

Ortho40
40% ortho with a display in the middle
- Size
- 284 × 84 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 135
- Nets
- 107
- Pads
- 623
- Tracks, vias
- 897, 58
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 17 Aug 2022
- Updated
- 23 Sep 2025
Overview
Ortho40 is an open-source printed circuit board by twitch0001, from the twitch0001/ortho40 repository on GitHub, published under the MIT licence. It is a 2-layer board of 284 × 84 mm with 135 parts on 107 nets, routed with 897 tracks and 58 vias.
It is built around the RP2040, W25Q128JVSIQ and USBLC6-2SC6. Its parts include 48 diodes, 17 capacitors, 7 resistors, 5 ICs and 2 connectors. It belongs with the RP2040 boards of this library.
Main components
3RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)W25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASHUSBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)
README
README.mdortho40
RP2040 Based Ortholinear 40% keyboard with a display connected to companion software.
Inspired by ChrisChrisLoLo/keezyboost40 (additional Keys & QMK support)
Parts
135| Qty | Value | Footprint | References |
|---|---|---|---|
| 48 | D_Small | Diode_SMD:D_SOD-123 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +32 |
| 48 | MX-NoLED | MX_Alps_Hybrid:MX-1U-NoLED | MX1, MX2, MX10, MX11, MX12, MX13, MX14, MX15, MX16, MX17, MX18, MX19, MX20, MX21, MX22, MX23 +32 |
| 10 | 100nF | Capacitor_SMD:C_0402_1005Metric | C1, C5, C6, C9, C10, C11, C12, C13, C14, C15 |
| 4 | 1uF | Capacitor_SMD:C_0402_1005Metric | C2, C3, C4, C8 |
| 4 | MountingHole_2.2mm_M2 | MountingHole:MountingHole_2.2mm_M2 | MH1, MH2, MH3, MH4 |
| 3 | 1k | Resistor_SMD:R_0402_1005Metric | R1, R6, R7 |
| 2 | 22pF | Capacitor_SMD:C_0402_1005Metric | C16, C17 |
| 2 | 27R | Resistor_SMD:R_0402_1005Metric | R2, R3 |
| 2 | 5k1 | Resistor_SMD:R_0402_1005Metric | R4, R5 |
| 1 | 10uF | Capacitor_SMD:C_0402_1005Metric | C7 |
| 1 | 12MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 500mA | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | BOOTSEL | Button_Switch_SMD:SW_Push_SPST_NO_Alps_SKRK | SW1 |
| 1 | LOGO | LOGO | G*** |
| 1 | RP2040 | Footprints:RP2040-QFN-56 | U1 |
| 1 | ST7735S_1.8inch | Footprints:DFR0928 | U5 |
| 1 | SWD | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U4 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J2 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U3 |
| 1 | XC6206PxxxMR | Package_TO_SOT_SMD:SOT-23 | U2 |
Similar boards
- 2 layers42 × 67 mm

- 2 layers307.7 × 89.2 mm

- 2 layers352.5 × 120 mm

PyKey87
jpconstantineau/PyKey60
The PyKey60 is a custom programmable mechanical keyboard with a standard ANSI 60% keyboard layout compatible with any cases made for the GH60. The PyKey60 uses mechanical switches (Cherry MX type).
310 parts57 - 4 layers141.9 × 131.1 mm

- 2 layers84.2 × 100 mm

Fabpack out v5 8
yuz207/agentpad13
agentpad13 — open-source 13-key macropad for agentic work (RP2040, vial-qmk, planar joystick, Raw HID agent-status protocol)
126 parts41 - 4 layers277.2 × 107.5 mm

Katia
ikajdan/katia
A split keyboard with 6 by 3 column staggered keys and 3 thumb keys, based on the Crkbrd design
230 parts33CERN-OHL-P-2.0 - 2 layers234.6 × 172.5 mm

- 4 layers93.5 × 118.6 mm

RD56
lhm0/rotating_display_color
56 LED rotating color display with RP2040 and ESP32 microcontrollers
266 parts25
Questions
How big is the Ortho40 PCB?
It measures 284 × 84 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Ortho40 use?
135 parts, built around the RP2040, W25Q128JVSIQ and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ortho40 KiCad files?
From the twitch0001/ortho40 repository on GitHub, at the commit this page was made from: the board is pcb/ortho40.kicad_pcb and its schematic pcb/matrix.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ortho40 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).