

Esp8266
- Size
- 36.8 × 41.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 15
- Nets
- 23
- Pads
- 69
- Tracks, vias
- 140, 0
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 22 Jun 2017
- Updated
- 4 Jul 2018
Overview
Esp8266 is an open-source printed circuit board by tuankiet65, from the tuankiet65/pnc-modules repository on GitHub. It is a 2-layer board of 36.8 × 41.3 mm with 15 parts on 23 nets, routed with 140 tracks and 0 vias.
It is built around the ESP-12E and LD1117S33CTR-HXY. Its parts include 5 resistors, 3 connectors, 2 capacitors, 2 ICs and 2 switches. It belongs with the ESP8266 boards of this library.
Main components
2ESP-12E
SMD,24x16mm-20℃~+70℃ -90dBm 16dBm 170mA 2.4GHz 3V~3.6V 56mA 802.11b/g/n ESP8266 Chip On-board PCB Antenna Over-the-air (OTA) update UART、SPI、I2C SMD,24x16mm WiFi Modules ROHSAi-ThinkerWiFi ModulesLD1117S33CTR-HXY
SOT-223-20℃~+85℃ 1.3V@(800mA) 15V 2mA 3.3V 800mA Fixed Over Temperature Protection SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSHXY MOSFETVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
15| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 10k | Resistors_SMD:R_1206_HandSoldering | R1, R2, R3, R4, R5 |
| 1 | 100n | Capacitors_SMD:C_1206_HandSoldering | C1 |
| 1 | 10u | Capacitors_SMD:C_1206_HandSoldering | C2 |
| 1 | CONNECTOR | Connectors_JST:JST_XH_S04B-XH-A_04x2.50mm_Angled | J1 |
| 1 | ESP-12E | ESP8266:ESP-12E_SMD | U1 |
| 1 | FLASH_PROG | Buttons_Switches_THT:SW_PUSH_6mm | SW2 |
| 1 | LD1117S33CTR | TO_SOT_Packages_SMD:SOT-223 | U2 |
| 1 | ROW_1 | Pin_Headers:Pin_Header_Straight_1x09_Pitch2.54mm | J3 |
| 1 | ROW_2 | Pin_Headers:Pin_Header_Straight_1x08_Pitch2.54mm | J4 |
| 1 | RST | Buttons_Switches_THT:SW_PUSH_6mm | SW1 |
The 14 most common of 15 parts.
More from tuankiet65/pnc-modules
12- 2 layers100.3 × 67.3 mm

- 2 layers100.3 × 100.3 mm

- 2 layers74.9 × 44.5 mm

- 2 layers74.9 × 44.5 mm

- 2 layers40.6 × 15.9 mm

- 2 layers62.9 × 34.3 mm

- 2 layers50.8 × 26.7 mm

- 2 layers51.4 × 16.5 mm

- 2 layers41.3 × 25.4 mm

- 2 layers36.2 × 16.5 mm

- 2 layers44.5 × 16.5 mm

- 2 layers50.2 × 34.9 mm

Similar boards
- 2 layers50 × 50 mm

- 2 layers95.3 × 53.3 mm

- 2 layers64.8 × 36.8 mm

- 2 layers35 × 57.5 mm

- 2 layers77 × 100 mm

- 4 layers72.4 × 95.3 mm

DingoPDM
corygrant/dingoPDM
Hardware - dingoPDM is an open source, affordable automotive PDM (Power Distribution Module). Pre-assembled and tested units are available or the design can be used to build a DIY version.
156 parts128MIT - 4 layers43.4 × 25.4 mm

R820t2 breakout
emeb/r820t2
Breakout PCB design and STM32F0 firmware for the Rafael R820T2 tuner chip
83 parts85 - 4 layers40 × 40 mm

CANBoard
corygrant/CANBoard
Hardware - CAN enabled small input / output expansion board. Switch panels, steering wheel buttons/knobs, etc.
83 parts53MIT
Questions
How big is the Esp8266 PCB?
It measures 36.8 × 41.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Esp8266 use?
15 parts, built around the ESP-12E and LD1117S33CTR-HXY. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Esp8266 KiCad files?
From the tuankiet65/pnc-modules repository on GitHub, at the commit this page was made from: the board is schematic/esp8266/esp8266.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Esp8266 design in my own project?
Its repository states no licence, so its author keeps all rights: ask tuankiet65 before reusing the design.