Skip to the content
4 layers140 × 80 mm24V High Side Driver, the printed circuit board in 3D

24V High Side Driver

tracelabs-pcb/can-do12

4-Layer IC-Gate-Driver for industrial application - Kicad, TPS274160, CANBUS

Size
140 × 80 mm
Copper layers
4
Thickness
1.6 mm
Parts
147
Nets
144
Pads
567
Tracks, vias
785, 350
Pours
29
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
24 Mar 2026
Updated
27 Mar 2026

Overview

24V High Side Driver is an open-source printed circuit board by tracelabs-pcb, from the tracelabs-pcb/can-do12 repository on GitHub. It is a 4-layer board of 140 × 80 mm with 147 parts on 144 nets, routed with 785 tracks and 350 vias.

It is built around the LM65625SRZTRQ1, TPS274160ARLHR and STM32G0B1RET6N, with the TLV75533PDBV, TPD2EUSB30DRT and APTBD3216SURKCGKC-01 among its other parts. Its parts include 47 capacitors, 44 resistors, 9 ICs, 8 connectors and 7 diodes. It belongs with the interfaces and adapters boards and the STM32 boards of this library.

Main components

12

README

README.md

CAN-DO12 — 24V Aktor-Modul (12x High-Side Digital Outputs)

Status: PCB-Design abgeschlossen — unbestückt
Tool: KiCad | Layer: 4-Layer | Hersteller-ready: Ja


Projektbeschreibung

Kompaktes 24V-Aktormodul zur Ansteuerung von 12 digitalen Lasten im Labor- und Prüfstandsbetrieb. Ansteuerung über CAN 2.0B, zusätzlich USB-C Service-Port für Parametrierung und Diagnose. Entwickelt als Prototyp für Prüfstands- und Sondermaschinenbau.

Besonderheiten:

  • 12x High-Side Ausgänge (24V / 1A je Kanal)
  • CAN 2.0B (1 Mbit/s) + USB-C Full-Speed Device
  • TVS + Verpolschutz am 24V Eingang
  • ESD-Schutz an CAN und USB
  • 4-Layer Layout, 140×80mm, Hutschienen-tauglich

Hardware

KomponenteBeschreibung
MCUUSB FS + CAN (STM32-Familie)
Ausgangstreiber12x High-Side, 24V
SchnittstellenCAN 2.0B, USB-C, SWD
Versorgung18…30V DC, Buck → 3.3V
SchutzTVS, Verpolschutz, ESD
Stackup4-Layer (Signal / GND / PWR / Signal)
ToolKiCad

Anschlüsse

  • USB-C (kurze Kante, mittig)
  • DE-9 CAN-Stecker
  • 2-pol Schraubklemme 24V Eingang
  • 2x 8-pol Schraubklemme Ausgänge
  • SWD Header (2.54mm)
  • Jumper CAN-Terminierung 120Ω

Ausschlüsse

Kein Serienprodukt — kein CE/EMV, keine Safety-Anwendung, keine galvanische Trennung, keine Firmware.


Dateien in diesem Repository

  • /kicad/ — KiCad Projektdateien
  • /screenshots/ — PCB- und Schematic-Ansichten

Entwickelt von Shawn Schneider
— PCB-Design & Lötservice, Wolfsburg

Parts

147
QtyValueFootprintReferences
1910kΩResistor_SMD:R_0603_1608MetricR1, R2, R13, R17, R20, R21, R22, R23, R24, R25, R26, R27, R28, R29, R30, R31 +3
16100nFCapacitor_SMD:C_0603_1608MetricC1, C3, C5, C6, C7, C10, C15, C16, C17, C21, C25, C40, C42, C44, C45, C47
1222nFCapacitor_SMD:C_0603_1608MetricC27, C28, C29, C30, C31, C32, C33, C34, C35, C36, C37, C38
71µFCapacitor_SMD:C_0603_1608MetricC2, C4, C9, C11, C12, C20, C24
4100kΩResistor_SMD:R_0603_1608MetricR8, R12, R14, R15
41µFCapacitor_SMD:C_0805_2012MetricC14, C39, C41, C43
422ΩResistor_SMD:R_0603_1608MetricR3, R4, R9, R10
31,5kΩResistor_SMD:R_0603_1608MetricR35, R36, R37
31kΩResistor_SMD:R_0603_1608MetricR38, R39, R40
3APTBD3216SURKCGKC-01Eigene Footprints:APTBD3216SURKCGKC01D5, D6, D7
3TPS274160ARLHREigene Footprints:RLH0028A-MFGU5, U6, U7
21715789Eigene Footprints:1715789J4, J5
233ΩResistor_SMD:R_0603_1608MetricR41, R42
24,7µFCapacitor_SMD:C_0805_2012MetricC18, C19
247µFCapacitor_SMD:C_1206_3216MetricC22, C23
25,1kΩResistor_SMD:R_0603_1608MetricR5, R6
260,4ΩResistor_SMD:R_0603_1608MetricR43, R44
110nFCapacitor_SMD:C_0603_1608MetricC26
110µFCapacitor_SMD:C_0805_2012MetricC8
1120kΩResistor_SMD:R_0603_1608MetricR7
112V-24V_POWER1Eigene Footprints:1729128J3
112V-24V_POWER2Eigene Footprints:1729128J9
1200kΩResistor_SMD:R_0603_1608MetricR11
1270kΩResistor_SMD:R_0603_1608MetricR19
127kΩResistor_SMD:R_0603_1608MetricR18
13-106505-2Eigene Footprints:TE_3-106505-2J6
14.7 nF, X7R, 50 VCapacitor_SMD:C_0603_1608MetricC46
149,9kΩResistor_SMD:R_0603_1608MetricR16
1BLM21PG121SN1DResistor_SMD:R_0805_2012MetricFB2
1BOOT0_HIGHJumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mmJP1
1BZT52H-B15,115Diode_SMD:D_SOD-123FD2
1CAN_term_jmpConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ7
1EEU-FR1H470Eigene Footprints:CAPPRD250W55D630H1270C13
1IPD380P06NMATMA1Eigene Footprints:PG-TO252-3-313_INFQ1
1LM65625SRZTRQ1Eigene Footprints:RZT0020A-MFGU1
1Littelfuse SMF5.0ADiode_SMD:D_SOD-123D1
1MF-MSMF050/40X-2Eigene Footprints:MFNSMF07513X2F2
1PESD2CANFD27V-TREigene Footprints:SOT23_PESD2_NEXCR1
1PTCAN3413DRBREigene Footprints:VSON8-DRB_TEXU8
1PTS636SM25JSMTR_LFSEigene Footprints:PTS636SM25JSMTRLFSS1
1SF-2410F1500T-2Eigene Footprints:SF2410F1500T2F1
1SMAJ33ADiode_SMD:D_SMAD3
1SS14Diode_SMD:D_SMAD4
1STM32G0B1RET6NEigene Footprints:QFP50P1200X1200X160-64NIC2
1SWD_HeaderConnector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ1
1TLV75533PDBVPackage_TO_SOT_SMD:SOT-23-5U2
1TPD2EUSB30Package_TO_SOT_SMD:Texas_DRT-3U3
1TPS2116DRLREigene Footprints:SOTFL50P160X60-8NU4
1TP_3V3_MAINTestPoint:TestPoint_Pad_D1.5mmTP2
1TP_3V3_USBTestPoint:TestPoint_Pad_D1.5mmTP15
1TP_3V3_presentTestPoint:TestPoint_Pad_D1.5mmTP17
1TP_CANHTestPoint:TestPoint_Pad_D1.5mmTP6
1TP_CANLTestPoint:TestPoint_Pad_D1.5mmTP7
1TP_CAN_RXDTestPoint:TestPoint_Pad_D1.5mmTP11
1TP_CAN_TXDTestPoint:TestPoint_Pad_D1.5mmTP12
1TP_DO1_OUTTestPoint:TestPoint_Pad_D1.5mmTP13
1TP_DO5_OUTTestPoint:TestPoint_Pad_D1.5mmTP14
1TP_DO9_OUTTestPoint:TestPoint_Pad_D1.5mmTP16
1TP_DO_G1_FAULT_NTestPoint:TestPoint_Pad_D1.5mmTP9
1TP_DO_G2_FAULT_NTestPoint:TestPoint_Pad_D1.5mmTP10
1TP_DO_G3_FAULT_NTestPoint:TestPoint_Pad_D1.5mmTP8
1TP_GND1TestPoint:TestPoint_Pad_D1.5mmTP18
1TP_GND2TestPoint:TestPoint_Pad_D1.5mmTP19
1TP_GND3TestPoint:TestPoint_Pad_D1.5mmTP20
1TP_NRSTTestPoint:TestPoint_Pad_D1.5mmTP3
1TP_P24V_PROTTestPoint:TestPoint_Pad_D1.5mmTP1
1TP_USB_VBUSTestPoint:TestPoint_Pad_D1.5mmTP4
1TP_VBUS_SENSETestPoint:TestPoint_Pad_D1.5mmTP5
1UJ20-C-H-G-SMT-TREigene Footprints:CUI_UJ20-C-H-G-SMT-TRJ2
1XAL7030-822MECEigene Footprints:XAL7030822MECL1

The 143 most common of 147 parts.

Similar boards

  • 4 layers70 × 45 mmUsb audio interface, the printed circuit board in 3D

    Usb audio interface

    tracelabs-pcb/usb-audio-interface

    USB-C Audio Interface PCB — UAC2, Headset, Mic Preamp — KiCad 4-Layer

    110 parts
  • 4 layers65 × 56 mmCanary pwr, the printed circuit board in 3D

    Canary pwr

    danbrunski/canary

    Four 25 F cells in series for CANary-PWR's LTC3350 hold-up, on a lead (design record: docs/CANary-PWR-Spec.md §P4). The board has no active parts: four cells, an NTC, two Kelvin net ties and a Micro-Fit 2 × 5 header.

    132 parts
  • 4 layers6.4 × 6 mmLed interposer, the printed circuit board in 3D

    Led interposer

    Mouse-GYM/auto-trainer-hardware

    Repository for hardware, firmware, and software related to the Mouse-GYM modules

    3 parts
  • 4 layers50 × 60 mmCanarynode, the printed circuit board in 3D

    Canarynode

    aboller1212/canarynode

    Custom CAN sensor node: STM32G474 + IMU + environmental, USB-C, 4-layer PCB

    65 parts1
  • 4 layers49.5 × 56.8 mmBLE CAN module, the printed circuit board in 3D

    BLE CAN module

    shivamtiwari020505/Automotive-BLE-CAN-Module

    KiCad hardware design for an automotive BLE-to-CAN module

    110 parts
  • 2 layers100 × 75 mmDisplayDriver, the printed circuit board in 3D

    DisplayDriver

    zkeulr/aviator

    39 parts1GPL-3.0
  • 4 layers85 × 100 mmTrailtrack, the printed circuit board in 3D

    Trailtrack

    lead-afk/TrailTrack-pub

    128 parts

Questions

How big is the 24V High Side Driver PCB?

It measures 140 × 80 mm and has 4 copper layers, 1.6 mm thick.

What parts does the 24V High Side Driver use?

147 parts, built around the LM65625SRZTRQ1, TPS274160ARLHR, STM32G0B1RET6N and TLV75533PDBV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the 24V High Side Driver KiCad files?

From the tracelabs-pcb/can-do12 repository on GitHub, at the commit this page was made from: the board is kicad/24V-High-Side-Driver.kicad_pcb and its schematic kicad/24V-High-Side-Driver.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the 24V High Side Driver design in my own project?

Its repository states no licence, so its author keeps all rights: ask tracelabs-pcb before reusing the design.