
Board B
Top-Cat/ZigbeeBlinds
Custom firmware and PCB design to replace the RF board inside Somfy 1003293 motor assemblies with a Zigbee-compatible controller.

Custom firmware and PCB design to replace the RF board inside Somfy 1003293 motor assemblies with a Zigbee-compatible controller.
Board A is an open-source printed circuit board by Top-Cat, from the Top-Cat/ZigbeeBlinds repository on GitHub. It is a 4-layer board of 52 × 13 mm with 22 parts on 15 nets, routed with 66 tracks and 42 vias.
It is built around the TPS629210DRL and AO3401A. Its parts include 5 resistors, 5 connectors, 4 capacitors, 2 ICs and 1 diode.
Custom firmware and PCB design to replace the RF board inside Somfy 1003293 motor assemblies with a Zigbee-compatible controller.

The motor driver works at the supply current of 12V but everything else runs at 3.3V provided by a switching regulator.
Bypassing the regulator the power draw at idle is ~120uA with spikes to 350mA when checking for new commands. Scaling for the standard 12V input and assuming 70% eficiency in the power supply the avarage draw is only ~50uA. With the standard 2600mAh battery this puts the theoretical standby time at 6 years.
The pcb directory contains KiCad sources for the two boards used in this build:
Board_A — Power and motor controlBoard_B — ESP32-C6, USB, sensors, and user controlsBoard images:

main/ — firmware source codepcb/ — KiCad PCB and schematic filespatches/ — patches for esp-idf componentstools/ — helper scripts for OTA patch generation and image creationidf.py on PATH. $IDF_PATH/export.sh
patch -p0 < patches/i2cdev.c
idf.py buildidf.py flashThe project supplies an external converter for use with zigbee2mqtt. With it this device should be essentially plug and play.
To use it copy blinds.mjs to the external_converters/ folder in your z2m installation.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | Conn_01x01_Pin | Connector_PinHeader_2.00mm:PinHeader_1x01_P2.00mm_Vertical | J1, J2, J7 |
| 3 | LOGO | LOGO | G***, G***, G*** |
| 2 | 100uF | Capacitor_Tantalum_SMD:CP_EIA-7343-20_Kemet-V | C4, C5 |
| 2 | 3.3 | Resistor_SMD:R_1206_3216Metric | R6, R7 |
| 1 | 0 | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 2.2uH | Inductor_SMD:L_0805_2012Metric | L1 |
| 1 | 22uF | Capacitor_SMD:C_0805_2012Metric | C3 |
| 1 | 2M | Resistor_SMD:R_0603_1608Metric | R10 |
| 1 | 42.2k | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | A4950E | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm | U3 |
| 1 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical_Gap | J6 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.00mm:PinHeader_1x06_P2.00mm_Vertical | J4 |
| 1 | D | Diode_SMD:D_1206_3216Metric | D2 |
| 1 | TPS629210 | Package_TO_SOT_SMD:SOT-583-8 | U2 |

Top-Cat/ZigbeeBlinds
Custom firmware and PCB design to replace the RF board inside Somfy 1003293 motor assemblies with a Zigbee-compatible controller.




polpo/picogus
Emulation of ISA sound cards and CD-ROM on Raspberry Pi Pico (GUS, SB/Adlib, MPU-401, Tandy, CMS, Panasonic CD-ROM) with USB mouse/joystick support

osy/XG_Mobile_Station
Open source eGPU dock for ROG Ally and ROG Flow

iandchasse/silkscreen-pcb
Silkscreen: open-hardware ESP32-S3 e-paper reader mainboard (KiCad 9). Formerly the de-link hub.

BlueSCSI/BlueSCSI-v2
BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350

pms67/LittleBrain-STM32F4-Sensorboard
STM32F4-based PCB interfacing with a variety of sensors.
It measures 52 × 13 mm and has 4 copper layers, 1 mm thick.
22 parts, built around the TPS629210DRL and AO3401A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Top-Cat/ZigbeeBlinds repository on GitHub, at the commit this page was made from: the board is pcb/Board_A.kicad_pcb and its schematic pcb/Board_A.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Top-Cat before reusing the design.