4 layers82.3 × 55.3 mm
4 layers53.6 × 60 mm
DriversPCB
try-except/TitoSync- Size
- 53.6 × 60 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 33
- Nets
- 49
- Pads
- 143
- Tracks, vias
- 203, 251
- Pours
- 19
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 4 Sep 2025
- Updated
- 3 Dec 2025
Overview
DriversPCB is an open-source printed circuit board by try-except, from the try-except/TitoSync repository on GitHub. It is a 4-layer board of 53.6 × 60 mm with 33 parts on 49 nets, routed with 203 tracks and 251 vias.
It is built around the DRV8871DDA. Its parts include 10 resistors, 8 capacitors, 4 ICs and 1 connector.
Main components
1Parts
33| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100m | Resistor_SMD:R_1206_3216Metric | R2, R3, R5, R6, R8, R9 |
| 4 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C1, C2, C7, C8 |
| 3 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R7, R10 |
| 3 | DRV8411PWPR | Package_SO:HTSSOP-16-1EP_4.4x5mm_P0.65mm_EP3.4x5mm_Mask2.66x2.46mm | IC1, IC2, IC3 |
| 2 | 10uF | Capacitor_SMD:C_1206_3216Metric | C4, C5 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric | C6 |
| 1 | 30k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 47uF | Capacitor_SMD:CP_Elec_6.3x5.4 | C3 |
| 1 | DC_CTRL | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | DC_IN1 |
| 1 | DC_OUT | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type094_RT03502HBLU_1x02_P5.00mm_Horizontal | J3 |
| 1 | DRV8871DDA | Kicad_TitoSync_Footprints:VREG_LM5017MR_NOPB | U1 |
| 1 | Ground Pins | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | GND |
| 1 | LOGO | LOGO | G*** |
| 1 | POWER_IN | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type094_RT03502HBLU_1x02_P5.00mm_Horizontal | POWER_IN |
| 1 | STP1_CTRL | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | STP1 |
| 1 | STP1_OUT | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | STP1_OUT1 |
| 1 | STP2_CTRL | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | STP2 |
| 1 | STP2_OUT | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | STP2_OUT1 |
| 1 | STP3_CTRL | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | STP3 |
| 1 | STP3_OUT | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | STP3_OUT1 |
Questions
How big is the DriversPCB PCB?
It measures 53.6 × 60 mm and has 4 copper layers, 1.6 mm thick.
What parts does the DriversPCB use?
33 parts, built around the DRV8871DDA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DriversPCB KiCad files?
From the try-except/TitoSync repository on GitHub, at the commit this page was made from: the board is DriversPCB/DriversPCB.kicad_pcb and its schematic ActiveLoad/ActiveLoadPCB/ActiveLoadPCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the DriversPCB design in my own project?
Its repository states no licence, so its author keeps all rights: ask try-except before reusing the design.
More from try-except/TitoSync
3- 2 layers65.6 × 64.6 mm
- 2 layers97 × 150.9 mm
Similar boards
- 4 layers122.2 × 115.1 mm
Scan controller kicad
fwachsmuth/Filmkorn-Raw-Scanner
The Filmkorn Raw Scanner, turning 8mm and 16mm films into lossless 12-bit CinemaDNG
170 parts13MIT - 4 layers81.3 × 52.8 mm
- 2 layers65.6 × 56 mm
- 4 layers50 × 50 mm
Simpleboard
AlessioMorale/unav2_hardware
Initial test hardware for the future uNav board version
122 parts5MIT - 2 layers83.3 × 56.5 mm
- 4 layers123 × 56 mm
- 4 layers31.3 × 34 mm
- 2 layers93.1 × 158.3 mm
