Skip to the content
2 layers43.1 × 43.5 mmLed ctrl-24v, the printed circuit board in 3D
Size
43.1 × 43.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
36
Nets
29
Pads
123
Tracks, vias
208, 30
Pours
3
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
25 Jul 2020
Updated
26 Sep 2026

Overview

Led ctrl-24v is an open-source printed circuit board by TomKeddie, from the TomKeddie/prj-pcb-experiments repository on GitHub, published under the BSD-2-Clause licence. It is a 2-layer board of 43.1 × 43.5 mm with 36 parts on 29 nets, routed with 208 tracks and 30 vias.

It is built around the 74LVC1G125, TPS5430DDA and XC6206P332MR-G, with the AO3400A and B340 among its other parts. Its parts include 15 resistors, 6 capacitors, 5 switches, 4 ICs and 3 connectors. It belongs with the ESP8266 boards of this library.

Main components

5

README

README.md

tom-pcb-experiments

Parts

36
QtyValueFootprintReferences
810klibrary:R_0603_1608MetricR1, R2, R3, R4, R5, R6, R12, R14
5SW_Push_Duallibrary:SW_Push_1P1T_NO_CK_KSC6xxJSW1, SW2, SW3, SW4, SW5
30library:R_0603_1608MetricR8, R9, R10
210klibrary:R_0402_1005MetricR11, R15
210uF/10V/X5Rlibrary:C_0603_1608MetricC6, C7
1100klibrary:R_0603_1608MetricR7
1100nF/50V/X7Rlibrary:C_0603_1608MetricC2
110nF/50V/X7Rlibrary:C_0402_1005MetricC3
110uF/50V/X5Rlibrary:C_1206_3216MetricC4
1220uF/6.3V/TANTlibrary:CP_EIA-3528-12_Kemet-TC5
133uH/1Alibrary:CYA630L1
14.7klibrary:R_0402_1005MetricR13
174LVC1G125library:SOT-23-5U4
1AO3400Alibrary:SOT-23Q1
1B340library:D_SMAD1
1Conn_01x02library:connector_1x02_padsJ2
1Conn_01x04library:PinHeader_1x04_P2.54mm_VerticalJ1
1Conn_01x05library:connector_1x05_padsJ3
1ESP-12library:ESP-12E_SMDU2
1TPS5430DDAlibrary:TI_SO-PowerPAD-8_ThermalViasU1
1XC6206P332MR-Glibrary:SOT-23U3

More from TomKeddie/prj-pcb-experiments

12
  • 2 layers226.2 × 73.4 mm2024-clock retrofit, the printed circuit board in 3D

    2024-clock retrofit

    TomKeddie/prj-pcb-experiments

    96 parts4BSD-2-Clause
  • 2 layers100 × 100 mmMicromod carrier, the printed circuit board in 3D

    Micromod carrier

    TomKeddie/prj-pcb-experiments

    91 parts4BSD-2-Clause
  • 4 layers88.9 × 88.9 mmCh348 octo serial, the printed circuit board in 3D

    Ch348 octo serial

    TomKeddie/prj-pcb-experiments

    75 parts4BSD-2-Clause
  • 2 layers83.2 × 57.8 mmFt4232h breakout, the printed circuit board in 3D

    Ft4232h breakout

    TomKeddie/prj-pcb-experiments

    73 parts4BSD-2-Clause
  • 2 layers14.5 × 11.4 mmHc245t bypass, the printed circuit board in 3D

    Hc245t bypass

    TomKeddie/prj-pcb-experiments

    64 parts4BSD-2-Clause
  • 2 layers92 × 92 mmMulti way usb, the printed circuit board in 3D

    Multi way usb

    TomKeddie/prj-pcb-experiments

    64 parts4BSD-2-Clause
  • 2 layers49 × 9 mmStrange parts sao, the printed circuit board in 3D

    Strange parts sao

    TomKeddie/prj-pcb-experiments

    62 parts4BSD-2-Clause
  • 2 layers99.9 × 80.9 mmKindcalmsafe, the printed circuit board in 3D

    Kindcalmsafe

    TomKeddie/prj-pcb-experiments

    50 parts4BSD-2-Clause

Similar boards

  • 2 layers94.6 × 72.5 mmSmart room V2, the printed circuit board in 3D

    Smart room V2

    MohamadAminGhanoum/Smart-room-V2

    I have since around 1 year done a smart room, where i made a custom pcb, and salvaged some parts from an old laptop motherboard to be able to control the LED strip that i have and also open and close my curtain, but…

    64 parts
  • 2 layers65 × 30 mmPi zero serial hat, the printed circuit board in 3D

    Pi zero serial hat

    aqualinkd/aqualinkd-zero-hat

    Raspberry HAT to provide RS485 I/O and Power from Jandy RS485 control panel.

    45 parts6
  • 4 layers93.5 × 81 mmUM Controller, the printed circuit board in 3D

    UM Controller

    Aptustech/Micromanipulator_uM_NG

    Next generation Micromanipulator controller

    173 parts2
  • 2 layers68 × 54 mmController, the printed circuit board in 3D

    Controller

    byrantech/stepcraft-3-d600-controller

    Open-source FluidNC Controller for the Stepcraft-3/D.600 system.

    97 parts2MIT
  • 4 layers42.5 × 58.5 mmSTM32 GPS Tracking Module, the printed circuit board in 3D

    STM32 GPS Tracking Module

    tejashviraj19/PCB-Design-Lab

    PCB Design projects, KiCad layouts, embedded hardware experiments, and fabrication-ready PCB designs.

    61 parts1
  • 2 layers79.6 × 83.7 mmCar, the printed circuit board in 3D

    Car

    0529003/2023EC8T6

    2024电赛训练题2023E

    97 parts
  • 2 layers117.8 × 65.3 mmPdb aethrone, the printed circuit board in 3D

    Pdb aethrone

    anurag-2307/Drone_PDB

    Drone Power Distribtion Board

    36 parts
  • 4 layers57 × 47.8 mmTPS Calibration Board, the printed circuit board in 3D

    TPS Calibration Board

    Captainjamason/TPS_Calibration_Board

    WIP... Copyright JPD/Davis Tuning, 2025.

    44 parts

Questions

How big is the Led ctrl-24v PCB?

It measures 43.1 × 43.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Led ctrl-24v use?

36 parts, built around the 74LVC1G125, TPS5430DDA, XC6206P332MR-G and AO3400A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Led ctrl-24v KiCad files?

From the TomKeddie/prj-pcb-experiments repository on GitHub, at the commit this page was made from: the board is 2024-led-ctrl-24v/kicad/led-ctrl-24v.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Led ctrl-24v design in my own project?

Its repository publishes it under the BSD-2-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).