Skip to the content
2 layers53.1 × 93.3 mmDronePCB, the printed circuit board in 3D

Git du projet drone de Robotech 2025 / 2026

Size
53.1 × 93.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
15
Nets
45
Pads
91
Tracks, vias
117, 33
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
12 Oct 2025
Updated
28 Sep 2026

Overview

DronePCB is an open-source printed circuit board by Tomnwol, from the Tomnwol/drone-robotech repository on GitHub. It is a 2-layer board of 53.1 × 93.3 mm with 15 parts on 45 nets, routed with 117 tracks and 33 vias.

It is built around the SN74AHCT125N. Its parts include 4 resistors, 2 ICs, 2 diodes and 1 connector. It belongs with the robots and motor control boards and the ESP32 boards of this library.

Main components

1

README

README.md

Robotech Drone — 2025/2026

ESP32-based 5" drone built by the Robotech team. Attitude is estimated from a 9-axis IMU, then converted into motor commands through a PID loop. Control and telemetry go over the ESP32's built-in Wi-Fi (UDP).

Drone hardware

Approach

A 9-axis IMU (accelerometer, gyroscope, magnetometer) feeds a Madgwick AHRS filter to estimate attitude. Angular commands from that estimate drive the motors via DShot.

Components

PartModel
MCUESP32 DevKit
Accel / GyroMPU-9265
MagnetometerGY-271 (not-used)
MotorsXING-E Pro 2207 1800KV 2–6S (iFlight)
ESCHobbywing XRotor Micro 65A G2 4-in-1 AM32
BatteryLiPo GNB 6S 2200 mAh 120C — XT60 (Gaoneng)
LinkESP32 Wi-Fi (UDP)
FrameDesigned in Fusion 360, 3D-printed
PCBDesigned in KiCad 9

Firmware

After library issues with DShot under ESP-IDF / PlatformIO, the flight code moved to Arduino IDE to use a more recent DSHOTRMT build. Firmware lives under main/.

Ground station (Qt)

A Qt 6 ground station in Emitter/QT_Controller/ connects over Wi-Fi and sends stick / config commands by UDP.

From a clean Linux machine (apt / dnf / yum):

bash
git clone <repo-url>
cd drone-robotech/Emitter/QT_Controller

./install-deps.sh   # cmake, g++, Qt6, QML modules, libevdev, …

cmake -S . -B build -DCMAKE_BUILD_TYPE=Release
cmake --build build -j"$(nproc)"
./build/drone_controller

Use CMake + Qt6 only — do not use qmake / Qt5 (qmake on Ubuntu often points to Qt5).

PID / motor offsets are saved under ~/.config/drone_controller/initialValues.ini.

An Xbox-style gamepad named Generic X-Box pad is optional; without it the UI still starts (sticks can be moved with the on-screen sliders).

Simulation

Simulation/simulation.py visualizes attitude estimation and the four motor responses so PID gains can be tuned offline.

Media

Parts

15
QtyValueFootprintReferences
4MountingHoleMountingHole:MountingHole_3.2mm_M3_PadH1, H2, H3, H4
2500Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR1, R2
2LEDLED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolderD1, D2
1100000Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR3
115000Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR4
1Conn_01x05_PinConnector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_VerticalGY-271
1Conn_01x10_PinConnector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_VerticalMPU9265
1ESC SIGNALSConnector_JST:JST_SHL_SM10B-SHLS-TF_1x10-1MP_P1.00mm_HorizontalJ1
1ESP32-DEVKIT-V1Empreinte:MODULE_ESP32_DEVKIT_V1U1
1SN74AHCT125NSN74AHCT125N_FP:DIP794W45P254L1930H508Q14U2

More from Tomnwol/drone-robotech

1
  • 2 layers164.2 × 95 mmManette drone Robotech, the printed circuit board in 3D

    Manette drone Robotech

    Tomnwol/drone-robotech

    Git du projet drone de Robotech 2025 / 2026

    22 parts1

Similar boards

  • 2 layers49.4 × 35.8 mmWS2812Controller, the printed circuit board in 3D

    WS2812Controller

    klein0r/pcb-ws2812-wifi-controller

    WiFi Controller for WS2812 LED Stripes

    22 parts82MIT
  • 2 layers40 × 108 mmSol, the printed circuit board in 3D

    Sol

    wntrblm/Sol

    An open-source MIDI-to-CV Eurorack module that runs CircuitPython

    59 parts76
  • 2 layers26.9 × 73.9 mmWS2812ControllerEthernet, the printed circuit board in 3D

    WS2812ControllerEthernet

    klein0r/pcb-ws2812-ethernet-controller

    Ethernet Controller for WS2812 LED Stripes

    12 parts38MIT
  • 2 layers49.5 × 35.6 mmWLED Controller, the printed circuit board in 3D

    WLED Controller

    f2daz/WLED_PCB_D1_Mini

    PCB for WLED with WeMos D1 Mini and SN74AHCT125N level shifter

    12 parts34MIT
  • 2 layers65 × 70 mmOpenradfan, the printed circuit board in 3D

    Openradfan

    andrekuehne/openradfan

    An ESPHome-driven controller for radiator fans to improve heat output

    49 parts29MIT
  • 2 layersFoxie clock nano, the printed circuit board in 3D

    Foxie clock nano

    afoxinsocks/foxie-clock

    A Nixie-like, retro, RGB LED, Arduino-powered clock

    133 parts24GPL-3.0
  • 2 layers120 × 90 mmMy babys got led, the printed circuit board in 3D

    My babys got led

    mcqn/my-babys-got-led

    Simple ESP8266 board to drive WS2812 LED strips

    51 parts18
  • 2 layers276.9 × 142.2 mmBeat707, the printed circuit board in 3D

    Beat707

    FrankBuss/beat707

    A MIDI sequencer

    276 parts11

Questions

How big is the DronePCB PCB?

It measures 53.1 × 93.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the DronePCB use?

15 parts, built around the SN74AHCT125N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the DronePCB KiCad files?

From the Tomnwol/drone-robotech repository on GitHub, at the commit this page was made from: the board is Hardware/FlightController/DronePCB.kicad_pcb and its schematic Hardware/FlightController/DronePCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the DronePCB design in my own project?

Its repository states no licence, so its author keeps all rights: ask Tomnwol before reusing the design.