
Mini climate control
MAIK97MAX/mini-climate-control
A miniature climate control unit which is remotely controlled

KiCad and Arduino files for my sensor scales project
Quiz master v3 is an open-source printed circuit board by tjmcguire95, from the tjmcguire95/Sensor-scales repository on GitHub. It is a 2-layer board of 133.1 × 90 mm with 73 parts on 77 nets, routed with 532 tracks and 173 vias.
It is built around the ESP32-S3-WROOM-1-N8, HX711 and AP2112K-3.3, with the TP4056-42-ESOP8, USBLC6-2SC6 and RC0805FR-0710KL among its other parts. Its parts include 22 capacitors, 16 resistors, 7 ICs, 5 connectors and 4 diodes. It belongs with the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C2, C7, C9, C10, C13, C15, C17, C19, C22 |
| 8 | 10uF | Capacitor_SMD:C_0805_2012Metric | C1, C5, C6, C8, C12, C14, C16, C18 |
| 5 | 10k | Resistor_SMD:R_0603_1608Metric | R2, R4, R5, R9, RTEMP1 |
| 4 | 22uF | Capacitor_SMD:C_1210_3225Metric | C3, C4, C20, C21 |
| 2 | 100R | Resistor_SMD:R_0805_2012Metric | R4_RedLed1, R5_GreenLed1 |
| 2 | 100k | Resistor_SMD:R_0603_1608Metric | R3, R8 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric | R1_GreenLed1, R2_RedLed1 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric | CHRG_R1, STDBY_R1 |
| 2 | 4.7uH | Inductor_SMD:L_6.3x6.3_H3 | L1, L2 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R6, R7 |
| 2 | AO3400A | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | Conn_01x02 | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | BATT_Input, Power_Switch |
| 2 | SS24 | Diode_SMD:D_SMA | D1, D4 |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_TL3342 | BOOT1, RESET1 |
| 2 | ~ | Package_TO_SOT_SMD:SOT-23-6 | U1, U7 |
| 1 | 191k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 2.4k | Resistor_SMD:R_0603_1608Metric | RPROG1 |
| 1 | 470 | Capacitor_THT:CP_Radial_D8.0mm_P5.00mm | C2_470uf_12Vboost1 |
| 1 | 470R | Resistor_SMD:R_0805_2012Metric | R3_GreenLed1 |
| 1 | 75k | Resistor_SMD:R_0603_1608Metric | R10 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | CHRG LED | Connector_Wire:SolderWire-0.5sqmm_1x02_P4.8mm_D0.9mm_OD2.3mm | D2 |
| 1 | Calibrate btn solder pads | Connector_Wire:SolderWire-0.5sqmm_1x02_P4.6mm_D0.9mm_OD2.1mm | J6 |
| 1 | Conn_01x04_Pin | Connector_JST:JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | J1 |
| 1 | ESP32-S3-WROOM-1 | RF_Module:ESP32-S3-WROOM-1 | U3 |
| 1 | Green Led JST_PH | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | G_LED |
| 1 | HX711 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U6 |
| 1 | Pause btn solder pads | Connector_Wire:SolderWire-0.5sqmm_1x02_P4.6mm_D0.9mm_OD2.1mm | J5 |
| 1 | Polyfuse | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | Red Led JST_PH | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | R_LED |
| 1 | STDBY LED | Connector_Wire:SolderWire-0.5sqmm_1x02_P4.8mm_D0.9mm_OD2.3mm | D3 |
| 1 | TM1637 Display pin headers | Connector_JST:JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | J13 |
| 1 | TP4056-42-ESOP8 | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm_ThermalVias | U5 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U4 |
| 1 | USB_C_Receptacle_USB2.0_14P | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J2 |
The 69 most common of 73 parts.

MAIK97MAX/mini-climate-control
A miniature climate control unit which is remotely controlled

huulanka/wisp
Open-source ESP32 room climate monitor — CO2, VOC, humidity, temperature and light sensing with custom PCB, MQTT/HomeKit integration, and OTA firmware updates. Full hardware + software, from schematic to BOM.


HYLDAIC/Flagshep-V1_Audio-Player
A high fidelity semi-portable audio player student project with provided PCB files, 3D files and Code

TutuThePerson/StudyKeyChain
No clue. jk. I just finished 2 months of A-levels and being grinding those past papers for atleast half a year now; I realise it is really demoralising to be studying 3 in the morning alone - so this idea stemmed from…


md-sazzad-eee/ATLAS
Modular multi-robot system: a carrier robot that docks, transports, charges and redeploys two small agent robots. KiCad, FreeCAD, MATLAB/Simulink, COMSOL and ESP32 firmware.

Matyas604/Security-Alarm-Panel
Home Assistant Smart Home Alarm Control Panel with fingerprint reader, NFC/RFID card reader, motion radar, and touchscreen TFT display. It can control your smart home, not just your home security system.
It measures 133.1 × 90 mm and has 2 copper layers, 1.6 mm thick.
73 parts, built around the ESP32-S3-WROOM-1-N8, HX711, AP2112K-3.3 and TP4056-42-ESOP8. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the tjmcguire95/Sensor-scales repository on GitHub, at the commit this page was made from: the board is QuizKnight_V3/Quiz master v3.kicad_pcb and its schematic QuizKnight_V3/12V_Boost.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask tjmcguire95 before reusing the design.