2 layers142 × 23 mm
Massue bento v4
benkuper/BenTo-Legacy
Legacy repository for the former BenTo-Club project
101 parts1GPL-3.0
2 layers50 × 45 mm
NavigationBoard
ToolboxPlane/NavigationBoard- Size
- 50 × 45 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 44
- Nets
- 31
- Pads
- 370
- Tracks, vias
- 530, 43
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 12 Aug 2018
- Updated
- 3 Aug 2020
Overview
NavigationBoard is an open-source printed circuit board by ToolboxPlane, from the ToolboxPlane/NavigationBoard repository on GitHub. It is a 2-layer board of 50 × 45 mm with 44 parts on 31 nets, routed with 530 tracks and 43 vias.
It is built around the ATMEGA2560-16AU, FT230XQ-R and MPL3115A2R1, with the RFM96W-433S2 among its other parts. Its parts include 13 capacitors, 13 resistors, 6 ICs, 2 diodes and 2 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
4
ATMEGA2560-16AU
TQFP-100(14x14)-40℃~+85℃ 10bit 16MHz 256KB 4.5V~5.5V 4KB 8 Bit 86 8KB AVR Built-in FLASH TQFP-100(14x14) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
FT230XQ-R
QFN-16-EP(4x4)-40℃~+85℃ 125uA 3.3V~5V 8mA USB 2.0 USB to UART QFN-16-EP(4x4) USB Converters ROHSFTDIUSB Converters
MPL3115A2R1
LGA-8(3x5)-40℃~+85℃ 0.05Kpa 0.4Kpa 1.95V~3.6V 1s 2uA 50Kpa~1.1bar I2C LGA-8(3x5) Pressure Sensors ROHSNXP SemiconductorsPressure Sensors
RFM96W-433S2
LCC-16_16X16mmLCC-16_16X16mm New Arrivals ROHSHOPE MICROELECTRONICSUncategorised
README
README.mdNavigationBoard
Parts
44| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 10k | Resistor_SMD:R_0603_1608Metric | R7, R8, R9, R10, R11, R12, R13 |
| 4 | 100nF | Capacitor_SMD:C_0603_1608Metric | C4, C6, C12, C13 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 2 | 27 | Resistor_SMD:R_0603_1608Metric | R3, R4 |
| 2 | 270 | Resistor_SMD:R_0603_1608Metric | R5, R6 |
| 2 | 47p | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | 8pF | Capacitor_SMD:C_0603_1608Metric | C7, C8 |
| 2 | LED_Small | LED_SMD:LED_0603_1608Metric | D1, D2 |
| 1 | 10nF | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 10µF | Capacitor_SMD:C_1210_3225Metric | C9 |
| 1 | 10µF | Capacitor_SMD:C_0603_1608Metric | C11 |
| 1 | 16MHz | Crystal:Crystal_SMD_5032-2Pin_5.0x3.2mm | Y1 |
| 1 | 22µF | Capacitor_SMD:C_1206_3216Metric | C10 |
| 1 | 4.7µF | Capacitor_SMD:C_0603_1608Metric | C5 |
| 1 | 600 Ohms @ 100MHz | Capacitor_SMD:C_0603_1608Metric | FB1 |
| 1 | ATmega2560-16AU | Package_QFP:TQFP-100_14x14mm_P0.5mm | U1 |
| 1 | AVR-ISP-6 | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J6 |
| 1 | Antenna_Shield | Connector_Coaxial:SMA_Molex_73251-1153_EdgeMount_Horizontal | AE1 |
| 1 | FT230XQ | Package_DFN_QFN:QFN-16-1EP_4x4mm_P0.65mm_EP2.1x2.1mm | U3 |
| 1 | LMZM23600V3 | Package_LGA:Texas_SIL0010A_MicroSiP-10-1EP_3.8x3mm_P0.6mm_EP0.7x2.9mm_ThermalVias | U6 |
| 1 | MPL3115A2 | Package_LGA:NXP_LGA-8_3x5mm_P1.25mm_H1.1mm | U4 |
| 1 | RFM96W-433S2 | RF_Module:HOPERF_RFM9XW_SMD | U2 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_PTS810 | SW1 |
| 1 | USB_C_Receptacle_USB2.0 | GT-USB-7010:USB_C_Receptacle_GT-USB-7010 | J5 |
| 1 | ublox_SAM-M8Q | RF_GPS:ublox_SAM-M8Q | U5 |
Questions
How big is the NavigationBoard PCB?
It measures 50 × 45 mm and has 2 copper layers, 1.6 mm thick.
What parts does the NavigationBoard use?
44 parts, built around the ATMEGA2560-16AU, FT230XQ-R, MPL3115A2R1 and RFM96W-433S2. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the NavigationBoard KiCad files?
From the ToolboxPlane/NavigationBoard repository on GitHub, at the commit this page was made from: the board is NavigationBoard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the NavigationBoard design in my own project?
Its repository states no licence, so its author keeps all rights: ask ToolboxPlane before reusing the design.
Similar boards
- 2 layers50 × 60 mm
FlightControllerBoard
ToolboxPlane/FlightControllerBoard
A flight controller board for the mini Talon UAV based on a STM32 Nucleo-32.
88 parts3 - 2 layers50 × 80 mm
- 4 layers120 × 80 mm
- 4 layers60 × 100 mm
- 2 layers56.5 × 65 mm
LoRaAPRS GW RPI V20
aronaut/LoRa-APRS-Gateway-HAT-for-Raspberry-Pi
LoRa APRS Gateway HAT for Raspberry Pi
28 parts4GPL-3.0 - 2 layers51.1 × 95 mm
Talk e
milovanpms/talk-e
📻 — A simple LoRa-based talkie-walkie built on ESP32, operating on the 433 MHz frequency band for long-range, low-power wireless communication.
75 parts4 - 2 layers51.8 × 41.7 mm
PayloadPrototypeBoard
Case-Rocket-Team/PayloadPrototypeBoard2021
Prototype Payload Board for the 2021 ESRA Payload using Parafoil Guidance. KiCad Project
84 parts2