

Heawood42 MX hotswap
Files for the Heawood42 ortholinear split keyboard
- Size
- 298.7 × 121.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 116
- Nets
- 86
- Pads
- 718
- Tracks, vias
- 1,288, 121
- Pours
- 12
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 14 Mar 2024
- Updated
- 9 Aug 2025
Overview
Heawood42 MX hotswap is an open-source printed circuit board by triliu, from the triliu/Heawood42 repository on GitHub. It is a 2-layer board of 298.7 × 121.3 mm with 116 parts on 86 nets, routed with 1,288 tracks and 121 vias.
It is built around the SK6812MINI-E. Its parts include 41 inductors, 40 switches and 3 connectors. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdHeawood42
The Heawood42 is a diodeless 42-key ortho-linear split keyboard that uses any pro micro microcontroller. The Heawood42 utilises a new type of circuit design stemming from graph theory and mathematical design theory. All previous diodeless keyboards work using one pin per key, such as the sweep, which uses 17 pins to control 17 keys per side, the sweeeeep, which uses 17 pins to control 17 keys per side, the cantor, which uses 18 pins to control 18 keys per side, and the piantor, which uses 21 pins to control 21 keys per side. The first two keyboards can use any pro micro-style board (traditionally, the pro micro-style boards have 18 pins available, but one of these pins is required for communication among the halves). The third and fourth keyboard requires the use of a larger microcontroller, the BlackPills and the Raspberry Pi Pico, respectively.
The Heawood42 is the first split diodeless keyboard requiring fewer pins than keys. Each side uses 14 pins to control 21 keys. This means that even on a typical pro micro-style board, the Heawood42 may have inter-board communication, addressable RGB lights, and an OLED screen.
Due to its diodeless-ness, the Heawood42 is ideal in several cases, as it reduces the cost and complexity of making a custom mechanical keyboard.
Why 'Heawood'?
Typical mechanical keyboards arrange their keys in a grid pattern. In such a grid, there are cycles of four keys. If no diodes were used and three keys of a four-key cycle were pressed, the keyboard would act like all four keys were being pressed. See https://pcbheaven.com/wikipages/How_Key_Matrices_Works/ for an explainer of this phenomenon. By adding a diode to every key, the keyboard becomes "n-key rollover", meaning that the keyboard can theoretically distinguish all combinations of keypresses. In software, however, 6-key rollover is typically used, meaning the software assumes that if more than six keys are being pressed, then keys were pressed on accident. The USB keyboard protocol is limited to a 6-key rollover. For split keyboards, a 6-key rollover on each half is excessive, as typically one finger would only press one key at a time, and even a 5-key rollover is more than is needed.
In graph theory, it is possible to make graphs that do not contain small cycles. Each graph can be converted into a new type of key matrix, with differing characteristics. The Heawood graph is a graph that is the incidence graph of a projective plane of order 2, and has 14 vertices, 21 edges, and a girth of 6. For more details on this graph, see House of Graphs. This graph converts to a key matrix with just a 4-key rollover. However, by designing the board specifically, all problematic 5-key and 6-key sequences may be practically eliminated, yielding the Heawood42.
This design is powered using any pro micro-style microcontroller.
Versions
- Regular MX-hotswap version
- 19.05 x 19.05 spacing
- MX hot-swap style holes (requires 42 MX hot-swap sockets)
- Per-key RGB LEDs (optional)
- Choc-hotswap version
- 18 x 17 spacing
- Choc hot-swap style holes (requires 42 choc hot-swap sockets)
- Per-key RGB LEDs (optional)
Parts
116| Qty | Value | Footprint | References |
|---|---|---|---|
| 40 | SW_PUSH | PCM_marbastlib-xp-mx:SW_MX_HS_KS-2P02B01-01_1u | SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW21, SW22, SW23, SW24, SW25, SW26, SW31, SW32, SW33 +24 |
| 20 | SK6812MINI | Heawood_Kbd:LED_MX_6812miniE | L17, L21, L22, L23, L24, L25, L26, L27, L36, L37, r_L12, r_L13, r_L14, r_L15, r_L16, r_L31 +4 |
| 20 | SK6812MINI | Heawood_Kbd:LED_MX_6812miniE_rev | L11, L12, L13, L14, L15, L31, L32, L33, L34, L35, r_L17, r_L21, r_L22, r_L23, r_L24, r_L25 +4 |
| 14 | , , , , , , , , , , , , , | ||
| 8 | 5.5mm | PCM_marbastlib-various:mousebites_5p5mm_easysnap | MB5, MB5, MB5, MB5, MB5, MB5, MB5, MB5 |
| 2 | kbd:JPC2 | JP1, r_JP1 | |
| 2 | MJ-4PP-9 | PCM_marbastlib-xp-various:CON_MJ-4PP-9 | J2, r_J2 |
| 2 | ProMicro | kbd:ProMicro_v3.5 | r_U1, U1 |
| 2 | SW_PUSH | PCM_marbastlib-xp-mx:SW_MX_HS_KS-2P02B01-01_1.5u | r_SW27, SW27 |
| 2 | SW_PUSH | kbd:ResetSW | r_RSW1, RSW1 |
| 1 | OLED | kbd:OLED | J1 |
| 1 | SK6812MINI-e | Heawood_Kbd:LED_MX_6812miniE_rev | L16 |
| 1 | SK6812MINI-e | Heawood_Kbd:LED_MX_6812miniE | r_L11 |
| 1 | r_OLED | kbd:OLED | r_J1 |
More from triliu/Heawood42
4- 2 layers139.2 × 93.3 mm

- 2 layers147 × 100.9 mm

- 2 layers133.8 × 91.4 mm

- 2 layers133.8 × 91.4 mm

Similar boards
- 4 layers234 × 84 mm

Main panel
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
234 parts3kApache-2.0 - 4 layers180.8 × 300.3 mm

Dilemma
Bastardkb/Dilemma
The Dilemma is a vertical stagger low-profile keyboard with mods.
383 parts590 - 4 layers48 × 32 mm

FlatSat
Pwnsat/FlatSat
Flatsat v1.0 is a hardware based platform for aerospace cybersecurity research
106 parts575GPL-2.0 - 2 layers

Demo
adamws/kicad-kbplacer
KiCad plugin for automatic keyboard's key placement and routing
48 parts547GPL-3.0 - 2 layers97 × 78.5 mm

Dumbpad
imchipwood/dumbpad
Simple 4x4 numpad with rotary encoder. Powered by QMK via ATmega32u4 Pro Micro
62 parts517GPL-2.0 - 4 layers82.5 × 39.4 mm

V4head
makerforgetech/modular-biped
An open source framework for creating a bipedal modular companion robot.
26 parts493GPL-3.0 - 2 layers115.7 × 95.7 mm

- 4 layers70 × 54 mm

Questions
How big is the Heawood42 MX hotswap PCB?
It measures 298.7 × 121.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Heawood42 MX hotswap use?
116 parts, built around the SK6812MINI-E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Heawood42 MX hotswap KiCad files?
From the triliu/Heawood42 repository on GitHub, at the commit this page was made from: the board is MX-hotswap/Ver 0.3/Kicad/Heawood42_MX_hotswap.kicad_pcb and its schematic MX-hotswap/Ver 0.3/Kicad/Heawood42_MX_hotswap.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Heawood42 MX hotswap design in my own project?
Its repository states no licence, so its author keeps all rights: ask triliu before reusing the design.