2 layers39.4 × 17.8 mm
2 layers58 × 84 mm
FCC64
ttahsin-bey/FCC6415Final Chess Card - Forum64 Edition
- Size
- 58 × 84 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 53
- Nets
- 106
- Pads
- 413
- Tracks, vias
- 1,735, 187
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 11 Jun 2017
- Updated
- 31 Mar 2020
Overview
FCC64 is an open-source printed circuit board by ttahsin-bey, from the ttahsin-bey/FCC64 repository on GitHub. It is a 2-layer board of 58 × 84 mm with 53 parts on 106 nets, routed with 1,735 tracks and 187 vias.
It is built around the 27C256-17/J, ICS525-01R and TPS3613-01DGS. Its parts include 23 capacitors, 12 resistors, 7 ICs, 2 diodes and 2 switches. It belongs with the FPGA and CPLD boards of this library.
Main components
327C256-17/J
-0℃~+70℃ 256Kbit 4.5V~5.5V EPROM Parallel Port (Parallel) - Non-Volatile Memory (ROM)Microchip TechnologyNon-Volatile Memory (ROM)
ICS525-01R
SSOP-28SSOP-28 Clock Generators, PLLs, Frequency Synthesizers ROHSRenesas ElectronicsClock Generators, PLLs, Frequency Synthesizers
TPS3613-01DGS
MSOP-10-40℃~+85℃@(TA) 1 60ms Active High、Active Low Battery Backup Circuit Push-pull MSOP-10 Supervisor and Reset ICs ROHSTexas InstrumentsSupervisor And Reset ICs
README
README.mdFCC64
Final Chess Card - Forum64 Edition
Current Design:
Recent Prototype:
Parts
53| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | 100nF | TTB_MyLib:TTB_C0603 | C3, C4, C5, C6, C7, C8, C10, C11, C12, C13, C17, C18, C20, C21, C22, C23 +1 |
| 5 | 2k2 | TTB_MyLib:TTB_R0603 | R8, R9, R10, R11, R12 |
| 4 | 100k | TTB_MyLib:TTB_R0603 | R1, R2, R3, R4 |
| 2 | 10nF | TTB_MyLib:TTB_C0603 | C16, C19 |
| 2 | 10µ | TTB_MyLib:TTB_C1206 | C1, C2 |
| 2 | 18pF | TTB_MyLib:TTB_C0603wide | C14, C15 |
| 2 | 1N4148 | TTB_MyLib:TTB_D0603 | D1, D2 |
| 2 | 27C256 | TTB_MyLib:TTB_DIL28 | U1, U5 |
| 1 | 12MHz | TTB_MyLib:TTB_7A | X1 |
| 1 | 1k15 | TTB_MyLib:TTB_R0603 | R7 |
| 1 | 33R | TTB_MyLib:TTB_R0603 | R5 |
| 1 | 3V | TTB_MyLib:TTB_Batteriehalter | BT1 |
| 1 | 3k4 | TTB_MyLib:TTB_R0603 | R6 |
| 1 | 62256 | TTB_MyLib:TTB_TSOP1_28 | U6 |
| 1 | ATF1504AS | TTB_MyLib:TTB_TQFP100 | U2 |
| 1 | C64-Expansionport | TTB_MyLib:TTB_C64_Expansionport | Y1 |
| 1 | DIP-Switch | TTB_MyLib:TTB_DIPSwitch3 | S1 |
| 1 | Hole | TTB_MyLib:TTB_Hole4,8mm | MH1 |
| 1 | Hole | TTB_MyLib:TTB_Hole3,1mm | MH2 |
| 1 | ICS525-01 | TTB_MyLib:TTB_TSSOP28 | U4 |
| 1 | JTAG | Pin_Headers:Pin_Header_Straight_2x05_Pitch2.00mm | P1 |
| 1 | Reset | TTB_MyLib:TTB_Pushbutton_3305 | SW1 |
| 1 | TPS3613-01 | TTB_MyLib:TTB_MSOP10 | U7 |
| 1 | Test | Measurement_Points:Measurement_Point_Round-SMD-Pad_Small | |
| 1 | W65C02S_TQFP | TTB_MyLib:TTB_W65C02 | U3 |
Similar boards
- 2 layers19.5 × 21 mm
8701DUO
tomse/8701DUO
MOS8701 replacement module with a jumper to select NTSC or PAL having a dual-clock.
12 partsGPL-3.0 - 4 layers184.9 × 243.8 mm
Project NuXT
monotech/NuXT
MicroATX Turbo XT Motherboard, with VGA, Floppy, CF, Serial
223 parts121GPL-3.0 - 2 layers104.1 × 87.6 mm
- 2 layers237.7 × 146.1 mm
- 4 layers318.4 × 124.5 mm
- 2 layers100 × 77.5 mm
- 4 layers337.6 × 105.7 mm
ISA CGA
hkzlab/CGA_Redux
The Color Graphics Adapter Redux board is a more or less faithful clone of the original IBM CGA, based on the original schematics
170 parts56
Questions
How big is the FCC64 PCB?
It measures 58 × 84 mm and has 2 copper layers, 1.6 mm thick.
What parts does the FCC64 use?
53 parts, built around the 27C256-17/J, ICS525-01R and TPS3613-01DGS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the FCC64 KiCad files?
From the ttahsin-bey/FCC64 repository on GitHub, at the commit this page was made from: the board is KiCad/FCC64.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the FCC64 design in my own project?
Its repository states no licence, so its author keeps all rights: ask ttahsin-bey before reusing the design.