

RP2354A
- Size
- 60.7 × 61.8 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 51
- Nets
- 64
- Pads
- 215
- Tracks, vias
- 520, 102
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 17 Jan 2026
- Updated
- 14 Feb 2026
Overview
RP2354A is an open-source printed circuit board by tstills, from the tstills/RP2354A repository on GitHub. It is a 4-layer board of 60.7 × 61.8 mm with 51 parts on 64 nets, routed with 520 tracks and 102 vias.
It is built around the LM1117-ADJ and ABM8-272-T3. Its parts include 21 capacitors, 12 resistors, 5 diodes, 4 connectors and 3 ICs. It belongs with the RP2040 and RP2350 boards of this library.
Main components
2LM1117-ADJ
SOT-2231 1.2V~5V 1.3V@(1000mA) 15V 1A 2mA Adjustable Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHShongjiachengUncategorisedABM8-272-T3
SMD3225-4P-40℃~+85℃ 10pF 12MHz 50Ω SMD crystal oscillator ±30ppm ±30ppm SMD3225-4P Crystals ROHSAbraconCrystals
Parts
51| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C2, C3, C4, C5, C8, C9, C13, C15, C16, C17, C18, C22, C24, C25 |
| 4 | 330 | Resistor_SMD:R_0402_1005Metric | R8, R11, R12, R13 |
| 4 | 4.7uF | Global-Footprints:0402 Big Ceramic Capacitor | C1, C6, C7, C21 |
| 4 | Mounting Hole | Global-Footprints:Mounting Hole | H1, H2, H3, H4 |
| 4 | ~ | Global-Footprints:LED 0603 | D2, D3, D4, D5 |
| 2 | 5.1kΩ | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | JST-SH 3 Pin 1mm Side Entry | Global-Footprints:JST-SH 3 Pin 1mm Side Entry | J2, J3 |
| 1 | 0 | Resistor_SMD:R_0402_1005Metric | R7 |
| 1 | 100uF | Capacitor_SMD:C_1206_3216Metric | C12 |
| 1 | 10uF | Global-Footprints:0402 Big Ceramic Capacitor | C10 |
| 1 | 150Ω | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | 1k | Resistor_SMD:R_0402_1005Metric | R10 |
| 1 | 1uF | Global-Footprints:0402 Big Ceramic Capacitor | C27 |
| 1 | 3.3uH | Inductor_SMD:L_1008_2520Metric | L2 |
| 1 | 33 | Resistor_SMD:R_0402_1005Metric | R9 |
| 1 | 330Ω | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | 390Ω | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | 64MBit PSRAM | Global-Footprints:PSRAM 64Mbit | U5 |
| 1 | ABM8-272-T3 | Global-Footprints:ABM8-272-T3 | X1 |
| 1 | LM1117-ADJ | Global-Footprints:LM1117-ADJ | U2 |
| 1 | Pi Pico Socket | Global-Footprints:Pi Pico Socket | J1 |
| 1 | RP2354A4 | Global-Footprints:RP2354A | U4 |
| 1 | TVS Diode | Global-Footprints:TVS Diode | D1 |
| 1 | USB Power Only | Global-Footprints:USB-C Power Only | J6 |
Similar boards
- 2 layers100 × 80 mm

- 2 layers240 × 194 mm

Infinitas
freeDSP/freeDSP-INFINITAS
USB Audio Class 2 compliant audio interface with up to 32 input and up to 32 output channels and optional ADAU1452 DSP.
1,020 parts35 - 2 layers134.6 × 106.4 mm

Renovation ssi 2001
roybaer/renovation_ssi_2001
Innovation SSI-2001 replica that can be built without vintage components
95 parts26 - 2 layers53 × 42.5 mm

- 2 layers144.8 × 101.6 mm

Stebus
laurent-fr/z180
This is my attempt to create a 80's style computer based on the Zilog Z180 CPU
89 parts5 - 2 layers99.9 × 99.8 mm

GR BreadBoardBuddy
GadgetReboot/Breadboard_Buddy
PCB with power supplies, audio amp, LEDs, pots and level shifters to make breadboarding easier.
161 parts3 - 2 layers100.1 × 100.1 mm

AMP PCBv2
Autonomous-Motorsports-Purdue/AMP_PCBv2
Files relating to version 2 of the PCB for AMP kart
116 parts1 - 2 layers70 × 66 mm

Questions
How big is the RP2354A PCB?
It measures 60.7 × 61.8 mm and has 4 copper layers, 1.6 mm thick.
What parts does the RP2354A use?
51 parts, built around the LM1117-ADJ and ABM8-272-T3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RP2354A KiCad files?
From the tstills/RP2354A repository on GitHub, at the commit this page was made from: the board is RP2354A.kicad_pcb and its schematic RP2354A.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the RP2354A design in my own project?
Its repository states no licence, so its author keeps all rights: ask tstills before reusing the design.