Button transmitter
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 41
- Nets
- 37
- Pads
- 135
- Tracks, vias
- 397, 40
- Pours
- 9
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 24 Mar 2024
- Updated
- 27 Oct 2025
Overview
Button transmitter is an open-source printed circuit board by twfth9, from the twfth9/CW-Tracker repository on GitHub. It is a 2-layer board with 41 parts on 37 nets, routed with 397 tracks and 40 vias.
It is built around the ATTINY416-MN, TLV61070ADBV and SI5351B-B-GM1, with the TPS22919DCK, CR2032 and MMUN2238LT1G(TP) among its other parts. Its parts include 11 resistors, 10 capacitors, 5 ICs, 3 diodes and 2 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
6ATTINY416-MN
QFN-20-EP(3x3)-40℃~+105℃ 1.8V~5.5V 10bit 128Byte 18 20MHz 256Byte 4KB 8 Bit 8bit AVR Built-in FLASH QFN-20-EP(3x3) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)TLV61070ADBV
SOT-23-6-40℃~+125℃@(TJ) 1 2.2V~5.5V 2.5A 3uA 500mV~5.5V 550kHz、1MHz Adjustable Boost Boost Built-in Yes SOT-23-6 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersSI5351B-B-GM1
QFN-16(3x3)QFN-16(3x3) Clock Generators, PLLs, Frequency Synthesizers ROHSSkyworks SolutionsClock Generators / Frequency Synthesizers / PLLTPS22919DCK
SC-70-6-40℃~+125℃ 1 1.5A 1.6V~5.5V 89mΩ Active High Load Switch Output discharge function、Soft-start、Overcurrent Protection、Over temperature protection、Short-Circuit Protection SC-70-6 Power Distribution Switches ROHSTexas InstrumentsPower Distribution SwitchesCR2032
-- Unclassified goods ROHSMaxellUncategorisedMMUN2238LT1G(TP)
SOT-23SOT-23 Digital Transistors ROHSTECH PUBLICDigital Transistors
Parts
41| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100nF | Library:Worthington_C_0402_1005Metric | C1, C2, C4, C6, C7, C8 |
| 3 | 10uF | Library:Worthington_C_0402_1005Metric | C3, C5, C9 |
| 2 | 10 | Library:Worthington_R_0402_1005Metric | R5, R6 |
| 2 | RED | Library:Worthington_LED_0402_1005Metric | D1, D3 |
| 1 | 0R | Library:Worthington_R_0402_1005Metric | R4 |
| 1 | 1.27mm Pogo Pads For Programming & Debug | Library:2x3_1.27mm_Pogo_Header | J2 |
| 1 | 100 | Library:Worthington_R_0402_1005Metric | R11 |
| 1 | 100k | Library:Worthington_R_0402_1005Metric | R9 |
| 1 | 100mH | Inductor_THT:L_Axial_L12.0mm_D5.0mm_P15.24mm_Horizontal_Fastron_MISC | L1 |
| 1 | 10k | Library:Worthington_R_0402_1005Metric | R1 |
| 1 | 18k | Library:Worthington_R_0402_1005Metric | R10 |
| 1 | 1M | Library:Worthington_R_0402_1005Metric | R7 |
| 1 | 1k8 | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 1k8 | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 220 | Library:Worthington_R_0402_1005Metric | R8 |
| 1 | 22uF | Capacitor_SMD:C_0603_1608Metric | C10 |
| 1 | 25MHz | Library:Crystal_SMD_Kyocera_CX3225SB-4Pin_3.2x2.5mm | Y1 |
| 1 | 4.7uH | Inductor_SMD:L_0805_2012Metric | L2 |
| 1 | 7BB-20-3 | Library:Buzzer_Pad_POS | BZ1 |
| 1 | 7BB-20-3 | Library:Buzzer_Pad_NEG | BZ2-1 |
| 1 | ATtiny416-M | Package_DFN_QFN:VQFN-20-1EP_3x3mm_P0.4mm_EP1.7x1.7mm | U3 |
| 1 | Antenna Screw Pad | Library:RF_Solder_Pad | J1 |
| 1 | CR2032 | Library:BatteryHolder_Keystone_3034_1x20mm_CUTOUT | BT1 |
| 1 | Case | Library:Case_CR2032 | U4 |
| 1 | ESD156B1W | Diode_SMD:D_0201_0603Metric | D2 |
| 1 | LOGO | Library:Logo_10mm_inv | G*** |
| 1 | LOGO | Library:IPL_Logo_3mm | G*** |
| 1 | LOGO | Library:IPL_Logo_10mm | G*** |
| 1 | MMUN2238LT1G | Package_TO_SOT_SMD:SOT-23-3 | Q1 |
| 1 | Si5351B-B-GM1 | Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.45x1.45mm | U2 |
| 1 | TLV61070ADBV | Package_TO_SOT_SMD:SOT-23-6 | U5 |
| 1 | TPS22919DCK | Package_TO_SOT_SMD:SOT-363_SC-70-6 | U1 |
More from twfth9/CW-Tracker
3- 4 layers

- 2 layers59.6 × 55.9 mm

- 2 layers42 × 21 mm

Similar boards
- 4 layers13.6 × 41.4 mm

- 2 layers32.5 × 20.6 mm

- 2 layers112.7 × 114.2 mm

- 4 layers20.7 × 25.9 mm

Skin optoelectronics module
Roboy/roboy-skin-electronics
Parent repo which contains all the boards and schematics related to the light skin project.
80 parts - 2 layers15 × 9 mm

- 2 layers4.7 × 52.9 mm

Single key keyboard
AeroX2/aerox2.github.io
One repository and npm installation builds the workshop at jamesridey.dev and the professional site at cv.jamesridey.dev.
26 parts - 8 layers424.5 × 336.3 mm

- 2 layers82 × 55 mm

Questions
What parts does the Button transmitter use?
41 parts, built around the ATTINY416-MN, TLV61070ADBV, SI5351B-B-GM1 and TPS22919DCK. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Button transmitter KiCad files?
From the twfth9/CW-Tracker repository on GitHub, at the commit this page was made from: the board is Transmitter/KiCAD/Button Transmitter/Prototypes/Si5351B-ATtiny416 Dev A/button_transmitter.kicad_pcb and its schematic Transmitter/KiCAD/220MHz Oscillator/220_MHz_Oscillator.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Button transmitter design in my own project?
Its repository states no licence, so its author keeps all rights: ask twfth9 before reusing the design.