
PhobGCC
Tokage2000/Phobri
Repository for a modification of the Phob motherboard to fit an Hori Pad GCC

Repository for a modification of the Phob motherboard to fit an Hori Pad GCC
Post hole is an open-source printed circuit board by Tokage2000, from the Tokage2000/Phobri repository on GitHub. It is a 2-layer board of 33.5 × 33 mm with 26 parts on 6 nets, routed with 58 tracks and 8 vias.
Its parts include 6 resistors, 4 switches, 3 capacitors and 1 connector.
Repository for a modification of the Phob motherboard to fit an Hori Pad GCC
Potential issues:
LR pads are a bit too small, you may need to glue them/stick them in place if you plan to use them.
You have to cut the inner top of the shell and the start button.
Cstick may be awkward to connect.
Phob repositories: https://github.com/PhobGCC
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 5.6k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R6, R7, R8 |
| 4 | MountingHole | MountingHole:MountingHole_2.1mm | H1, H2, H3, H4 |
| 3 | 100n | PhobGCC_2_0_0_footprints:C_0402_1005Metric | C1, C2, C3 |
| 2 | 1.1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
| 2 | 2.2mm | PhobGCC_Footprints:MountingHole_2.2mm | H8, H8 |
| 1 | 2.4mm | PhobGCC_Footprints:MountingHole_2.4mm | H7 |
| 1 | C_down | easyeda2kicad:SW-TH_L6.2-W6.2-P5.00 | SW3 |
| 1 | C_left | easyeda2kicad:SW-TH_L6.2-W6.2-P5.00 | SW1 |
| 1 | C_right | easyeda2kicad:SW-TH_L6.2-W6.2-P5.00 | SW4 |
| 1 | C_up | easyeda2kicad:SW-TH_L6.2-W6.2-P5.00 | SW2 |
| 1 | Conn_01x04 | Connector_PinHeader_2.00mm:PinHeader_1x04_P2.00mm_Vertical | J1 |
| 1 | LOGO | logo:logo_no_text_tiny | G*** |
| 1 | LOGO | logo:text_only_horizontal_4mm_tall | G*** |
| 1 | MountingHole | PhobGCC_2_0_0_footprints:MountingHole_2.0mm | H12 |
| 1 | MountingHole | MountingHole:MountingHole_2.5mm | H5 |
| 1 | MountingHole | PhobGCC_Footprints:MountingHole_2.0mm | H12 |

Tokage2000/Phobri
Repository for a modification of the Phob motherboard to fit an Hori Pad GCC


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!



harbaum/galagino
A Galaga, Pac-Man and Donkey Kong arcade emulator for the ESP32

Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

google/walt
A device for measuring latency of physical sensors and outputs on phones and computers

It measures 33.5 × 33 mm and has 2 copper layers, 1.6 mm thick.
26 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Tokage2000/Phobri repository on GitHub, at the commit this page was made from: the board is Phori cpad/HORI_PHOB1.X/post-hole.kicad_pcb and its schematic KiCad/PhobGCC.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Tokage2000 before reusing the design.