
TEST newWheelBoard
tuftselectricracing/FormulaHybrid2020
Files and such for Hormula Hybrid 2020

Files and such for Hormula Hybrid 2020
Motherboard is an open-source printed circuit board by tuftselectricracing, from the tuftselectricracing/FormulaHybrid2020 repository on GitHub. It is a 2-layer board of 203.2 × 76.2 mm with 74 parts on 101 nets, routed with 854 tracks and 106 vias.
It is built around the ATMEGA328P-PU, CD4050BD and 74HC00D, with the 74HC14 and CD40109BE among its other parts. Its parts include 18 capacitors, 13 fuses, 12 connectors, 11 resistors and 6 ICs. It belongs with the computers and single-board computers boards and the AVR (ATmega, ATtiny) boards of this library.
Files and such for Formula Hybrid 2020
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 10k | Resistors_SMD:R_0805_HandSoldering | R1, R2, R3, R4, R5, R6, R11 |
| 7 | C | Capacitors_SMD:C_0805_HandSoldering | C7, C8, C13, C14, C15, C16, C17 |
| 5 | 1u | Resistors_SMD:R_0805_HandSoldering | C1, C2, C4, C5, C6 |
| 5 | C | Resistors_SMD:R_0805_HandSoldering | C9, C10, C11, C12, C18 |
| 4 | Conn_01x01 | TuftsRacing2018:MountingPadM3 | J9, J10, J11, J12 |
| 4 | Q_NMOS_GDS | TO_SOT_Packages_SMD:TO-252-2 | Q1, Q2, Q3, Q4 |
| 4 | R | Resistors_SMD:R_0805_HandSoldering | R7, R8, R9, R10 |
| 3 | Conn_01x14_Male | TuftsRacing2018:AMP14 | J3, J4, J5 |
| 1 | .1u | Resistors_SMD:R_0805_HandSoldering | C3 |
| 1 | 5V_FUSE | Fuse_Holders_and_Fuses:BladeFuse-Mini_Keystone_3568 | F1 |
| 1 | 74HC00 | Housings_DIP:DIP-14_W8.89mm_SMDSocket_LongPads | U2 |
| 1 | 74HC14 | Housings_DIP:DIP-14_W8.89mm_SMDSocket_LongPads | U6 |
| 1 | ATMEGA328P-PU | Housings_DIP:DIP-28_W8.89mm_SMDSocket_LongPads | U4 |
| 1 | BATTERY_FAN_FUSE | Fuse_Holders_and_Fuses:BladeFuse-Mini_Keystone_3568 | F4 |
| 1 | BMS_FLYBACK | Diodes_SMD:D_SOT-23_ANK | D4 |
| 1 | BMS_FUSE | Fuse_Holders_and_Fuses:BladeFuse-Mini_Keystone_3568 | F2 |
| 1 | BMS_OK | LEDs:LED_0603_HandSoldering | D3 |
| 1 | BMS_RELAY | Relays_THT:Relay_SPDT_OMRON-G5LE-1 | K3 |
| 1 | BRK_LIGHT_FUSE | Fuse_Holders_and_Fuses:BladeFuse-Mini_Keystone_3568 | F5 |
| 1 | CD40109 | Housings_DIP:DIP-16_W8.89mm_SMDSocket_LongPads | U5 |
| 1 | CD4050 | Housings_DIP:DIP-16_W8.89mm_SMDSocket_LongPads | U3 |
| 1 | Conn_01x04_Male | Connectors_Molex:Molex_MiniFit-JR-5556-04A_2x02x4.20mm_Straight | J2 |
| 1 | Conn_01x06_Male | Connectors_Molex:Molex_MiniFit-JR-5556-06A_2x03x4.20mm_Straight | J8 |
| 1 | Conn_01x16_Male | Connectors_Molex:Molex_MiniFit-JR-5556-16A_2x08x4.20mm_Straight | J1 |
| 1 | Crystal | Crystals:Crystal_SMD_HC49-SD_HandSoldering | Y1 |
| 1 | DAQ_FUSE | Fuse_Holders_and_Fuses:BladeFuse-Mini_Keystone_3568 | F11 |
| 1 | FTDI | Pin_Headers:Pin_Header_Straight_1x06_Pitch2.54mm | J6 |
| 1 | ICSP | Pin_Headers:Pin_Header_Straight_2x03_Pitch2.54mm | J7 |
| 1 | IMD_FLYBACK | Diodes_SMD:D_SOT-23_ANK | D2 |
| 1 | IMD_FUSE | Fuse_Holders_and_Fuses:BladeFuse-Mini_Keystone_3568 | F12 |
| 1 | IMD_LATCH | Relays_THT:Relay_SPDT_OMRON-G5LE-1 | K2 |
| 1 | IMD_OK | LEDs:LED_0603_HandSoldering | D1 |
| 1 | IMD_RELAY | Relays_THT:Relay_SPDT_OMRON-G5LE-1 | K1 |
| 1 | LAP_TIMER_FUSE | Fuse_Holders_and_Fuses:BladeFuse-Mini_Keystone_3568 | F8 |
| 1 | LM7805_TO220 | Power_Integrations:TO-220 | U1 |
| 1 | PUMP_FUSE | Fuse_Holders_and_Fuses:BladeFuse-Mini_Keystone_3568 | F7 |
| 1 | RADIATOR_FAN_FUSE | Fuse_Holders_and_Fuses:BladeFuse-Mini_Keystone_3568 | F6 |
| 1 | RTDS_FUSE | Fuse_Holders_and_Fuses:BladeFuse-Mini_Keystone_3568 | F3 |
| 1 | SD_FUSE | Fuse_Holders_and_Fuses:BladeFuse-Mini_Keystone_3568 | F13 |
| 1 | SEVCON_FUSE | Fuse_Holders_and_Fuses:BladeFuse-Mini_Keystone_3568 | F9 |
| 1 | SW_Push | Buttons_Switches_SMD:SW_SPST_PTS645 | SW1 |
| 1 | SW_SPDT | TO_SOT_Packages_THT:TO-220-3_Vertical | SW2 |
| 1 | WHEEL_FUSE | Fuse_Holders_and_Fuses:BladeFuse-Mini_Keystone_3568 | F10 |

tuftselectricracing/FormulaHybrid2020
Files and such for Hormula Hybrid 2020



tuftselectricracing/FormulaHybrid2020
Files and such for Hormula Hybrid 2020


diegodierick/Heater-shield
This repository contains code and design files for a four channel Arduino based heater.

lisasnt/Position-and-Temperature-Controller
Embedded Systems BSs course Project




benkrasnow/DSKY_EL_replica
Schematic, PCB layout, mechanical CAD, and firmware to create a replica of the DSKY with electroluminescent display

It measures 203.2 × 76.2 mm and has 2 copper layers, 1.6 mm thick.
74 parts, built around the ATMEGA328P-PU, CD4050BD, 74HC00D and 74HC14. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the tuftselectricracing/FormulaHybrid2020 repository on GitHub, at the commit this page was made from: the board is motherboard/archive/MotherboardDesign2018/Motherboard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask tuftselectricracing before reusing the design.