2 layers65 × 56.5 mm
SuperPower RPi KiCAD
SensorsIot/SuperPower
Here you should find the best power supplies for your low-power projects
122 parts600
2 layers
Glowy nfc reader module
timhawes/glowy_nfc_reader_module_pcb- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 11
- Nets
- 9
- Pads
- 37
- Tracks, vias
- 106, 11
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 21 Jul 2019
- Updated
- 21 Jul 2019
Overview
Glowy nfc reader module is an open-source printed circuit board by timhawes, from the timhawes/glowy_nfc_reader_module_pcb repository on GitHub. It is a 2-layer board with 11 parts on 9 nets, routed with 106 tracks and 11 vias.
It is built around the ATTINY85-20SU. Its parts include 3 connectors, 2 capacitors, 2 resistors and 2 ICs. It belongs with the radio and wireless boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
1Parts
11| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 10K | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 1K | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | ATtiny85-20SU | Package_SO:SOIJ-8_5.3x5.3mm_P1.27mm | U1 |
| 1 | CONTROLLER | timhawes:Solder_Connection_4way_with_cable_tie | J3 |
| 1 | ICSP | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J4 |
| 1 | PN532 | timhawes:ELECHOUSE_PN532_V4_USART_I2C | U2 |
| 1 | Speaker | Buzzer_Beeper:Buzzer_Murata_PKMCS0909E4000-R1 | LS1 |
| 1 | WS2812_OUT | timhawes:Solder_Connection_3way | J5 |
The 10 most common of 11 parts.
Questions
What parts does the Glowy nfc reader module use?
11 parts, built around the ATTINY85-20SU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Glowy nfc reader module KiCad files?
From the timhawes/glowy_nfc_reader_module_pcb repository on GitHub, at the commit this page was made from: the board is glowy_nfc_reader_module.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Glowy nfc reader module design in my own project?
Its repository states no licence, so its author keeps all rights: ask timhawes before reusing the design.
Similar boards
- 2 layers18.8 × 8.1 mm
Dell charger emulator
KivApple/dell-charger-emulator
Emulator of original Dell charger using ATTINY85
6 parts154 - 2 layers14 × 17.3 mm
- 2 layers43.9 × 29 mm
C64Saver2-addon
bwack/C64-Saver-bwack
C64 Saver v1 and v2 - Overvoltage protection for the C64 and its power brick.
43 parts124 - 2 layers61 × 36.8 mm
- 2 layers200 × 100 mm
Regalodilara
valerionew/very-good-uc-doggos
A special graduation present for a special friend. Six microcontrollers in one devboard
91 parts50 - 2 layers134.3 × 140 mm
- 2 layers50 × 25 mm
LoRa Environmental Sensors
spielhuus/LoRa-Environmental-Sensors
ATtiny85 based LoRa atmospheric sensor board with BME280
5 parts28