

UM Controller
Next generation Micromanipulator controller
- Size
- 93.5 × 81 mm
- Copper layers
- 4
- Thickness
- 1.65 mm
- Parts
- 173
- Nets
- 163
- Pads
- 755
- Tracks, vias
- 3,040, 337
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 20 Sep 2026
- Updated
- 20 Sep 2026
Overview
UM Controller is an open-source printed circuit board by Aptustech, from the Aptustech/Micromanipulator_uM_NG repository on GitHub. It is a 4-layer board of 93.5 × 81 mm with 173 parts on 163 nets, routed with 3,040 tracks and 337 vias.
It is built around the RP2350B, MT3406 and TPS5430DDA, with the W25Q128JVSIQ, 74HC151D and 74LVC138AD among its other parts. Its parts include 66 capacitors, 46 resistors, 18 ICs, 13 connectors and 10 diodes. It belongs with the RP2350 boards of this library.
Main components
12RP2350B
QFN-80-EP(10x10)48 Power-on reset (POR)、Watchdog reset、External pin reset (NRST)、Built-in general-purpose timer、Integrated LDO、True random number generator (TRNG)、Hardware ECC check、Independent watchdog (IWDG) QFN-80-EP(10x10) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)MT3406
SOT-23-5-40℃~+85℃@(TA) 1 1.5MHz 10uA 1A 2V~6V 600mV~6V Adjustable Buck Buck Built-in Yes SOT-23-5 DC-DC Converters ROHSXI'AN Aerosemi TechDC-DC ConvertersTPS5430DDA
ESOP-8-40℃~+125℃@(TJ) 1 1.221V~32.04V 3A 4.4mA 5.5V~36V 500kHz Adjustable Buck Buck Built-in No ESOP-8 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersW25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASH74HC151D
SOIC-16-40℃~+125℃ 15ns@5V,15pF 2V~6V 40uA 5.2mA 5.2mA 74HC 8/1 Multiplexer Single Supply SOIC-16 Signal Switches, Multiplexers, Decoders ROHSToshibaSignal Switches / Encoders & Decoders / Multiplexers74LVC138AD
-- Signal Switches, Multiplexers, Decoders ROHSNexperiaSignal Switches, Multiplexers, DecodersAAT4610BIGV-1-T1
SOT-23-5SOT-23-5 Power Distribution Switches ROHSSkyworks SolutionsPower Distribution SwitchesK2-1808SN-A4SW-01
SMD,4.2x3.3mm-25℃~+85℃ 100,000 cycles 12V 2.5N 2.5mm 3.25mm 4.2mm 50mA Oval Button SPST Surface Mount,Vertical SMD,4.2x3.3mm Tactile Switches ROHSHRO ElectronicsTactile SwitchesRCLAMP0521P.TCT-MS
04020.25pF 100W@8/20us 100nA 25V 4A 5V 6V Bidirectional IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 TVS 0402 ESD and Surge Protection (TVS/ESD) ROHSMSKSEMIESD And Surge Protection (TVS/ESD)SS14
SMA(DO-214AC)-55℃~+150℃ 1A 25A 300uA@40V 40V 550mV@1A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky DiodesB340
SMC(DO-214AB)-55℃~+150℃ 1 Independent 100A 3A 40V 500mV@3A 500uA@40V SMC(DO-214AB) Schottky Diodes ROHSDiodes IncorporatedSchottky DiodesBAV99
SOT-231 Pair Series Connection 1.25V@150mA 100V 215mA 250mW 4A 4ns 500nA@80V SOT-23 Switching Diodes ROHSNexperiaSwitching Diodes
README
README.mdMicromanipulator_uM_NG
⚠️ Disclaimer: This is a preliminary hardware design and is currently untested. Use or produce these designs at your own risk.
Micromanipulator_uM_NG is a next-generation controller system designed for precision micromanipulation. It improves upon previous designs by introducing higher processing power, expanded I/O capabilities, reliable high-speed sensor communication, and comprehensive power monitoring.
Acknowledgments & Prior Work
This project is the next-generation iteration of the original electronic system for MicroManipulatorStepper by @0x23.
Interactive KiCAD Design Viewers
You can inspect the schematics and PCB layouts directly in your browser without opening KiCAD, powered by KiCanvas:
Key Features & Highlights
- Powered by RP2350B: Upgraded to the RP2350B microcontroller to leverage its high IO count and advanced processing capabilities.
- High-Speed LVDS Link: Uses Low-Voltage Differential Signaling (LVDS) lines between the main controller and sensor boards, enabling a high-speed, noise-resilient SPI bus operating at 15 MHz.
- Power & Diagnostics:
- Input Voltage Monitoring: Real-time tracking of the main supply voltage.
- Per-Motor Current Sensing: Dedicated current monitoring for each individual motor driver channel.
- Modular Expansion: Includes an dedicated extension connector for easily adding custom interfaces, daughterboards, or peripheral modules.
Hardware Repository Structure
├── MT6835/
│ └── V1.0/ # MT6835 encoder/sensor board design files
└── uM_Controller/
└── V1.0/ # Main RP2350B controller board design filesParts
173| Qty | Value | Footprint | References |
|---|---|---|---|
| 30 | 100nF | Capacitor_SMD:C_0402_1005Metric | C16, C17, C18, C19, C20, C21, C22, C23, C24, C25, C27, C32, C33, C34, C35, C36 +14 |
| 15 | 10kΩ | Resistor_SMD:R_0402_1005Metric | R10, R12, R13, R16, R17, R18, R24, R25, R34, R38, R40, R41, R43, R44, R46 |
| 10 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C11, C12, C13, C14, C15, C60, C61, C70, C72, C73 |
| 9 | 10uF | Capacitor_SMD:C_1206_3216Metric | C45, C46, C49, C51, C54, C56, C58, C68, C69 |
| 8 | 15pF | Capacitor_SMD:C_0402_1005Metric | C28, C29, C39, C47, C52, C57, C62, C71 |
| 8 | 3mm | MountingHole:MountingHole_3.2mm_M3_ISO14580_Pad_TopBottom | H1, H2, H3, H4, H5, H6, H7, H8 |
| 6 | 100Ω | Resistor_SMD:R_0402_1005Metric | R11, R14, R15, R39, R42, R45 |
| 4 | 10nF | Capacitor_SMD:C_0603_1608Metric | C64, C65, C66, C67 |
| 4 | 33Ω | Resistor_SMD:R_0402_1005Metric | R6, R7, R8, R9 |
| 3 | 0.05Ω | Resistor_SMD:R_0805_2012Metric | R20, R21, R22 |
| 3 | 100kΩ | Resistor_SMD:R_0603_1608Metric | R27, R28, R33 |
| 3 | 30Ω@100MHz | Inductor_SMD:L_0805_2012Metric | FB1, FB2, FB3 |
| 3 | Conn_01x14_MountingPin | Connector_FFC-FPC:Amphenol_F32R-1A7x1-11014_1x14-1MP_P0.5mm_Horizontal | J3, J4, J5 |
| 3 | INA180A1 | Package_TO_SOT_SMD:SOT-23-5 | U9, U11, U13 |
| 3 | PH_B4B | Connector_JST:JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | J6, J7, J8 |
| 3 | TB6612FNG | Package_SO:SSOP-24_5.3x8.2mm_P0.65mm | U8, U10, U12 |
| 2 | 12kΩ | Resistor_SMD:R_0402_1005Metric | R26, R36 |
| 2 | 13V | Diode_SMD:D_SOD-123 | D4, D5 |
| 2 | 1kΩ | Resistor_SMD:R_0402_1005Metric | R5, R23 |
| 2 | 2.2uH | Inductor_SMD:L_1008_2520Metric | L2, L4 |
| 2 | 330kΩ | Resistor_SMD:R_0603_1608Metric | R29, R32 |
| 2 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C30, C31 |
| 2 | 470Ω | Resistor_SMD:R_0402_1005Metric | R47, R48 |
| 2 | 5.1kΩ | Resistor_SMD:R_0402_1005Metric | R1, R4 |
| 2 | DSLVDS1047PWR | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U3, U4 |
| 2 | K2-1808SN-A4SW-01 | Button_Switch_SMD:SW_Push_1P1T_XKB_TS-1187A | SW1, SW2 |
| 2 | LED | LED_SMD:LED_0805_2012Metric | D9, D10 |
| 2 | MT3406 | Package_TO_SOT_SMD:SOT-23-5 | U14, U16 |
| 2 | RCLAMP0521P.TCT-MS | Diode_SMD:D_0402_1005Metric | D2, D3 |
| 2 | SS14 | Diode_SMD:D_SMA | D1, D8 |
| 1 | 1000uF | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm_P7.50mm | C1 |
| 1 | 10kΩ | Resistor_SMD:R_0603_1608Metric | R31 |
| 1 | 10Ω | Resistor_SMD:R_0603_1608Metric | R30 |
| 1 | 15uH | Inductor_SMD:L_Taiyo-Yuden_NR-60xx | L3 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric | C63 |
| 1 | 20P10 | Package_TO_SOT_SMD:TO-252-2 | Q2 |
| 1 | 220uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C2 |
| 1 | 3.3kΩ | Resistor_SMD:R_0402_1005Metric | R35 |
| 1 | 47kΩ | Resistor_SMD:R_0402_1005Metric | R19 |
| 1 | 51kΩ | Resistor_SMD:R_0402_1005Metric | R37 |
| 1 | 74HC151 | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U18 |
| 1 | 74LVC138 | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U6 |
| 1 | AAT4610BIGV-1-T1 | Package_TO_SOT_SMD:SOT-23-5 | U7 |
| 1 | B340 | Diode_SMD:D_SMC | D7 |
| 1 | BAV99 | Package_TO_SOT_SMD:SOT-23 | D6 |
| 1 | BM03B-SRSS-TB | Connector_JST:JST_SH_BM03B-SRSS-TB_1x03-1MP_P1.00mm_Vertical | J1 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J9 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J13 |
| 1 | Conn_02x22_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x22_P2.54mm_Vertical | J10 |
| 1 | DS90LV011AHMF/NOPB | Package_TO_SOT_SMD:SOT-23-5 | U5 |
| 1 | DSLVDS1048PWR | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U17 |
| 1 | MMBT5401 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | RP2350B | Package_DFN_QFN:QFN-80-1EP_10x10mm_P0.4mm_EP3.4x3.4mm | U1 |
| 1 | TPS5430DDA | Package_SO:TI_SO-PowerPAD-8_ThermalVias | U15 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J12 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.3x5.3mm_P1.27mm | U2 |
| 1 | XT30PW-M | Connector_AMASS:AMASS_XT30PW-M_1x02_P2.50mm_Horizontal | J11 |
| 1 | ~ | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | X1 |
| 1 | ~ | Inductor_SMD:L_Changjiang_FTC201610D | L1 |
More from Aptustech/Micromanipulator_uM_NG
1- 4 layers17 × 23 mm

Similar boards
- 4 layers82.8 × 62.8 mm

Tfr911h
strickyak/tfr9
The TFR/9 Single Board Computer for Hitachi 6309E or Motorola 6809E CPUs (TFR/901)
116 parts12MIT - 4 layers97.6 × 96 mm

Centipede-32e
strickyak/copico-centipede
A Radio Shack / Tandy Color Computer ("Coco") wildcard peripheral cartridge, with an RP2350 processor and 46 usable GPIO lines, covering most of the Coco's expansion port bus.
135 parts7MIT - 4 layers56.8 × 21 mm

Rp2350b pico
Charading/rp2350b-pico
I wanted a board similar to the rp2040 pico so i just designed my own, it's extended by two more pins, in order to break out a ton of gpio and also all 8 ADC pins
59 parts - 4 layers115 × 82.3 mm

MainPCB
HelloAlex4/Maturitaetsarbeit-Design-and-Development-of-a-Portable-Stereoscopic-Wigglegram-Camera
Documentation of the merged wigglegram camera
288 parts12 - 2 layers16.3 × 10.4 mm

Protection board
Breezedude/breezedudeWindSensor-pcb
PCB of Breezedude Wind Sensor Transmitter
10 parts1 - 4 layers27.9 × 63.5 mm

Pico2-ice
tinyvision-ai-inc/pico2-ice
Doc | Hardware | SDK | Schematic | Assembly | Discord
124 parts60MIT - 4 layers21 × 35.1 mm

- 2 layers65 × 30 mm

Pi zero serial hat
aqualinkd/aqualinkd-zero-hat
Raspberry HAT to provide RS485 I/O and Power from Jandy RS485 control panel.
45 parts6
Questions
How big is the UM Controller PCB?
It measures 93.5 × 81 mm and has 4 copper layers, 1.65 mm thick.
What parts does the UM Controller use?
173 parts, built around the RP2350B, MT3406, TPS5430DDA and W25Q128JVSIQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the UM Controller KiCad files?
From the Aptustech/Micromanipulator_uM_NG repository on GitHub, at the commit this page was made from: the board is uM_Controller/V1.0/uM_Controller/uM_Controller.kicad_pcb and its schematic MT6835/V1.0/MT6835/MT6835.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the UM Controller design in my own project?
Its repository states no licence, so its author keeps all rights: ask Aptustech before reusing the design.