Skip to the content
2 layers150 × 60 mmSchiff, the printed circuit board in 3D

Building a self-stabilizing RC hydrofoil.

Size
150 × 60 mm
Copper layers
2
Thickness
1.6 mm
Parts
40
Nets
72
Pads
155
Tracks, vias
234, 36
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
20 Apr 2026
Updated
14 Aug 2026

Overview

Schiff is an open-source printed circuit board by timbelmon, from the timbelmon/CAD_Hydrofoil repository on GitHub, published under the MIT licence. It is a 2-layer board of 150 × 60 mm with 40 parts on 72 nets, routed with 234 tracks and 36 vias.

It is built around the L298N. Its parts include 10 capacitors, 6 connectors, 4 resistors, 2 switches and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

1

README

README.md

CAD Hydrofoil

Semester project focused on developing a self-stabilizing RC hydrofoil.

The system uses a T-foil design with custom PCB-based water sensors acting as the control “legs” to detect water contact and stabilize the craft in real time.

Core components:

  • Custom-designed hydrofoil (CAD)
  • Self-manufactured PCBs (water sensing + control)
  • Arduino-based control system

The goal is to create a fully integrated, self-stabilizing hydrofoil platform combining mechanical design, electronics, and embedded control.

Basic Sketch

sketch

Parts

40
QtyValueFootprintReferences
6NetTie_2LibraryNewHoleSize:NetTie_1.6mmNT1, NT2, NT3, NT5, NT6, NT8
5470uCapacitor_THT:CP_Radial_D6.3mm_P2.50mmC1, C2, C3, C4, C6
4MountingHoleMountingHole:MountingHole_3.2mm_M3H1, H2, H3, H4
3100nCapacitor_THT:C_Disc_D3.4mm_W2.1mm_P2.50mmC7, C8, C10
3Motor_ServoLibraryNewHoleSize:PinHeader_1x03_P2.54mm_VerticalM1, M2, M3
210uLibraryNewHoleSize:CP_Radial_D4.0mm_P2.00mmC5, C9
2Arduino_Nano_v3.xLibraryNewHoleSize:Arduino_Nano_WithMountingHolesA1, A2
2NetTie_2LibraryNewHoleSize:NetTie_4mmNT4, NT7
2RResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1, R3
2R_VariableTerminalBlock:TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mmR2, R4
2SW_Wuerth_450301014042Button_Switch_THT:SW_Slide-03_Wuerth-WS-SLTV_10x2.5x6.4_P2.54mmSW1, SW2
2Screw_Terminal_01x02TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mmJ5, J6
1AMS1117-ModuleTerminalBlock:TerminalBlock_MaiXu_MX126-5.0-04P_1x04_P5.00mmJ3
1Conn_01x02TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mmJ1
1L298NTerminalBlock:TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mmJ2
1L298NTerminalBlock:TerminalBlock_MaiXu_MX126-5.0-04P_1x04_P5.00mmJ4
1NRF24L01_BreakoutLibraryNewHoleSize:nRF24L01_BreakoutU1

More from timbelmon/CAD_Hydrofoil

3
  • 2 layers80 × 65 mmRemote, the printed circuit board in 3D

    Remote

    timbelmon/CAD_Hydrofoil

    Building a self-stabilizing RC hydrofoil.

    16 partsMIT
  • 2 layers86 × 42 mmKiCad Batterypack, the printed circuit board in 3D

    KiCad Batterypack

    timbelmon/CAD_Hydrofoil

    Building a self-stabilizing RC hydrofoil.

    7 partsMIT
  • 2 layers200 × 40 mmFoils, the printed circuit board in 3D

    Foils

    timbelmon/CAD_Hydrofoil

    Building a self-stabilizing RC hydrofoil.

    7 partsMIT

Similar boards

  • 2 layers76.1 × 85 mmFlypi, the printed circuit board in 3D

    Flypi

    amchagas/Flypi

    This is the repository for the flypi project

    45 parts88GPL-2.0
  • 4 layers85 × 54 mmPECDR, the printed circuit board in 3D

    PECDR

    pedro-ibs/trekking

    Desenvolvimento de um robô rádio-controlado/autônomo da moralidade “tracker”

    68 parts9
  • 2 layers66.3 × 34.3 mmC64PSUv3, the printed circuit board in 3D

    C64PSUv3

    FabioNMI/C64PSU

    A low-cost, lightweight and very reliable power supply for the Commodore 64

    37 parts2
  • 2 layersRoboForce, the printed circuit board in 3D

    RoboForce

    Khuzhin06/RoboForce

    Тогда вы не зря зашли к нам, мы постараемся максимально подробно и быстро рассказать о нашем пути создания робота на ROS2 Jazzy и esp32,по этим материалам вы с легкостью сможете повторить этот проект.

    3 parts2
  • 2 layersRP2040 minimal, the printed circuit board in 3D

    RP2040 minimal

    ltherreraro/Wally

    Recolector de basura espacios cerrados usando esp32

    58 parts2
  • 2 layers127 × 117.5 mmDiy ert, the printed circuit board in 3D

    Diy ert

    CainPatel/diy-ert

    A $150 four-electrode earth resistivity meter (Wenner array): Arduino, AD620, ADS1115. Documented failure-first as an engineering log.

    44 parts1MIT
  • 2 layers99.5 × 99.5 mmSchematicKiCadProyect, the printed circuit board in 3D

    SchematicKiCadProyect

    dduarteCE/Robot-vacuum

    Embedded Linux robotic vacuum system built with Yocto on Raspberry Pi 4, featuring autonomous navigation, audio playback, and remote control through a web interface.

    42 parts1MIT
  • 2 layers62.3 × 42.9 mmL298N, the printed circuit board in 3D

    L298N

    engnourmo/L298N-PCB-

    L298N (schematic and layout)

    27 parts1

Questions

How big is the Schiff PCB?

It measures 150 × 60 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Schiff use?

40 parts, built around the L298N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Schiff KiCad files?

From the timbelmon/CAD_Hydrofoil repository on GitHub, at the commit this page was made from: the board is KiCad_Schiff/Schiff.kicad_pcb and its schematic KiCad_Batterypack/KiCad_Batterypack.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Schiff design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).