Skip to the content
2 layers99.1 × 99.1 mmWeerstation analoog, the printed circuit board in 3D

Weerstation analoog

tjallingk/airostation

some pcbs for diy outdoor data sensor for weather and air quality monitoring using mostly i2c and an esp32 dev board. not really tested.

Size
99.1 × 99.1 mm
Copper layers
2
Thickness
1.6 mm
Parts
65
Nets
34
Pads
193
Tracks, vias
354, 75
Pours
2
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
16 Nov 2024
Updated
28 Aug 2025

Overview

Weerstation analoog is an open-source printed circuit board by tjallingk, from the tjallingk/airostation repository on GitHub. It is a 2-layer board of 99.1 × 99.1 mm with 65 parts on 34 nets, routed with 354 tracks and 75 vias.

Its parts include 30 capacitors, 17 connectors and 14 resistors. It belongs with the sensors and measurement boards of this library.

Parts

65
QtyValueFootprintReferences
16100ufCapacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolderC1, C3, C4, C5, C6, C8, C9, C10, C11, C13, C15, C16, C17, C18, C19, C20
810ufCapacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolderC2, C7, C12, C14, C23, C24, C26, C30
6100nfCapacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolderC21, C22, C25, C27, C28, C29
4100kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR8, R10, R12, R14
4LDR07Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalR7, R9, R11, R13
4MountingHole_PadMountingHole:MountingHole_2.7mm_M2.5_PadH1, H2, H3, H4
3220kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR2, R4, R6
3R_VariableConnector_JST:JST_XH_B2B-XH-AM_1x02_P2.50mm_VerticalR1, R3, R5
15vConnector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_VerticalJ14
1ADC 4 inputsConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ13
1adc_alertsConnector_JST:JST_XH_B5B-XH-AM_1x05_P2.50mm_VerticalJ11
1ads1115 (1)Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_VerticalJ3
1ads1115 (2)Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_VerticalJ4
1ads1115 (3)Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_VerticalJ6
1ads1115 (4)Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_VerticalJ5
1bodemsensor1 pinsConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ8
1bodemsensor2 pinsConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ7
1gndConnector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_VerticalJ15
1i2c in outConnector_JST:JST_XH_B3B-XH-AM_1x03_P2.50mm_VerticalJ1
1levelshift hvConnector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_VerticalJ17
1levelshift lvConnector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_VerticalJ16
1power-inConnector_JST:JST_XH_B4B-XH-AM_1x04_P2.50mm_VerticalJ2
1regensensor1 pinsConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ9
1regensensor2 pinsConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ10
1sound meterConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ12

More from tjallingk/airostation

2
  • 2 layers100 × 100 mmWeerstation main, the printed circuit board in 3D

    Weerstation main

    tjallingk/airostation

    some pcbs for diy outdoor data sensor for weather and air quality monitoring using mostly i2c and an esp32 dev board. not really tested.

    55 parts
  • 2 layers100 × 100 mmWeerstation power, the printed circuit board in 3D

    Weerstation power

    tjallingk/airostation

    some pcbs for diy outdoor data sensor for weather and air quality monitoring using mostly i2c and an esp32 dev board. not really tested.

    37 parts

Similar boards

  • 2 layers42 × 67 mmLalboard, the printed circuit board in 3D

    Lalboard

    JesusFreke/lalboard

    A 3D-printed keyboard inspired by the DataHand

    65 parts993
  • 2 layers198.1 × 30.5 mmSplitflap driver, the printed circuit board in 3D

    Splitflap driver

    drandyhaas/KiCadRoutingTools

    A set of Python/Rust tools to aid routing in KiCad

    65 parts744MIT
  • 2 layers74.8 × 32.5 mmMooltipass mini, the printed circuit board in 3D

    Mooltipass mini

    limpkin/mooltipass

    Github repository dedicated to the mooltipass project

    65 parts531
  • 2 layers60 × 100 mmV3 Connector Only, the printed circuit board in 3D

    V3 Connector Only

    PiTracLM/PiTrac

    Launch monitor using low-cost raspberry pi and camera hardware to determine ball launch speed, angles and spin. See https://discord.gg/vGuyAAxXJH (permalink)

    65 parts439GPL-2.0
  • 2 layers45 × 58.2 mmOpentama, the printed circuit board in 3D

    Opentama

    Sparkr-tech/opentama

    An open-source reference design for MCUGotchi

    65 parts237
  • 2 layers40 × 120 mmPhotodiode board v3, the printed circuit board in 3D

    Photodiode board v3

    0x23/nmWave-Interferometer

    An Open Source Interferometer for Accurate Distance Measurements

    65 parts151MIT
  • 2 layers78 × 130 mmLofence, the printed circuit board in 3D

    Lofence

    kiu/lofence

    LoFence is a LoRaWAN capable IoT electric fence monitoring system running on the The Things Network.

    65 parts142MIT

Questions

How big is the Weerstation analoog PCB?

It measures 99.1 × 99.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Weerstation analoog use?

65 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Weerstation analoog KiCad files?

From the tjallingk/airostation repository on GitHub, at the commit this page was made from: the board is pcb-files/analog/weerstation-analoog.kicad_pcb and its schematic pcb-files/analog/weerstation-analoog.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Weerstation analoog design in my own project?

Its repository states no licence, so its author keeps all rights: ask tjallingk before reusing the design.