Parts
115
Nets
118
Pads
440
Tracks, vias
1,159, 184
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
8 Aug 2025
Updated
9 Nov 2025

Overview

TeensyMaestro Main PCB is an open-source printed circuit board by rimuadmin, from the rimuadmin/TeensyMaestro-Hardware repository on GitHub, published under the CERN-OHL-P-2.0 licence. It is a 2-layer board of 197.3 × 121.2 mm with 115 parts on 118 nets, routed with 1,159 tracks and 184 vias.

It is built around the DEV-16771, LTV-817 and MCP23017-E/SP, with the B2B-XH-A(LF)(SN), PEC11L-4120F-S0020 and B5B-XH-A(LF)(SN) among its other parts. Its parts include 63 capacitors, 15 connectors, 13 switches, 8 resistors and 6 ICs.

Main components

8

README

README.md

TeensyMaestro Front Panel and PCB

Assembled TeensyMaestro

What Is TeensyMaestro?

The TeensyMaestro is a custom-built hardware controller first designed by Len (KD0RC) to interface with FlexRadio transceivers - specifically models in the 6000 and 8000 series. It performs some, but not all, of the common functions that the SmartSDR app or the Flex Maestro perform. The name TeensyMaestro comes from its core component: the Teensy 4.1 microcontroller, which powers the device. Len's initial version was built using point-to-point wiring which presented a challenge for builders. Len (KD0RC) and Simon (NV0E) have created a PCB and matching front panel that simplifies the build process.

What Is This Project?

This repository describes the version 2 PCB and Front Panel hardware. The intent of this PCB is to simplify the build process, make it easier to produce a polished final product, and replace some components with less expensive alternatives. It has detailed instructions that describe how to order parts, build and assemble a TeensyMaestro using the version 2 hardware.

The documentation for building the PCB and Front panel is here:

TeensyMaestro Hardware Wiki

Len's firmware that supports all versions is available here:

TeensyMaestro for Flex 6000 Radios

Len's GitHub page has a detailed user manual that explains how to operate the TeensyMaestro and build instructions for version 1.

Parts

115
QtyValueFootprintReferences
59100nFCapacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mmC1, C2, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24 +43
9B2B-XH-A_LF__SN_Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalJ16, J17, J18, J19, J20, J21, J26, J27, J35
6MountingHoleMountingHole:MountingHole_2.5mm_PadH1, H2, H3, H4, H5, H6
41825910-6RIMU_Switches:3ETH9120S1, S2, S3, S4
41KResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1, R2, R3, R4
41nFCapacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mmC9, C10, C25, C26
4PEC11L-4120F-S0020RIMU_Encoders:PEC11L4115FS0020_NRSW2, SW3, SW9, SW10
4PEC11L-4120F-S0020RIMU_Encoders:PEC11L4115FS0020_VNRSW4, SW5, SW7, SW8
24K7Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR7, R8
2B5B-XH-A_LF__SN_Connector_JST:JST_XH_B5B-XH-A_1x05_P2.50mm_VerticalJ2, J4
2Conn_01x10Connector_JST:JST_XH_B10B-XH-A_1x10_P2.50mm_VerticalJ36, J37
2MCP23008-xPPackage_DIP:DIP-18_W7.62mmU4, U5
1100Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR5
11KResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_VerticalR6
13V3TestPoint:TestPoint_Loop_D2.54mm_Drill1.5mm_BeadedTP2
15VTestPoint:TestPoint_Loop_D2.54mm_Drill1.5mm_BeadedTP1
1B3B-XH-A_LF__SN_Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_VerticalJ22
1B4B-PH-K-S_LF__SN_Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_VerticalJ28
1DEV-16771Teensy:MODULE_DEV-16771U1
1GNDTestPoint:TestPoint_Loop_D2.54mm_Drill1.5mm_BeadedTP3
1LTV-817digikey-footprints:DIP-4_W7.62mmU3
1MCP23017-E_SPPackage_DIP:DIP-28_W7.62mm_Socket_LongPadsU7
1MSP4021-ST7796SRIMU_Display_Graphic:MSP4021-ST7796S-TMU2
1PEC11L-4120F-S0020RIMU_Encoders:PEC11L4115FS0020SW11

The 114 most common of 115 parts.

Similar boards

  • 2 layers100 × 65 mmAstroplant AL, the printed circuit board in 3D

    Astroplant AL

    AstroPlant/astroplant-hardware

    Raw data files for hardware PCB's

    102 parts3
  • 4 layers95.5 × 91 mmBrain PCB, the printed circuit board in 3D

    Brain PCB

    oudehm/seniorDesignPCB

    Editable KiCad projects for the brain, light, power, and pump boards.

    86 parts
  • 4 layers64 × 115 mmAmp board, the printed circuit board in 3D

    Amp board

    splogdes/Audio-Engine-A5-Input-Stage

    198 parts
  • 4 layers60 × 105 mmWalkman - Blobject, the printed circuit board in 3D

    Walkman - Blobject

    ProccyBoi/kiku

    kiku is an open-source portable audio player built around an STM32H523 microcontroller. The project combines Bluetooth audio, local microSD playback, FM radio, a colour display, headphone and speaker outputs, battery…

    142 parts
  • 2 layers55 × 45 mmRaw seed, the printed circuit board in 3D

    Raw seed

    misko/prompt2device

    The separate vNext PCB skill and orchestrator package is available alongside the reference workflow below; existing projects keep their accepted toolchain until an explicit migration.

    33 parts3MIT
  • 6 layers91.6 × 50.6 mmSmokebreak, the printed circuit board in 3D

    Smokebreak

    offgridevices/offgrid-hardware

    Open hardware from OffGrid Devices. One folder per board. CERN-OHL-S.

    208 partsCERN-OHL-S-2.0

Questions

How big is the TeensyMaestro Main PCB PCB?

It measures 197.3 × 121.2 mm and has 2 copper layers, 1.6 mm thick.

What parts does the TeensyMaestro Main PCB use?

115 parts, built around the DEV-16771, LTV-817, MCP23017-E/SP and B2B-XH-A(LF)(SN). The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the TeensyMaestro Main PCB KiCad files?

From the rimuadmin/TeensyMaestro-Hardware repository on GitHub, at the commit this page was made from: the board is TeensyMaestro Main PCB/TeensyMaestro Main PCB.kicad_pcb and its schematic TeensyMaestro Front Panel/TeensyMaestro Front Panel.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the TeensyMaestro Main PCB design in my own project?

Its repository publishes it under the CERN-OHL-P-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).