2 layers33.3 × 38 mm
ESP32-C3-WROOM02 dev board
pushtiujeniya/ESP32-C3-WROOM02_dev-board
This project is a custom 2-layer development board designed around the ESP32-C3-WROOM-02 Wi‑Fi + Bluetooth MCU module.
30 parts2
4 layers30.9 × 37.6 mm
ESP32 C3 Mini
tnush2106/esp32_c3_mini_devkitESP32 Mini DevKit hardware design in KiCad
- Size
- 30.9 × 37.6 mm
- Copper layers
- 4
- Thickness
- 1 mm
- Parts
- 29
- Nets
- 29
- Pads
- 143
- Tracks, vias
- 164, 32
- Pours
- 11
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 9 Sep 2026
- Updated
- 9 Sep 2026
Overview
ESP32 C3 Mini is an open-source printed circuit board by tnush2106, from the tnush2106/esp32_c3_mini_devkit repository on GitHub. It is a 4-layer board of 30.9 × 37.6 mm with 29 parts on 29 nets, routed with 164 tracks and 32 vias.
It is built around the ESP32-C3-WROOM-02-H4, AP2112K-3.3 and USBLC6-2SC6, with the PESD5V0L1ULD among its other parts. Its parts include 10 capacitors, 9 resistors, 3 ICs, 3 connectors and 2 switches. It belongs with the ESP32 and RISC-V boards of this library.
Main components
4
ESP32-C3-WROOM-02-H4
SMD,20x18mm-105dBm -40℃~+105℃ 2.4GHz 20.5dBm 345mA 3V~3.6V 82mA Bluetooth5.0 ESP32-C3 On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,20x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
AP2112K-3.3
SOT253.3V 600mA CMOS Low Dropout Linear Regulator with EnableDiodes IncorporatedUncategorised
USBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)
PESD5V0L1ULD
DFN1006-2(SOD-882)-55℃~+150℃ 1 10nA 12V 25pF 3.5A@8/20us 42W 5V 6.4V ESD IEC 61000-4-2、IEC 61000-4-5 Unidirectional DFN1006-2(SOD-882) ESD and Surge Protection (TVS/ESD) ROHSNexperiaESD And Surge Protection (TVS/ESD)
Parts
29| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10k | Resistor_SMD:R_0402_1005Metric | R5, R7, R8, R9 |
| 3 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C6, C9, C10 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric | C3, C4 |
| 2 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | Conn_01x08_Pin | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J2, J3 |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_B3U-1000P | SW1, SW2 |
| 2 | TBD | Capacitor_SMD:C_0201_0603Metric | C7, C8 |
| 1 | 0R | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | 100R | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C5 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | Crystal | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | ESP32-C3-WROOM-02 | RF_Module:ESP32-C3-WROOM-02 | U3 |
| 1 | PESD5V0L1ULD | Diode_SMD:D_SOD-882D | D1 |
| 1 | TBD | Resistor_SMD:R_0201_0603Metric | R4 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U1 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_HCTL_HC-TYPE-C-16P-01A | J1 |
Similar boards
- 4 layers38 × 28.5 mm
Esp32 iot pcb
anasskrim61-wq/esp32-c3-mini
Custom ESP32-C3 Mini IoT hardware design and KiCad PCB project
29 parts1 - 4 layers100.2 × 62.9 mm
NN antenna manager
NozomiNetworks/NN-antenna-manager
Open source project for a custom antenna manager for SDR cards
71 parts1 - 4 layers29.4 × 39.3 mm
ESP32 C3 Mini
Akshath2002/ESP32-Mini-Evaluation-Board
A compact 4-layer ESP32 evaluation board designed in KiCad, focused on reliable power distribution, signal integrity, and ease of prototyping.
29 parts - 2 layers75 × 51.5 mm
Diy stream deck pcb
Benjpp/diy-stream-deck-pcb
PCB for hardware orchestrator from the diy stream deck
44 parts - 4 layers34.4 × 42.5 mm
Third project esp
BhautikSarvaiya/ESP32_C3_MINI
This project focuses on designing a compact custom PCB based on the ESP32-C3 Mini microcontroller using KiCad 10.0.
29 parts - 4 layers28.6 × 37.2 mm
Esp32
d3ckerd/Custom-ESP32
Created a 4 layer custom esp32 dev board using the "ESP32-C3-WROOM-02" module. To learn much about how to create such a module I followed and learned from Pajopcb's youtube tutorials on the esp32.
31 partsMIT - 4 layers29.8 × 35 mm
Custom ESP32 Board
diaseanodarren-hash/Custom-ESP32-C3-mini-Microcontroller
Designed a custom ESP32-C3-mini microcontroller development board from schematic capture and footprint creation to final PCB layout and trace routing.
29 parts
Questions
How big is the ESP32 C3 Mini PCB?
It measures 30.9 × 37.6 mm and has 4 copper layers, 1 mm thick.
What parts does the ESP32 C3 Mini use?
29 parts, built around the ESP32-C3-WROOM-02-H4, AP2112K-3.3, USBLC6-2SC6 and PESD5V0L1ULD. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ESP32 C3 Mini KiCad files?
From the tnush2106/esp32_c3_mini_devkit repository on GitHub, at the commit this page was made from: the board is ESP32_C3_Mini.kicad_pcb and its schematic ESP32_C3_Mini.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ESP32 C3 Mini design in my own project?
Its repository states no licence, so its author keeps all rights: ask tnush2106 before reusing the design.