2 layers55 × 25 mm
2 layers50 × 25 mm
Hc4053-header
tronixio/modules- Size
- 50 × 25 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 14
- Nets
- 15
- Pads
- 38
- Tracks, vias
- 62, 10
- Pours
- 40
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 18 Jun 2022
- Updated
- 4 Nov 2026
Overview
Hc4053-header is an open-source printed circuit board by tronixio, from the tronixio/modules repository on GitHub. It is a 2-layer board of 50 × 25 mm with 14 parts on 15 nets, routed with 62 tracks and 10 vias.
It is built around the 74HC4053D. Its parts include 3 switches, 2 capacitors, 2 ICs and 1 resistor.
Main components
1README
README.mdModules
GPIO Modules.
- Breadboard.
- TODO - 74HC595 - LED & Header.
- TODO - 74HC4053 - Header.
- TODO - DG509B - Header.
- TODO - LCD 4x20 Characters.
UART Modules.
I2C Modules.
SPI Modules.
Notes.
- DRAFT : Prototype OK, last check schematic, PCB & code can be modify.
- TODO : Work in progress, prototype was not good, hardware, PCB and code can be rework.
Parts
14| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 100n | tronixio:CAPACITOR-SMD-1206 | C2 |
| 1 | 10k | tronixio:RESISTOR-SMD-1206 | R1 |
| 1 | 10n | tronixio:CAPACITOR-SMD-1206 | C1 |
| 1 | 3M-SJ5376 | tronixio:3M-SJ5376 | U2 |
| 1 | 74HC4053 | tronixio:SOIC-16 | U1 |
| 1 | G*** | kibuzzard-62B2FE4D | kibuzzard-62B2FE4D |
| 1 | G*** | kibuzzard-63494430 | kibuzzard-63494430 |
| 1 | G*** | kibuzzard-62B2FE3C | kibuzzard-62B2FE3C |
| 1 | GND | tronixio:KEYSTONE-2000-3 | TP1 |
| 1 | GPIO IN | tronixio:HARWIN-M20-975064x | K1 |
| 1 | I/O | tronixio:HARWIN-M20-999034x | K2 |
| 1 | I/O | tronixio:HARWIN-M20-999064x | K3 |
| 1 | LOGO | tronixio:OSHW-3MM | G*** |
| 1 | LOGO | tronixio:OSHW-5MM | GT |
Questions
How big is the Hc4053-header PCB?
It measures 50 × 25 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Hc4053-header use?
14 parts, built around the 74HC4053D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Hc4053-header KiCad files?
From the tronixio/modules repository on GitHub, at the commit this page was made from: the board is Kicad/gpio-hc4053-header/hc4053-header.kicad_pcb and its schematic Kicad/gpio-breadbaord/main.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Hc4053-header design in my own project?
Its repository states no licence, so its author keeps all rights: ask tronixio before reusing the design.
More from tronixio/modules
6- 2 layers50 × 25 mm
- 2 layers50 × 25 mm
- 2 layers98 × 60 mm
- 2 layers50 × 25 mm
- 2 layers98 × 60 mm
Similar boards
- 2 layers100 × 100 mm
Sync ope
cyberboy666/sync_ope
effect send + sync restoring circuit - adapted from a gael jaton design
78 parts52 - 2 layers120 × 80 mm
TrackerAVL
brengi/CESE-PCB
Curso de Diseño de Circuitos Impresos de la Carrera de Especialización en Sistemas Embebidos
173 parts7 - 2 layers
- 2 layers100 × 95.9 mm
- 4 layers100 × 95 mm
VCF1 rev1
ModularMayhem/mmm
A eurorack filter created in collaboration by the modular mayhem DIY folks
201 parts2 - 4 layers100 × 50 mm
Pcm5102a mux board
cbaurtx/RetroBox
RetroBox is an internet radio using an ESP32-S3 system on a chip
86 parts - 2 layers165 × 170 mm
Dual ctrl an dig mux
Omnistic/aion_bypass_pcb
All the SELECT bits are common and a single SELECT signal is also taken from the Inscoper Device Controller. This signal effectively switches between AION control and Inscoper control (for the cameras and lasers).
57 partsMIT - 4 layers51.4 × 21.1 mm
