
Post hole
Tokage2000/Phobri
Repository for a modification of the Phob motherboard to fit an Hori Pad GCC

Repository for a modification of the Phob motherboard to fit an Hori Pad GCC
PhobGCC is an open-source printed circuit board by Tokage2000, from the Tokage2000/Phobri repository on GitHub. It is a 2-layer board of 125 × 79.4 mm with 75 parts on 44 nets, routed with 333 tracks and 25 vias.
Its parts include 13 capacitors, 13 switches, 9 resistors, 9 connectors and 3 ICs. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
Repository for a modification of the Phob motherboard to fit an Hori Pad GCC
Potential issues:
LR pads are a bit too small, you may need to glue them/stick them in place if you plan to use them.
You have to cut the inner top of the shell and the start button.
Cstick may be awkward to connect.
Phob repositories: https://github.com/PhobGCC
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 2.2mm | PhobGCC_Footprints:MountingHole_2.2mm | H8, H8, H8, H8, H8, H8, H8, H8, H8 |
| 6 | 0.047u | PhobGCC_Footprints:C_0603_HandSoldering | C1, C2, C3, C4, C5, C7 |
| 6 | 1u | PhobGCC_Footprints:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C8, C9, C10, C11, C12, C13 |
| 4 | 2k | PhobGCC_Footprints:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R4 |
| 3 | 10k | PhobGCC_Footprints:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R13, R14, R15 |
| 2 | 100R | PhobGCC_Footprints:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R11, R12 |
| 2 | 2.4mm | PhobGCC_Footprints:MountingHole_2.4mm | H7, H7 |
| 2 | L | PhobGCC_Footprints:Pin_Header_Straight_1x02_Pitch2.54mm | J6, SW6 |
| 2 | M7C | PhobGCC_Footprints:D_SOD-123 | D2, D3 |
| 2 | MountingHole | PhobGCC_Footprints:MountingHole_1.8mm | H10, H10 |
| 2 | MountingHole | PhobGCC_Footprints:MountingHole_2.0mm | H12, H13 |
| 2 | MouseBite | PhobGCC_Footprints:breakaway-mousebites-double | H14, H15 |
| 2 | Q_NMOS_GSD | PhobGCC_Footprints:SOT-23 | Q1, Q3 |
| 2 | R | PhobGCC_Footprints:Pin_Header_Straight_1x02_Pitch2.54mm | J7, SW7 |
| 2 | R_POT_MountingPin | PhobGCC_Footprints:GCC_Slider | RV1, RV2 |
| 2 | Z | PhobGCC_Footprints:Z_Switch_Edge_Omron | SW8, SW8 |
| 1 | 10u | PhobGCC_Footprints:C_0603_HandSoldering | C6 |
| 1 | 2x DRV5053CAQLPGM Hall Effect Sensors | PhobGCC_Footprints:GCC_Stickbox_2 | U2 |
| 1 | A | PhobGCC_Footprints:ABXY_Contact_Omron_Switch | SW1 |
| 1 | B | PhobGCC_Footprints:ABXY_Contact_Omron_Switch | SW2 |
| 1 | Conn_01x01_Male | PhobGCC_Footprints:PinHeader_1x01_P2.54mm_Vertical | J3 |
| 1 | Conn_01x04_Female | PhobGCC_Footprints:PinHeader_1x04_P2.00mm_Vertical | J2 |
| 1 | Conn_01x04_Male | PhobGCC_Footprints:PinHeader_1x04_P2.00mm_Vertical | J4 |
| 1 | Conn_01x06_Female | PhobGCC_Footprints:GCC_Header_Straight_1x06_Pitch2.00mm | J1 |
| 1 | D_Schottky_Shorted | PhobGCC_Footprints:D_SOD-523_Shorted | D1 |
| 1 | Ddown | PhobGCC_Footprints:Dpad_Contact_TL3315NF_2 | SW12 |
| 1 | Dleft | PhobGCC_Footprints:Dpad_Contact_TL3315NF_2 | SW9 |
| 1 | Dright | PhobGCC_Footprints:Dpad_Contact_TL3315NF_2 | SW11 |
| 1 | Dup | PhobGCC_Footprints:Dpad_Contact_TL3315NF_2 | SW10 |
| 1 | Fuse | PhobGCC_Footprints:Fuse_1206_3216Metric | F1 |
| 1 | L | PhobGCC_Footprints:Trigger_Contact | SW13 |
| 1 | MouseBiteLA | PhobGCC_Footprints:breakaway-mousebites-double | H16 |
| 1 | MouseBiteRA | PhobGCC_Footprints:breakaway-mousebites-double | H17 |
| 1 | Q_PMOS_GDS | PhobGCC_Footprints:SOT-23 | Q2 |
| 1 | R | PhobGCC_Footprints:Trigger_Contact | SW14 |
| 1 | Rumble | PhobGCC_Footprints:rumble_pins | J5 |
| 1 | Start | PhobGCC_Footprints:Start_Contact | SW5 |
| 1 | Stickbox_Assembly | PhobGCC_Footprints:GCC_Stickbox_Hall_Only | U5 |
| 1 | Teensy4.0 | PhobGCC_Footprints:Teensy40_Edge_Pins | U1 |
| 1 | X | PhobGCC_Footprints:ABXY_Contact_Omron_Switch | SW3 |
| 1 | Y | PhobGCC_Footprints:ABXY_Contact_Omron_Switch | SW4 |

Tokage2000/Phobri
Repository for a modification of the Phob motherboard to fit an Hori Pad GCC

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


JGAguado/Smart_Plant
The Smart Plant is a board that can be plugged directly on the soil, close to the plant, that allows the measurement of the environment (soil moisture, environment temperature & illuminance), and presents the…


StoneRose35/cortexguitarfx
guitar effects processor implemented on various arm cortex platforms


cnlohr/cnhardware
My dumping grounds for all my kicad projects and random hardware bringup.

thebiguno/microcontroller-projects
A home for a bunch of microcontroller projects which don't warrant their own repos.
It measures 125 × 79.4 mm and has 2 copper layers, 1.6 mm thick.
75 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Tokage2000/Phobri repository on GitHub, at the commit this page was made from: the board is KiCad/PhobGCC.kicad_pcb and its schematic KiCad/PhobGCC.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Tokage2000 before reusing the design.