
Caravel breakout fpga ICE40UP5K TT3
TinyTapeout/breakout-pcb
Tiny Tapeout breakout PCBs

Tiny Tapeout breakout PCBs
Dip dock is an open-source printed circuit board by TinyTapeout, from the TinyTapeout/breakout-pcb repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 85 × 85 mm with 191 parts on 72 nets, routed with 535 tracks and 111 vias.
It is built around the NC7SV14P5X, RC0402FR-0710KL and CR0402-FX-1001GLF, with the PPTC062LJBN-RC, RMCF0402ZT0R00 and DSPV08LSGET among its other parts. Its parts include 37 resistors, 13 connectors, 10 capacitors, 3 ICs and 3 switches.

| Qty | Value | Footprint | References |
|---|---|---|---|
| 103 | StitchingVia-0.4mmDrill | flyingcarsfootprints:StitchingVia-0.4mmDrill | STITCH01, STITCH01, STITCH01, STITCH01, STITCH01, STITCH01, STITCH01, STITCH01, STITCH01, STITCH01, STITCH01, STITCH01, STITCH01, STITCH01, STITCH01, STITCH01 +87 |
| 17 | 510 | Resistor_SMD:R_0402_1005Metric | R17, R18, R19, R20, R21, R22, R23, R24, R28, R29, R30, R31, R32, R33, R34, R35 +1 |
| 14 | 10k | Resistor_SMD:R_0402_1005Metric | R1, R2, R3, R4, R5, R7, R9, R10, R11, R12, R16, R25, R26, R27 |
| 8 | SolderJumper_2_Bridged | TinyTapeout:SolderJumper-2_0603 | JP1, JP2, JP3, JP4, JP5, JP6, JP7, JP8 |
| 6 | 100n | Capacitor_SMD:C_0402_1005Metric | C1, C2, C4, C5, C7, C9 |
| 4 | 1k | Resistor_SMD:R_0402_1005Metric | R6, R8, R14, R37 |
| 4 | 1uF | Capacitor_SMD:C_0603_1608Metric | C3, C6, C8, C10 |
| 4 | StitchingVia-0.3mm | flyingcarsfootprints:StitchingVia-0.3mm | STITCHSM01, STITCHSM01, STITCHSM01, STITCHSM01 |
| 3 | 613012243121 | TinyTapeout:PinSocket_2x06_P2.54mm_PMODHost1A | J5, J6, J7 |
| 3 | Fiducial | Fiducial:Fiducial_1mm_Mask2mm | FID1, FID2, FID3 |
| 2 | 434121025816 | TinyTapeout:434121025816 | SW1, SW2 |
| 2 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2, J4 |
| 2 | Conn_01x02 | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J1, J3 |
| 2 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J9, J11 |
| 2 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J8, J10 |
| 2 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad | MT1, MT2 |
| 2 | NC7SP14P5X | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U1, U2 |
| 2 | PSYLOGO | flyingcarsfootprints:PsychoLogoSmall | PSYLOGO01, PSYLOGO01 |
| 2 | TT_logo | Logos:TT_logo | TTLOGO1, TTLOGO1 |
| 1 | 0 | Resistor_SMD:R_0402_1005Metric | R13 |
| 1 | 0R | Resistor_SMD:R_0805_2012Metric | R15 |
| 1 | 157112V12700 | TinyTapeout:WL_S7DS-157112V12700 | U3 |
| 1 | 193-8MSR | TinyTapeout:GENERIC_PIANO_8DIP | SW3 |
| 1 | Conn_01x16 | Connector_PinHeader_2.54mm:PinHeader_1x16_P2.54mm_Vertical | J12 |
| 1 | Yellow | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | ~ | Socket:DIP_Socket-32_W11.9mm_W12.7mm_W15.24mm_W17.78mm_W18.5mm_3M_232-1285-00-0602J | CON1 |

TinyTapeout/breakout-pcb
Tiny Tapeout breakout PCBs












efabless/chipignite_discover
This FPGA experimentation and development board was developped for efabless chipignite workshops and labs to serve as an easy to use experimentation board and stepping stone towards ASIC digital design, allowing for…

mole99/waferspace-main-pcb
Main PCB for wafer.space FABulous FPGA

chilly23/PCBGolf-master-Comma.ai
Compact PCB studies for the comma.ai PCBGolf challenge, including KiCad and EasyEDA designs, BOMs, STEP models, and routing-status reports.

ulyssecrn/PCBGolf
comma.ai PCBGolf entry: 4-port CAN-FD dev board on a 35 × 43 mm, 4-layer PCBA. KiCad 10.

BerkeleyLab/Marble
Dual FMC FPGA carrier board developed for general purpose use in particle accelerator electronics instrumentation.

BerkeleyLab/Marble-Mini
"Marble-Mini" Simple FMC carrier board with SFP, 2x FMC, PoE

oresat/oresat-dxwifi-hardware
OreSat hardware for high speed data communications using 2.4 GHz WiFi.
It measures 85 × 85 mm and has 2 copper layers, 1.56 mm thick.
191 parts, built around the NC7SV14P5X, RC0402FR-0710KL, CR0402-FX-1001GLF and PPTC062LJBN-RC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the TinyTapeout/breakout-pcb repository on GitHub, at the commit this page was made from: the board is dip-dock/dip-dock.kicad_pcb and its schematic ASIC-simulator/tt03-fpga-ICE40UP5k/caravel-breakout-fpga-ICE40UP5K-TT3.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).