2 layers100.3 × 100.3 mm
2 layers100.3 × 67.3 mm
Pnc modules
tuankiet65/pnc-modules- Size
- 100.3 × 67.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 83
- Nets
- 71
- Pads
- 272
- Tracks, vias
- 919, 88
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 22 Jun 2017
- Updated
- 4 Jul 2018
Overview
Pnc modules is an open-source printed circuit board by tuankiet65, from the tuankiet65/pnc-modules repository on GitHub. It is a 2-layer board of 100.3 × 67.3 mm with 83 parts on 71 nets, routed with 919 tracks and 88 vias.
It is built around the LD1117S33CTR-HXY and SS34. Its parts include 30 capacitors, 19 resistors, 16 connectors, 7 diodes and 3 ICs. It belongs with the STM32 boards of this library.
Main components
2
LD1117S33CTR-HXY
SOT-223-20℃~+85℃ 1.3V@(800mA) 15V 2mA 3.3V 800mA Fixed Over Temperature Protection SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSHXY MOSFETVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
SS34
SMA(DO-214AC)-55℃~+125℃ 3A 40V 500uA@40V 550mV@3A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
Parts
83| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 100n | Capacitors_SMD:C_1206_HandSoldering | C1, C2, C16, C18, C19, C20, C21, C22, C23, C24, C25, C26, C27, C28, C29, C30 |
| 9 | 10k | Resistors_SMD:R_1206_HandSoldering | R10, R11, R13, R14, R15, R16, R17, R18, R19 |
| 6 | 100n | Capacitors_SMD:C_1206 | C6, C7, C8, C10, C15, C17 |
| 5 | 220 | Resistors_SMD:R_1206_HandSoldering | R1, R2, R3, R4, R5 |
| 3 | GREEN | LEDs:LED_1206_HandSoldering | D2, D5, D6 |
| 2 | 10u | Capacitors_SMD:C_1206_HandSoldering | C4, C5 |
| 2 | 2.2u | Capacitors_SMD:C_1206 | C3, C12 |
| 2 | 22 | Resistors_SMD:R_1206_HandSoldering | R7, R8 |
| 2 | 5.6p | Capacitors_SMD:C_0805_HandSoldering | C13, C14 |
| 2 | 560 | Resistors_SMD:R_1206_HandSoldering | R6, R9 |
| 1 | 10u | Capacitors_SMD:C_1206 | C9 |
| 1 | 12MHz | Crystals:Crystal_SMD_3225-4pin_3.2x2.5mm_HandSoldering | Y1 |
| 1 | 1u | Capacitors_SMD:C_1206 | C11 |
| 1 | 2k2 | Resistors_SMD:R_0805_HandSoldering | R12 |
| 1 | 600 | Inductors_SMD:L_0805_HandSoldering | L1 |
| 1 | ANALOG | Connectors_JST:JST_XH_S04B-XH-A_04x2.50mm_Angled | J14 |
| 1 | BLUE | LEDs:LED_1206_HandSoldering | D3 |
| 1 | BOOT0 | Buttons_Switches_THT:SW_PUSH_6mm | SW1 |
| 1 | Barrel_Jack | Connectors:BARREL_JACK | J17 |
| 1 | DIGITAL_1 | Connectors_JST:JST_XH_S04B-XH-A_04x2.50mm_Angled | J5 |
| 1 | DIGITAL_2 | Connectors_JST:JST_XH_S04B-XH-A_04x2.50mm_Angled | J6 |
| 1 | DIGITAL_3 | Connectors_JST:JST_XH_S04B-XH-A_04x2.50mm_Angled | J7 |
| 1 | DIGITAL_4 | Connectors_JST:JST_XH_S04B-XH-A_04x2.50mm_Angled | J8 |
| 1 | I2C_1 | Connectors_JST:JST_XH_S04B-XH-A_04x2.50mm_Angled | J9 |
| 1 | I2C_2 | Connectors_JST:JST_XH_S04B-XH-A_04x2.50mm_Angled | J10 |
| 1 | I2C_3 | Connectors_JST:JST_XH_S04B-XH-A_04x2.50mm_Angled | J11 |
| 1 | I2C_4 | Connectors_JST:JST_XH_S04B-XH-A_04x2.50mm_Angled | J12 |
| 1 | LD1117S33CTR | TO_SOT_Packages_SMD:SOT-223 | U2 |
| 1 | LD1117S50CTR | TO_SOT_Packages_SMD:SOT-223 | U3 |
| 1 | LOGO | anime_silkscreen:anime_silkscreen_bitmap2comp | G*** |
| 1 | RED | LEDs:LED_1206_HandSoldering | D1 |
| 1 | RST | Buttons_Switches_THT:SW_PUSH_6mm | SW3 |
| 1 | SS34 | Diodes_SMD:D_SMB | D7 |
| 1 | STM32F405RGTx | Housings_QFP:LQFP-64_10x10mm_Pitch0.5mm | U1 |
| 1 | SWD | Pin_Headers:Pin_Header_Angled_1x06_Pitch2.54mm | J15 |
| 1 | UART_1 | Connectors_JST:JST_XH_S04B-XH-A_04x2.50mm_Angled | J1 |
| 1 | UART_2 | Connectors_JST:JST_XH_S04B-XH-A_04x2.50mm_Angled | J2 |
| 1 | UART_3 | Connectors_JST:JST_XH_S04B-XH-A_04x2.50mm_Angled | J3 |
| 1 | UART_4 | Connectors_JST:JST_XH_S04B-XH-A_04x2.50mm_Angled | J4 |
| 1 | USB_OTG | Connectors:USB_Micro-B | J13 |
| 1 | USR | Buttons_Switches_THT:SW_PUSH_6mm | SW2 |
| 1 | WHITE | LEDs:LED_1206_HandSoldering | D4 |
The 81 most common of 83 parts.
More from tuankiet65/pnc-modules
12- 2 layers74.9 × 44.5 mm
- 2 layers36.8 × 41.3 mm
- 2 layers74.9 × 44.5 mm
- 2 layers40.6 × 15.9 mm
- 2 layers62.9 × 34.3 mm
- 2 layers50.8 × 26.7 mm
- 2 layers51.4 × 16.5 mm
- 2 layers41.3 × 25.4 mm
- 2 layers36.2 × 16.5 mm
- 2 layers44.5 × 16.5 mm
- 2 layers50.2 × 34.9 mm
Similar boards
- 4 layers159.6 × 161 mm
Shack interface
PE1RGU/hf-antenna-switch
Remote HF antenna switch: 3 radios x 4 antennas (path to 8), outdoor relay unit with a hardware safety chain, controlled over Cat6 from a shack interface. KiCad 10, open hardware, designed together with an AI.
290 parts2CERN-OHL-S-2.0 - 2 layers77 × 100 mm
- 4 layers72.4 × 95.3 mm
DingoPDM
corygrant/dingoPDM
Hardware - dingoPDM is an open source, affordable automotive PDM (Power Distribution Module). Pre-assembled and tested units are available or the design can be used to build a DIY version.
156 parts128MIT - 4 layers43.4 × 25.4 mm
R820t2 breakout
emeb/r820t2
Breakout PCB design and STM32F0 firmware for the Rafael R820T2 tuner chip
83 parts85 - 4 layers40 × 40 mm
CANBoard
corygrant/CANBoard
Hardware - CAN enabled small input / output expansion board. Switch panels, steering wheel buttons/knobs, etc.
83 parts53MIT - 2 layers19 × 106 mm
- 2 layers74.8 × 84.7 mm
- 2 layers138.8 × 55 mm
MuxPi
SamsungSLAV/muxpi
MuxPi is an open hardware and open software board which was designed to aid in automating tasks on physical devices.
354 parts22Apache-2.0
Questions
How big is the Pnc modules PCB?
It measures 100.3 × 67.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pnc modules use?
83 parts, built around the LD1117S33CTR-HXY and SS34. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pnc modules KiCad files?
From the tuankiet65/pnc-modules repository on GitHub, at the commit this page was made from: the board is schematic/main_board/main_board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pnc modules design in my own project?
Its repository states no licence, so its author keeps all rights: ask tuankiet65 before reusing the design.