Skip to the content
6 layers85.9 × 77.5 mmFrob2354, the printed circuit board in 3D

The Frob, An Apple II Atari 2600 Development System, re-made as an RP2354 based device.

Size
85.9 × 77.5 mm
Copper layers
6
Thickness
1.6 mm
Parts
80
Nets
143
Pads
442
Tracks, vias
1,025, 550
Pours
13
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
3 Oct 2026
Updated
3 Oct 2026

Overview

Frob2354 is an open-source printed circuit board by tschak909, from the tschak909/frob-modern repository on GitHub. It is a 6-layer board of 85.9 × 77.5 mm with 80 parts on 143 nets, routed with 1,025 tracks and 550 vias.

It is built around the RP2354B, SN74LVC245APWR(LX) and SN74LVC1G0832DBVR-TP, with the SN74LVC1G32DBVR, AP2112K-3.3TRG1 and CC0603KRX7R9BB104 among its other parts. Its parts include 32 capacitors, 14 resistors, 8 ICs, 5 diodes and 3 connectors. It belongs with the retro computing and games boards and the RP2350 boards of this library.

Main components

12

README

hardware/README.md

Frob2354 hardware

KiCad 10 project. Every KiCad file here is generated from tools/design.py (parts, values, MPN/LCSC codes, every pin's net) and tools/placement.py; edit those and regenerate, not the schematic or board. The generator toolchain is FujiNet-NES-Rev0's (fujinet-hardware), adapted to a 6-layer Apple II card.

Rebuild

Needs KiCad 10 (kicad-cli + the pcbnew Python module), Python 3 + numpy, Java and Freerouting 2.4.1 (~/.local/share/freerouting/freerouting-2.4.1.jar).

sh
tools/build_all.sh            # schematic, ERC, netlist checks, BOM, PDF
LAYOUT=1 tools/build_all.sh   # + placement, routing, DRC, gerbers, CPL, renders
steptool
symbolsharvest_symbols.py -> tools/symcache.sexpr (stock KiCad symbols, flattened)
footprintsmake_a2edge_fp.py (Apple 50-pin edge); the rest are stock KiCad / FujiNet-NES footprints in Frob2354.pretty
schematicgen_sch.py + sch_layout.py + sch_route.py: a block-diagram root (Apple slot -> RP2354B -> 2600 cable, power below, joined by buses) and four wired sheets -- parts placed by hand in sch_layout.py, every connection drawn by an orthogonal router, parallel buses as KiCad buses, rails as power symbols, signals that leave a sheet as hierarchical labels
connectivitycompare_netlists.py tools/reference-netlist.xml: the drawing produces exactly the reference connectivity (the netlist only changes when design.py does; refresh the reference then)
checkskicad-cli sch erc; check_nets.py: the netlist against ../firmware/src/frob_pins.h, the Apple slot pin-out, the original FROB J2 pin-out and the buffer-enable logic -- independent of design.py
boardgen_pcb.py (outline, placement, finger stubs, plane fan-out, RP core copper, zones), finish_route.py --lock (RP core corner), finish_route.py --nets=... (slot fingers), route.py (Freerouting), via_in_pad.py (boxed-in RP pins), drc_fix.py, finish_route.py, tidy_tracks.py, stitch_gnd.py
outputsexport.py: BOM, JLCPCB BOM + CPL, gerbers + drill zip, schematic PDF, renders

Board

  • Apple II peripheral card in the original FROB card's frame (the reverse-engineered a2board.kicad_pcb): the same 65.4 x 7.62 mm tab, the same rear edge; the front is cut back (85.9 x 69.85 mm body).
  • Fingers: 0.1 in pitch, 1.52 x 7.32 mm, pins 1-25 on the component side (pin 1 toward the front of the computer), 26-50 behind them on the solder side, pin N opposite 51-N. check_nets.py asserts this from the footprint.
  • Stack-up (FujiNet-NES-Rev0's): F.Cu signals + GND pour / In1 GND / In2 + In3 signals / In4 +3V3 (DVDD island under the RP2354B core) / B.Cu signals + GND pour. A 4-layer version (two signal layers) was tried first: Freerouting and the finisher left ~16 connections open around the RP2354B's 0.4 mm pin rows.
  • J2 (FROB cable): DIP-24 0.6 in socket, original pin-out (2732 EPROM order; /CE = A12 inverted on the cable adapter, /OE grounded there, pin 24 open).

Ordering at JLCPCB

exports/jlcpcb/: Frob2354-gerbers.zip, BOM-JLCPCB.csv, CPL-JLCPCB.csv.

  • PCB: 6 layers, 1.6 mm, ENIG, gold fingers: yes, bevelled edge (45 deg): yes, impedance control not needed. Via covering: epoxy filled and capped (via-in-pad) -- ten RP2354B signal pads carry a 0.25/0.15 mm via (tools/via_in_pad.py); JLCPCB's 6-layer process includes it.
  • Assembly: top side, Economic or Standard; every assembled part has an LCSC code (the extended ones: RP2354B, 74LVC245A, 74LVC1G0832, 74LVC1G32, AP2112K, AO3401A, USB-C, inductor, crystal, switches). Check the placement preview for pin 1 of U1-U8, the USB-C and the diodes.
  • Hand-solder J2: a 24-pin 0.6 in DIP socket (e.g. Mill-Max 110-43-624-41-001000, or any turned-pin socket).

Files

Frob2354.kicad_pro/.kicad_sch/.kicad_pcbthe project (generated)
apple.kicad_sch, mcu.kicad_sch, vcs.kicad_sch, power.kicad_schthe four sheets (Apple slot, RP2354B, 2600 cable, power / USB)
tools/relink_pcb.pyrenames board nets / re-points footprints after a schematic redraw, copper untouched (used once, when the drawing became hierarchical: local nets gained sheet paths such as /mcu/XIN)
Frob2354.pretty, Frob2354.kicad_symproject footprints / symbols
datasheets/datasheets used in the review (manifest.json; PDFs not committed)
docs/schematic PDF, layout SVGs, renders

Parts

80
QtyValueFootprintReferences
22100nFFrob2354:C_0603_1608MetricC1, C2, C3, C10, C11, C14, C15, C16, C21, C22, C23, C24, C29, C30, C31, C32 +6
510kFrob2354:R_0603_1608MetricR3, R10, R12, R13, R14
44x100kFrob2354:R_Array_Convex_4x0603RN1, RN2, RN3, RN4
474LVC245AFrob2354:TSSOP-20_4.4x6.5mm_P0.65mmU2, U5, U6, U7
31kFrob2354:R_0603_1608MetricR2, R4, R9
34.7uFFrob2354:C_0603_1608MetricC13, C17, C18
3ESD5Z5.0T1GFrob2354:D_SOD-523D1, D2, D3
3Fiducial_1mm_Mask2mmFrob2354:Fiducial_1mm_Mask2mmFID1, FID2, FID3
210uFFrob2354:C_0603_1608MetricC12, C28
215pFFrob2354:C_0603_1608MetricC19, C20
21uFFrob2354:C_0603_1608MetricC25, C27
227RFrob2354:R_0603_1608MetricR7, R8
25.1kFrob2354:R_0603_1608MetricR5, R6
1100kFrob2354:R_0603_1608MetricR11
112MHzFrob2354:Crystal_SMD_3225-4Pin_3.2x2.5mmY1
122uFFrob2354:C_0805_2012MetricC26
13.3uHFrob2354:RPI_L_AOTA-B201610S3R3L1
133RFrob2354:R_0603_1608MetricR1
174LVC1G0832Frob2354:SOT-23-6U3
174LVC1G32Frob2354:SOT-23-5U8
1AO3401AFrob2354:SOT-23Q1
1AP2112K-3.3Frob2354:SOT-23-5U4
1Apple2_Slot_Edge_50Frob2354:Apple2_Slot_Edge_50J1
1BOOTSELFrob2354:SW_SPST_TL3342SW2
1FROB cableFrob2354:DIP-24_W15.24mm_SocketJ2
1GNDFrob2354:TestPoint_Pad_D1.5mmTP3
1GP23Frob2354:TestPoint_Pad_D1.5mmTP4
1PHI0Frob2354:TestPoint_Pad_D1.5mmTP5
1RESETFrob2354:SW_SPST_TL3342SW1
1RP2354BFrob2354:QFN-80-1EP_10x10mm_P0.4mm_EP3.4x3.4mmU1
1SS34Frob2354:D_SMAD5
1SWCLKFrob2354:TestPoint_Pad_D1.5mmTP1
1SWDIOFrob2354:TestPoint_Pad_D1.5mmTP2
1USB-CFrob2354:USB_C_Receptacle_HRO_TYPE-C-31-M-12J3
1VCEFrob2354:TestPoint_Pad_D1.5mmTP6
1greenFrob2354:LED_0603_1608MetricD4

Similar boards

  • 6 layers100 × 110 mmFujiNet NES Rev0, the printed circuit board in 3D

    FujiNet NES Rev0

    FujiNetWIFI/fujinet-hardware

    Schematics and design files for FujiNet hardware

    118 parts142
  • 4 layers96.9 × 88.1 mmDigichiver, the printed circuit board in 3D

    Digichiver

    frindaddy/digichiver

    Archival hardware/firmware for the MM54104 Digitalker chip

    121 partsMIT
  • 4 layers38.9 × 23.3 mmOWL - Rotor v2, the printed circuit board in 3D

    OWL - Rotor v2

    sedlak477/owl-hardware

    Hardware design files and build instructions for the OWL platform

    118 partsCERN-OHL-P-2.0
  • 4 layers64 × 80 mmIris brainstem, the printed circuit board in 3D

    Iris brainstem

    HeyPCB/iris-brainstem

    Iris Brainstem: power and servo hub of the Iris robot head. 9 V USB-C PD in, 6 V / 5 A servo rail in stitched copper zones (measured), 5 V rail, half-duplex servo bus with ten ports, speaker amp.

    97 partsCERN-OHL-S-2.0
  • 4 layers58 × 70 mmProbelab, the printed circuit board in 3D

    Probelab

    enkhbold470/kicad-projects

    Five KiCad 10 boards (4- and 6-layer): ESP32-S3 industrial gateway, USB-C PD bench supply, RP2040 logic analyzer, FOC motor controller, iCE40 FPGA board.

    88 partsCERN-OHL-S-2.0
  • 4 layers118 × 76 mmSmart led badge, the printed circuit board in 3D

    Smart led badge

    zgeez/Pixel-Badge

    Wearable 32x32 LED badge with Zephyr firmware, BLE control, passive NFC, and a Flutter Android app, built around a custom nRF52840 PCB.

    1,236 partsMIT
  • 6 layers37.9 × 37.9 mmOpenFC, the printed circuit board in 3D

    OpenFC

    OpenDrone-hw/OpenFC-Lite

    Open-source Betaflight flight controller. RP2354B, 30.5x30.5 mm, 6-layer, 3-8S, CERN-OHL-S-2.0.

    164 parts85CERN-OHL-S-2.0

Questions

How big is the Frob2354 PCB?

It measures 85.9 × 77.5 mm and has 6 copper layers, 1.6 mm thick.

What parts does the Frob2354 use?

80 parts, built around the RP2354B, SN74LVC245APWR(LX), SN74LVC1G0832DBVR-TP and SN74LVC1G32DBVR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Frob2354 KiCad files?

From the tschak909/frob-modern repository on GitHub, at the commit this page was made from: the board is hardware/Frob2354.kicad_pcb and its schematic hardware/Frob2354.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Frob2354 design in my own project?

Its repository states no licence, so its author keeps all rights: ask tschak909 before reusing the design.