Skip to the content
2 layers65 × 71.5 mmAlarm clock v3, the printed circuit board in 3D
Size
65 × 71.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
155
Nets
131
Pads
516
Tracks, vias
869, 367
Pours
2
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
4 May 2024
Updated
13 Jun 2024

Overview

Alarm clock v3 is an open-source printed circuit board by MG-5, from the MG-5/alarm-clock_hardware repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 65 × 71.5 mm with 155 parts on 131 nets, routed with 869 tracks and 367 vias.

It is built around the TPS62175DQC, HV5812P-G and LT3757AEMSE#PBF, with the MIC4801YM, BC846 and BC856 among its other parts. Its parts include 48 resistors, 32 capacitors, 24 diodes, 18 transistors and 8 ICs. It belongs with the lEDs and displays boards and the STM32 boards of this library.

Main components

12

README

README.md

alarm-clock_v3

Hardware for alarm clock with VFD display

Requirements for rev 1.0

  • 24V input
  • efficient boost converter up to 40V
  • control VFD display with multiplexing & dimming
  • control 24V CCT-LED strip (cold/neutral/warm white) with PWM
  • I²C interface
    • DS3231 as RTC
  • connection to ESP (UART)
  • battery-backup

Parts

155
QtyValueFootprintReferences
16ESD5ZxxDiode_SMD:D_SOD-523D6, D7, D8, D9, D10, D13, D14, D16, D17, D18, D19, D20, D21, D22, D23, D24
10100kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR8, R9, R18, R20, R25, R28, R31, R34, R37, R40
10100nCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC6, C7, C9, C12, C17, C19, C21, C22, C24, C32
710kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR2, R23, R26, R29, R32, R35, R38
6220kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR24, R27, R30, R33, R36, R39
6BC846Package_TO_SOT_SMD:SOT-23_HandsolderingQ4, Q6, Q8, Q10, Q12, Q14
6BC856Package_TO_SOT_SMD:SOT-23_HandsolderingQ5, Q7, Q9, Q11, Q13, Q15
4100n 35VCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC1, C3, C25, C26
4MountingHoleMountingHole:MountingHole_3.2mm_M3_ISO14580H1, H2, H3, H4
2100RResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR41, R43
210uInductor_SMD:L_1210_3225MetricL2, L3
21MResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR42, R44
21k5 1%Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR46, R48
21uCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC13, C16
222uCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC29, C31
22k2Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR21, R22
22u2 35VCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC28, C30
24k7 1%Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR45, R47
2IRLML0030Package_TO_SOT_SMD:SOT-23_HandsolderingQ17, Q18
2LED orangeConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalD1, D2
2RResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR1, R3
2TPS62175DQCPackage_SON:WSON-10-1EP_2x3mm_P0.5mm_EP0.84x2.4mm_ThermalViasU7, U8
110nCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC14
110nCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC18
110uCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC4
110u 16VCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC15
110u 35VCapacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolderC8
111kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR12
113kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR15
11nCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC10
11µ 50VCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC20
122Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR10
1220n 35VCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC11
122kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR11
122pCapacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolderC5
122u 35VCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC27
124k3Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR4
1270kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR14
1330kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR16
135VTestPoint:TestPoint_THTPad_D1.5mm_Drill0.7mmTP1
1390u (SRR7045-391M)Inductor_SMD:L_7.3x7.3_H4.5L1
147kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR17
147nCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC2
14R7Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR7
14u7Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC23
156kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR5
15k6Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR19
1680mResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR13
168RResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR6
19V 6LR61Connector_Molex:Molex_PicoBlade_53047-0210_1x02_P1.25mm_VerticalBT1
1B260S1F-7Diode_SMD:D_SOD-123D12
1BC846CPackage_TO_SOT_SMD:SOT-23_HandsolderingQ1
1ButtonPCBConnector_Molex:Molex_PicoBlade_53047-0610_1x06_P1.25mm_VerticalJ4
1C2Q 300Fuse:Fuse_0603_1608Metric_Pad1.05x0.95mm_HandSolderF2
1CSD17306Q5APackage_TO_SOT_SMD:TDSON-8-1Q19
1DS3231-moduleextraFootprints:DS3231-moduleU5
1ES1DDiode_SMD:D_SMA_HandsolderingD4
1ESPConnector_Molex:Molex_PicoBlade_53047-0410_1x04_P1.25mm_VerticalJ3
1FDN306PPackage_TO_SOT_SMD:SOT-23_HandsolderingQ2
1FDS2734Package_SO:SOIC-8_3.9x4.9mm_P1.27mmQ3
1GNDTestPoint:TestPoint_THTPad_D1.5mm_Drill0.7mmTP2
1HV5812Package_SO:SOIC-28W_7.5x17.9mm_P1.27mmU3
1LED stripConnector_Molex:Molex_PicoBlade_53047-0410_1x04_P1.25mm_VerticalJ7
1LM74700Package_TO_SOT_SMD:SOT-23-6U6
1LT3757AEMSEPackage_SO:MSOP-10-1EP_3x3mm_P0.5mm_EP1.68x1.88mmU1
1MIC4801Package_SO:PowerIntegrations_SO-8U4
1Mini-Kfz 3AextraFootprints:KEYSTONE-FUSE-3557-2F3
1OSRPMC3132AConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalD3
1PhotoresistorConnector_Molex:Molex_PicoBlade_53047-0210_1x02_P1.25mm_VerticalJ1
1ResetButton_Switch_SMD:SW_SPST_PTS810SW3
1STM32L433CCTxPackage_QFP:LQFP-48_7x7mm_P0.5mmU2
1SVM-06SS33extraFootprints:SVM-06SS33V1
1SWDConnector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical_SMDJ5
1SW_LeftButton_Switch_SMD:SW_SPST_PTS810SW1
1SW_RightButton_Switch_SMD:SW_SPST_PTS810SW2
1Schurter 3403.0155.24Fuse:Fuse_Schurter_UMT250F1
1SolderJumperJumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mmJP1
1TVS (P6SMB16CA)Diode_SMD:D_SMB_HandsolderingD11
1TVS (SMBJ26A)Diode_SMD:D_SMB_HandsolderingD15
1TVS TPSMB62ADiode_SMD:D_SMFD5

The 153 most common of 155 parts.

Similar boards

  • 4 layers192 × 71.8 mmVfd clock, the printed circuit board in 3D

    Vfd clock

    MG-5/vfd-clock-hardware

    Hardware for controlling six VFD IV-17 tubes as clock (HH:MM:SS)

    130 parts1MIT
  • 4 layers204 × 85 mmNixie clock, the printed circuit board in 3D

    Nixie clock

    MG-5/nixie-clock-hardware

    Hardware for controlling six Nixie IN-14 tubes as clock (HH:MM:SS)

    168 parts2MIT
  • 2 layers127 × 90 mmRadio usb, the printed circuit board in 3D

    Radio usb

    SP8EBC/radio-usb-interface

    USB <--> Land Mobile Radio interace with full ground isolation on 2way audio and PTT control

    225 parts3
  • 8 layers90.2 × 101.1 mmRevC fm, the printed circuit board in 3D

    RevC fm

    Sierra-Lobo/mainboard-hardware

    PyCubed mainboard v5 fork by Sierra Lobo for Foras Promineo CubeSat

    644 parts1
  • 6 layers111.8 × 61 mmInput board, the printed circuit board in 3D

    Input board

    waterloo-rocketry/fydp2026

    Master Repo for all FYDP 2026 related code and files

    179 parts
  • 2 layers143.5 × 64.8 mmNixie proj, the printed circuit board in 3D

    Nixie proj

    erickpires/NixieClock

    A Nixie Clock using an Atmel Atmega 328p

    93 parts2MIT
  • 2 layers118.1 × 76.2 mmTartarSauce, the printed circuit board in 3D

    TartarSauce

    patchez98/TartarSauce

    Replacement for Razer Nostromo / Tartarus / Orbweaver with mechanical switches and analog thumbstick

    105 parts2

Questions

How big is the Alarm clock v3 PCB?

It measures 65 × 71.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Alarm clock v3 use?

155 parts, built around the TPS62175DQC, HV5812P-G, LT3757AEMSE#PBF and MIC4801YM. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Alarm clock v3 KiCad files?

From the MG-5/alarm-clock_hardware repository on GitHub, at the commit this page was made from: the board is alarm-clock_v3.kicad_pcb and its schematic 3V3-step-down.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Alarm clock v3 design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).