2 layers85 × 54 mm
Teds business card
DovydasTEDS/teds-business-card
an nfc business card with (i think) cool (sorta) artwork which took me longer than it should've it also has a qr code
5 parts
2 layers23.4 × 53.1 mm
Pico led example
timholthuijsen/PCBDesignRepository for PCB Design and KiCAD work
- Size
- 23.4 × 53.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 38
- Pads
- 110
- Tracks, vias
- 24, 4
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 18 Mar 2024
- Updated
- 18 Mar 2024
Overview
Pico led example is an open-source printed circuit board by timholthuijsen, from the timholthuijsen/PCBDesign repository on GitHub. It is a 2-layer board of 23.4 × 53.1 mm with 13 parts on 38 nets, routed with 24 tracks and 4 vias.
It is built around the KT-0805W. Its parts include 3 resistors, 3 diodes, 1 IC and 1 transistor. It belongs with the RP2040 boards of this library.
Main components
1Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP101, TP102, TP103, TP201 |
| 3 | KT-0805W | example-footprints:LED0805 | D201, D202, D203 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R201 |
| 1 | 1M | Resistor_SMD:R_0603_1608Metric | R202 |
| 1 | FENRIR LOGO | example-footprints:FENRIR_copper_8x8mm | FENRIR201 |
| 1 | PMOS 20V DS | example-footprints:SOT-23 | Q201 |
| 1 | Pico | MCU_RaspberryPi_and_Boards:RPi_Pico_SMD_TH | U101 |
| 1 | R | Resistor_SMD:R_0805_2012Metric | R203 |
Questions
How big is the Pico led example PCB?
It measures 23.4 × 53.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pico led example use?
13 parts, built around the KT-0805W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pico led example KiCad files?
From the timholthuijsen/PCBDesign repository on GitHub, at the commit this page was made from: the board is pico-led-example/pico-led-example.kicad_pcb and its schematic pico-led-example/components.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pico led example design in my own project?
Its repository states no licence, so its author keeps all rights: ask timholthuijsen before reusing the design.
Similar boards
- 4 layers
MagneticLevitation
dweggg/MagneticLevitation
My take on one of those active magnetic levitation projects.
149 parts - 2 layers74 × 69 mm
- 2 layers431.2 × 126.4 mm
Convertible keyboard pcb
TechnikWeber/convertible-keyboard-pcb
Convertible keyboard PCB: full-size ISO-DE & ANSI with a snap-off numpad that turns it into a TKL (RP2040, USB-C, KiCad). Cheap, clean, modern core to build on — looking for a case designer.
504 parts - 2 layers40 × 40 mm
- 4 layers70 × 157.5 mm
Controller Tv Lift
vyrubaev/TV-Lift-Controller
TVLift Controller is an intelligent controller for TV lift and lower mechanisms, based on the ESP32 microcontroller.
103 parts - 2 layers73.9 × 56.4 mm
Esp32 minimal
enliktjioe/three-workshops
HfK Bremen - Three Workshops course from Ralf Baecker
26 partsGPL-3.0 - 2 layers20 × 24 mm
Ialed
fredowski/ialf
Linefollower board based on Raspberry Pi Pico with Seeed Grove Connectors and DRV8835 motor driver.
11 parts