
Weerstation analoog
tjallingk/airostation
some pcbs for diy outdoor data sensor for weather and air quality monitoring using mostly i2c and an esp32 dev board. not really tested.

some pcbs for diy outdoor data sensor for weather and air quality monitoring using mostly i2c and an esp32 dev board. not really tested.
Weerstation main is an open-source printed circuit board by tjallingk, from the tjallingk/airostation repository on GitHub. It is a 2-layer board of 100 × 100 mm with 55 parts on 97 nets, routed with 429 tracks and 103 vias.
It is built around the TCA9548APW, BME280 and VL53L0X, with the HC-SR04 among its other parts. Its parts include 35 connectors, 2 capacitors, 2 ICs and 1 resistor. It belongs with the sensors and measurement boards and the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | MountingHole | MountingHole:MountingHole_long | H1, H2, H3, H4, H5, H6, H7, H8, H9, H10, H11, H12 |
| 5 | ina226 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J3, J5, J7, J8, J30 |
| 2 | 100uf | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C8 |
| 2 | PCA9685 servo controller | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J10, J33 |
| 2 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP1, JP2 |
| 2 | mpu-9265 | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J9, J29 |
| 1 | 5k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1 |
| 1 | ESP32-DEVKIT-V1 | esp32-dev-module:MODULE_ESP32_DEVKIT_V1 | U1 |
| 1 | Jumper_3_Open | Jumper:SolderJumper-3_P1.3mm_Open_Pad1.0x1.5mm | JP3 |
| 1 | TCA9548A | i2c multiplexer:MODULE_2717 | U3 |
| 1 | VL53L0X | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J25 |
| 1 | analoog bord connector | Connector_JST:JST_XH_B3B-XH-AM_1x03_P2.50mm_Vertical | J16 |
| 1 | analoog bord connector (digitaal) | Connector_JST:JST_XH_B5B-XH-AM_1x05_P2.50mm_Vertical | J2 |
| 1 | bme280 | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J4 |
| 1 | digitaal bord connector power | Connector_JST:JST_XH_B4B-XH-AM_1x04_P2.50mm_Vertical | J32 |
| 1 | ens160+aht21 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J27 |
| 1 | hc-sr04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J26 |
| 1 | levelshift hv | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J34 |
| 1 | levelshift lv | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J31 |
| 1 | regenmeter digitaal flip sensor | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J28 |
| 1 | rotatie as5600 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J12 |
| 1 | rotatie as5600 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J6 |
| 1 | rotatie as5600 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J11 |
| 1 | rotatie as5600 2 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J14 |
| 1 | rotatie as5600 2 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J15 |
| 1 | rotatie as5600 2 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J13 |
| 1 | rotatie as5600 3 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J17 |
| 1 | rotatie as5600 3 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J19 |
| 1 | rotatie as5600 3 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J18 |
| 1 | rotatie as5600 4 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J20 |
| 1 | rotatie as5600 4 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J21 |
| 1 | rotatie as5600 4 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J22 |
| 1 | sds011 pm10 pm2.5 dust sensor | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J1 |
| 1 | servo_power | TerminalBlock_Altech:Altech_AK100_1x02_P5.00mm | J35 |
| 1 | temp sensor AM2315C | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J23 |
| 1 | veml 7700 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J24 |

tjallingk/airostation
some pcbs for diy outdoor data sensor for weather and air quality monitoring using mostly i2c and an esp32 dev board. not really tested.

tjallingk/airostation
some pcbs for diy outdoor data sensor for weather and air quality monitoring using mostly i2c and an esp32 dev board. not really tested.


/Old%200/Misc%20Circuits%20%26%20Adapters/Misc%20Circuits%20%26%20Adapters.kicad_pcb.jpg?size=s&soon)

udu3324/stm32pe-midi
a midi controller using the mpe protocol to create more expressive music

MacMannes/XVA1-User-Interface
A hardware user interface for the XVA1 virtual analog synthesizer, inspired by the Hydrasynth's layout. The XVA1 (and its FM sibling the XFM2) is built on an Artix-7 FPGA but has no built-in UI — this project adds one.

Lytrix/max4live_controller_w_oled
max4live OSC controller with 3 12 bit magnetic encoders, 2 push buttons and oled screen

Scottapotamas/triaxial-loadcell-breakout
Breakout board to sample 3-axis load cells with I2C interface

It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
55 parts, built around the TCA9548APW, BME280, VL53L0X and HC-SR04. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the tjallingk/airostation repository on GitHub, at the commit this page was made from: the board is pcb-files/main-digital/weerstation-main.kicad_pcb and its schematic pcb-files/analog/weerstation-analoog.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask tjallingk before reusing the design.