Skip to the content
2 layers144.8 × 101.6 mmStebus, the printed circuit board in 3D

This is my attempt to create a 80's style computer based on the Zilog Z180 CPU

Size
144.8 × 101.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
89
Nets
57
Pads
489
Tracks, vias
1,466, 5
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
1 Dec 2019
Updated
17 May 2020

Overview

Stebus is an open-source printed circuit board by laurent-fr, from the laurent-fr/z180 repository on GitHub. It is a 2-layer board of 144.8 × 101.6 mm with 89 parts on 57 nets, routed with 1,466 tracks and 5 vias.

It is built around the LM1117-ADJ. Its parts include 52 resistors, 8 capacitors, 8 connectors, 6 diodes and 1 IC.

Main components

1

README

README.md

Micro Z180 homebrew computer

The computer

This is my attempt to create a 80's style computer based on the Zilog Z180 CPU.

The goal is to build from scratch a complete computer, with keyboard, video display, and mass storage. The software will be Microsoft BASIC and CP/M. Think of it as a crossover between an Amstrad CPC and an IBM PC 5150 !

The computer is designed around STEBUS, which is an old but well designed 8-bits industry-standard bus (https://en.wikipedia.org/wiki/STEbus).

For now there are 5 cards :

  • PSU : the power supply, which takes 12v as input and generates +5v and -12v
  • BUS : the STEBUS base board, with 5 slots and active termination
  • CPU : The main CPU board, with 2 RS-232 connectors
  • VDU : Video display unit, VGA text-only 80x25 with 16 colors, and 8 fonts selectable via jumpers on the board
  • MIO : Multi I/O, including PS/2 keyboard, Real time clock, Sound , Compact flash and Parallel port

There are 3 main folders in this reposirory :

  • enclosure : all the files needed to build the case, which is laser-cut 3mm transparent acrylic (all parts are smaller than 200x300 mm), with a 3D printed part to mechanicaly guide the boards.
  • hardware : the description of all boards (very incomplete for now !)
  • software : Tests, BIOS, BASIC, and CP/M (coming soon !)

Licenses

All the software is GPL v2, and all the hardware is CC-BY-NC-SA

Status of the computer

This is a work-in-progress !

For now the computer is running BASIC with the PS/2 keyboard and integrated video display. There are still some rough edges but we are almost here.

Some files are not yet on the repository because the computer was designed with paper and pencil !

Parts

89
QtyValueFootprintReferences
49270Resistors_SMD:R_1206_HandSolderingR2, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23, R24 +33
6100nFCapacitors_SMD:C_1206_HandSolderingC2, C4, C5, C6, C7, C8
5DIN41612-a+cmylib:Socket_DIN41612-CaseC1-AC-Female-64Pin-2rowsJ1, J2, J3, J4, J5
5D_SchottkyDiodes_SMD:D_SMAD1, D2, D3, D4, D5
2RCapacitors_SMD:C_1206_HandSolderingR51, R52
2TestPointPin_Headers:Pin_Header_Straight_1x01_Pitch2.54mmTP1, TP2
1100uFCapacitors_SMD:C_1812_HandSolderingC3
110uFCapacitors_SMD:C_1210_HandSolderingC1
1220Resistors_SMD:R_1206_HandSolderingR1
1Conn_01x02_MalePin_Headers:Pin_Header_Straight_1x02_Pitch2.54mmJ8
1Conn_01x02_MaleConnectors_Molex:Molex_KK-6410-02_02x2.54mm_StraightJ7
1Conn_01x05_Malemylib:Molex_MiniFit-JR-5556-10A_1x05x4.20mm_StraightJ6
1DDiodes_SMD:D_MiniMELF_HandsolderingD6
1LM1117-ADJTO_SOT_Packages_SMD:SOT-223-3_TabPin2U1

The 77 most common of 89 parts.

More from laurent-fr/z180

1
  • 2 layers160 × 100 mmZ180, the printed circuit board in 3D

    Z180

    laurent-fr/z180

    This is my attempt to create a 80's style computer based on the Zilog Z180 CPU

    15 parts5

Similar boards

  • 2 layers100 × 80 mmScuznet, the printed circuit board in 3D

    Scuznet

    saybur/scuznet

    Open source hardware emulating a SCSI to Ethernet adapter.

    103 parts39GPL-3.0
  • 2 layers240 × 194 mmInfinitas, the printed circuit board in 3D

    Infinitas

    freeDSP/freeDSP-INFINITAS

    USB Audio Class 2 compliant audio interface with up to 32 input and up to 32 output channels and optional ADAU1452 DSP.

    1,020 parts35
  • 2 layers134.6 × 106.4 mmRenovation ssi 2001, the printed circuit board in 3D

    Renovation ssi 2001

    roybaer/renovation_ssi_2001

    Innovation SSI-2001 replica that can be built without vintage components

    95 parts26
  • 2 layers53 × 42.5 mmPower board, the printed circuit board in 3D

    Power board

    nbacon0/OP1-1

    Repository for the Optical 1:1 reader aka the OP1:1

    28 parts6GPL-3.0
  • 2 layers99.9 × 99.8 mmGR BreadBoardBuddy, the printed circuit board in 3D

    GR BreadBoardBuddy

    GadgetReboot/Breadboard_Buddy

    PCB with power supplies, audio amp, LEDs, pots and level shifters to make breadboarding easier.

    161 parts3
  • 2 layers100.1 × 100.1 mmAMP PCBv2, the printed circuit board in 3D

    AMP PCBv2

    Autonomous-Motorsports-Purdue/AMP_PCBv2

    Files relating to version 2 of the PCB for AMP kart

    116 parts1
  • 2 layers70 × 66 mmMinisumo rv1g-2021, the printed circuit board in 3D

    Minisumo rv1g-2021

    rv1g-robotics-club/sumo-2022

    Sumo Robot version 2022 source files

    75 parts1
  • 2 layers69.2 × 48.3 mmN64, the printed circuit board in 3D

    N64

    Tordek/tdk64

    A PIC-based N64-to-USB adapter.

    36 parts1GPL-3.0

Questions

How big is the Stebus PCB?

It measures 144.8 × 101.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Stebus use?

89 parts, built around the LM1117-ADJ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Stebus KiCad files?

From the laurent-fr/z180 repository on GitHub, at the commit this page was made from: the board is hardware/stebus/stebus.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Stebus design in my own project?

Its repository states no licence, so its author keeps all rights: ask laurent-fr before reusing the design.