Skip to the content
4 layers29.8 × 35 mmCustom ESP32 Board, the printed circuit board in 3D

Designed a custom ESP32-C3-mini microcontroller development board from schematic capture and footprint creation to final PCB layout and trace routing.

Size
29.8 × 35 mm
Copper layers
4
Thickness
1 mm
Parts
29
Nets
29
Pads
143
Tracks, vias
183, 38
Pours
7
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
12 Aug 2026
Updated
12 Aug 2026

Overview

Custom ESP32 Board is an open-source printed circuit board by diaseanodarren-hash, from the diaseanodarren-hash/Custom-ESP32-C3-mini-Microcontroller repository on GitHub. It is a 4-layer board of 29.8 × 35 mm with 29 parts on 29 nets, routed with 183 tracks and 38 vias.

It is built around the ESP32-C3-WROOM-02-H4, AP2112K-3.3 and USBLC6-2SC6, with the PESD5V0L1ULD among its other parts. Its parts include 10 capacitors, 9 resistors, 3 ICs, 3 connectors and 2 switches. It belongs with the ESP32 and RISC-V boards of this library.

Main components

4

README

README.md

Custom ESP32-C3 Microcontroller Board

Front-Demo

Key Features

  • MCU Core: ESP32-C3 single-core 32-bit RISC-V processor (up to 160 MHz).
  • Connectivity: Integrated 2.4 GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE).
  • Power & Interfaces:
    • USB-C interface for power delivery and UART/programming.
    • Low-dropout (LDO) regulator for stable 3.3V rail step-down.
    • ESD protection on data lines and ESD-aware ground layout.
  • Peripherals Exposed: GPIO, I2C, SPI, UART, and ADC pin headers.
  • Form Factor: Compact 4-layer PCB footprint optimized for breadboard and enclosure integration.

Schematic & Design Files

All design files were created using KiCad 10.0:

  • /production/: Fabrication-ready Gerber files, centroid file, and BOM.

  • Complete schematic files (Custom_ESP32_Board.kicad_sch). Schematic-Demo

  • PCB board layout files (Custom_ESP32_Board.kicad_pcb). PCB-Demo


Parts

29
QtyValueFootprintReferences
54u7Capacitor_SMD:C_0805_2012MetricC1, C2, C3, C4, C5
410KResistor_SMD:R_0402_1005MetricR5, R7, R8, R9
3100nCapacitor_SMD:C_0402_1005MetricC6, C9, C10
25k1Resistor_SMD:R_0402_1005MetricR1, R2
2Conn_01x08_PinConnector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ2, J3
2SW_PushButton_Switch_SMD:SW_SPST_B3U-1000PSW1, SW2
2TBDCapacitor_SMD:C_0201_0603MetricC7, C8
10rResistor_SMD:R_0805_2012MetricR3
1100RResistor_SMD:R_0402_1005MetricR6
1AP2112K-3.3Package_TO_SOT_SMD:SOT-23-5U2
1CrystalCrystal:Crystal_SMD_3215-2Pin_3.2x1.5mmY1
1ESP32-C3-WROOM-02RF_Module:ESP32-C3-WROOM-02U3
1PESD5V0L1ULDDiode_SMD:D_SOD-882DD1
1TBDResistor_SMD:R_0201_0603MetricR4
1USBLC6-2SC6Package_TO_SOT_SMD:SOT-23-6U1
1USB_C_Receptacle_USB2.0_16PConnector_USB:USB_C_Receptacle_G-Switch_GT-USB-7010ASVJ1

Similar boards

  • 2 layers33.3 × 38 mmESP32-C3-WROOM02 dev board, the printed circuit board in 3D

    ESP32-C3-WROOM02 dev board

    pushtiujeniya/ESP32-C3-WROOM02_dev-board

    This project is a custom 2-layer development board designed around the ESP32-C3-WROOM-02 Wi‑Fi + Bluetooth MCU module.

    30 parts2
  • 4 layers38 × 28.5 mmEsp32 iot pcb, the printed circuit board in 3D

    Esp32 iot pcb

    anasskrim61-wq/esp32-c3-mini

    Custom ESP32-C3 Mini IoT hardware design and KiCad PCB project

    29 parts1
  • 4 layers100.2 × 62.9 mmNN antenna manager, the printed circuit board in 3D

    NN antenna manager

    NozomiNetworks/NN-antenna-manager

    Open source project for a custom antenna manager for SDR cards

    71 parts1
  • 4 layers29.4 × 39.3 mmESP32 C3 Mini, the printed circuit board in 3D

    ESP32 C3 Mini

    Akshath2002/ESP32-Mini-Evaluation-Board

    A compact 4-layer ESP32 evaluation board designed in KiCad, focused on reliable power distribution, signal integrity, and ease of prototyping.

    29 parts
  • 2 layers75 × 51.5 mmDiy stream deck pcb, the printed circuit board in 3D

    Diy stream deck pcb

    Benjpp/diy-stream-deck-pcb

    PCB for hardware orchestrator from the diy stream deck

    44 parts
  • 4 layers34.4 × 42.5 mmThird project esp, the printed circuit board in 3D

    Third project esp

    BhautikSarvaiya/ESP32_C3_MINI

    This project focuses on designing a compact custom PCB based on the ESP32-C3 Mini microcontroller using KiCad 10.0.

    29 parts
  • 4 layers28.6 × 37.2 mmEsp32, the printed circuit board in 3D

    Esp32

    d3ckerd/Custom-ESP32

    Created a 4 layer custom esp32 dev board using the "ESP32-C3-WROOM-02" module. To learn much about how to create such a module I followed and learned from Pajopcb's youtube tutorials on the esp32.

    31 partsMIT
  • 2 layers94.5 × 37.5 mmESP 32, the printed circuit board in 3D

    ESP 32

    Keerthivasan-cdm/kicad-pcb-practice

    design practices of esp32 and play_u in smd

    77 parts

Questions

How big is the Custom ESP32 Board PCB?

It measures 29.8 × 35 mm and has 4 copper layers, 1 mm thick.

What parts does the Custom ESP32 Board use?

29 parts, built around the ESP32-C3-WROOM-02-H4, AP2112K-3.3, USBLC6-2SC6 and PESD5V0L1ULD. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Custom ESP32 Board KiCad files?

From the diaseanodarren-hash/Custom-ESP32-C3-mini-Microcontroller repository on GitHub, at the commit this page was made from: the board is Custom_ESP32_Board.kicad_pcb and its schematic Custom_ESP32_Board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Custom ESP32 Board design in my own project?

Its repository states no licence, so its author keeps all rights: ask diaseanodarren-hash before reusing the design.