6 layers100 × 100 mm
2 layers
Video streamer
tomverbeure/multi_video_streamer1- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 61
- Nets
- 367
- Pads
- 771
- Tracks, vias
- 1,456, 89
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 17 Feb 2019
- Updated
- 3 Mar 2019
Overview
Video streamer is an open-source printed circuit board by tomverbeure, from the tomverbeure/multi_video_streamer repository on GitHub. It is a 2-layer board with 61 parts on 367 nets, routed with 1,456 tracks and 89 vias.
It is built around the EP2C8Q208C7, KSZ9031RNXCA and AT25SF041-SSHD-T, with the BAS70JW among its other parts. Its parts include 32 resistors, 17 ICs, 8 capacitors, 3 inductors and 1 diode. It belongs with the FPGA and CPLD boards of this library.
Main components
4
EP2C8Q208C7
PQFP-208(28x28)0℃~+85℃ 1.15V~1.25V 138 165888bit 516 8256 Cyclone II Supports hot swap、Supports SEU error detection and correction PQFP-208(28x28) Programmable Logic Device (CPLDs/FPGAs)Intel/AlteraProgrammable Logic Device (CPLDs/FPGAs)
KSZ9031RNXCA
QFN-48-EP(7x7)0℃~+70℃ 1.2V、1.8V、2.5V、3.3V 10BASE-T、100BASE-TX、1000BASE-T 10Mbit/s、100Mbit/s、1Gbit/s 4 PHY Transceiver RGMII QFN-48-EP(7x7) Ethernet Transceivers ROHSMicrochip TechnologyEthernet Transceivers
AT25SF041-SSHD-T
SOIC-8-40℃~+85℃ 100,000 cycles 104MHz 10uA 2.5V~3.6V 20 Years 4Mbit 700us SPI SOIC-8 NOR FLASH ROHSRenesas ElectronicsFLASH
BAS70JW
SC-70-6(SOT-363)Schottky DiodesDiodes Incorporated
README
README.mdMulti-Video Streamer
Nothing to see here yet...
Parts
61| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 10K | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R2, R3, R5, R7, R9, R11, R13, R15, R17, R18, R19, R32 |
| 7 | NS | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R4, R6, R8, R10, R12, R14, R16 |
| 7 | OV7670_module | OV7670_Module:OV7670_Vertical | U6, U8, U10, U12, U16, U18, U20 |
| 6 | 22 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R26, R27, R28, R29, R30, R31 |
| 6 | OV7670_module | OV7670_Module:OV7670_Flat | U7, U9, U11, U15, U17, U19 |
| 4 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C3, C4, C5, C6 |
| 3 | 1K | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R20, R21, R25 |
| 2 | 0 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R22, R23 |
| 2 | 27pF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C7, C8 |
| 2 | 600R | Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L1, L2 |
| 2 | C | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1, C2 |
| 1 | 12.1K 1% | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R24 |
| 1 | AT25SF041-SSHD | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | BAS70J | Diode_SMD:D_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | EP2C8Q208 | Package_QFP:PQFP-208_28x28mm_P0.5mm | U4 |
| 1 | ICE40HX4K-144 | Package_QFP:TQFP-144_20x20mm_P0.5mm | U1 |
| 1 | KSZ9031RNXCA | Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm | U3 |
| 1 | L | Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | L3 |
Similar boards
- 2 layers148.1 × 134.1 mm
SparkFun Qwiic WAV Trigger Pro panelized
sparkfun/SparkFun_Qwiic_WAV_Trigger_Pro
An STM based WAV/MIDI device with a full speed USB interface.
1,313 parts2 - 4 layers160 × 62 mm
- 8 layers90 × 120.4 mm
Artix dc scm
antmicro/artix-dc-scm
Experimental Xilinx Artix-7 driven Data Center Security Communication Module
546 parts72Apache-2.0 - 4 layers117.9 × 99.1 mm
GNSS Firehose
pmonta/GNSS_Firehose
Wideband front-end digitizer for GPS, GLONASS, Galileo, BeiDou
519 parts69 - 6 layers112 × 98 mm
- 12 layers55 × 40 mm
- 12 layers152.9 × 90 mm
Data center rdimm ddr4-tester
antmicro/rdimm-ddr4-tester
Experimental platform built around Xilinx Kintex-7 FPGA for development and customization of RAM controllers supporting RDIMM DDR4 RAM modules used in data centers.
691 parts32Apache-2.0
Questions
What parts does the Video streamer use?
61 parts, built around the EP2C8Q208C7, KSZ9031RNXCA, AT25SF041-SSHD-T and BAS70JW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Video streamer KiCad files?
From the tomverbeure/multi_video_streamer repository on GitHub, at the commit this page was made from: the board is pcb/video_streamer.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Video streamer design in my own project?
Its repository states no licence, so its author keeps all rights: ask tomverbeure before reusing the design.