2 layers87.4 × 56 mm
2 layers80 × 100 mm
Siplace feeder controller 96pin
TkkrLab/SchultzControllerG-code controller for Siemens S (Schultz) feeders
- Size
- 80 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 150
- Nets
- 174
- Pads
- 477
- Tracks, vias
- 706, 114
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 4 Apr 2023
- Updated
- 4 Apr 2023
Overview
Siplace feeder controller 96pin is an open-source printed circuit board by TkkrLab, from the TkkrLab/SchultzController repository on GitHub. It is a 2-layer board of 80 × 100 mm with 150 parts on 174 nets, routed with 706 tracks and 114 vias.
It is built around the BC846 and BC856. Its parts include 81 resistors, 60 transistors and 2 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2README
README.mdSchultzController
G-code controller for Siemens S (Schultz) feeders
Arduino based controller in the hardware section.
The controller board distributes power to the feeders and provides the communication interface for 20 feeder units (40 lanes of components). There are two versions of the controller board. The KiCad files are in this folder.
- The 4 pin version has 20 individual 4 pin connectors. One for each feeder unit.
- the 96 pin version has one 96 pin DIN connector compatible with the connector on the Siemens Communication Unit connector board. This board is Siemens 1710470-Y1032-C1-01-86 and is inside of 00316265S05.
Arduino code in the firmware section.
The board uses a Arduino Nano Every. This is a low cost arduino which can easily be soldered to the control board. Edit the config.h file in the arduino sketch to select the type of board you are using, then upload the sketch to the board.
Parts
150| Qty | Value | Footprint | References |
|---|---|---|---|
| 21 | 2K2 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R41, R62, R63, R64, R65, R66, R67, R68, R69, R70, R71, R92, R93, R94, R100, R101 +5 |
| 20 | 10K | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R52, R53, R54, R55, R56, R57, R58, R59, R60, R61, R82, R83, R84, R85, R86, R87 +4 |
| 20 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q21, Q22, Q23, Q24, Q25, Q26, Q27, Q28, Q29, Q30, Q41, Q42, Q43, Q44, Q45, Q46 +4 |
| 20 | 330 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R14, R15, R16, R17, R18, R19, R20, R21, R22, R23, R24, R25, R26, R34, R35, R36 +4 |
| 20 | 4K7 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R2, R3, R4, R5, R10, R11, R12, R13, R27, R28, R29, R30, R31, R32, R33 +4 |
| 20 | BC846 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4, Q5, Q10, Q11, Q12, Q13, Q14, Q15, Q16, Q17, Q18, Q19, Q20 +4 |
| 20 | BC856 | Package_TO_SOT_SMD:SOT-23 | Q31, Q32, Q33, Q34, Q35, Q36, Q37, Q38, Q39, Q40, Q51, Q52, Q53, Q54, Q55, Q56 +4 |
| 3 | Fiducial | Fiducial:Fiducial_1mm_Mask3mm | FID1, FID2, FID3 |
| 2 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2 |
| 1 | Arduino_Nano_Every | Arduino_Nano_33:NANO_33_Footprint_SMD_Castell | A1 |
| 1 | C96ABC | 5650889-5:TE_5650889-5 | J1 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J21 |
The 149 most common of 150 parts.
Questions
How big is the Siplace feeder controller 96pin PCB?
It measures 80 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Siplace feeder controller 96pin use?
150 parts, built around the BC846 and BC856. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Siplace feeder controller 96pin KiCad files?
From the TkkrLab/SchultzController repository on GitHub, at the commit this page was made from: the board is Hardware/siplace_feeder_controller_96pin/siplace_feeder_controller_96pin.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Siplace feeder controller 96pin design in my own project?
Its repository states no licence, so its author keeps all rights: ask TkkrLab before reusing the design.
Similar boards
- 2 layers83 × 83 mm
Siplace feeder controller
eilbek-research/er-schultzcontroller
G-code controller for Siemens S (Schultz) feeders
171 parts2 - 4 layers192 × 71.8 mm
Vfd clock
MG-5/vfd-clock-hardware
Hardware for controlling six VFD IV-17 tubes as clock (HH:MM:SS)
130 parts1MIT - 2 layers40 × 40 mm
Pcb layout
alexcrt12/p1-stabilizator-ers-orcad-schematic-kicad-layout
My Voltage regulator project, for which I have used OrCAD for the schematic and simulations and KiCad for the PCB layout
37 parts - 2 layers55.8 × 55.8 mm
ControlBoard
D3epCr3ature/RE-CPNV-ElectronicDice
Reverse engineering of an electronic dice assembled during my diploma of Vocational Education and Training (VET) in electronics.
27 parts - 2 layers49 × 48 mm
- 2 layers63 × 46 mm
- 2 layers65 × 71.5 mm
