
Buck
Tim4769/Microver
Swiss Rover Challenge rover project with final electronics, mechanical handoff files, PCB validation firmware, and shared project assets.

Swiss Rover Challenge rover project with final electronics, mechanical handoff files, PCB validation firmware, and shared project assets.
Microver2026 Modular Final is an open-source printed circuit board by Tim4769, from the Tim4769/Microver repository on GitHub. It is a 4-layer board of 100 × 135 mm with 66 parts on 74 nets, routed with 1,038 tracks and 493 vias.
It is built around the CSD18543Q3A, MIC5365-3.3YD5-TR and 1MS1T1B1M2QES. Its parts include 23 connectors, 10 capacitors, 5 ICs, 3 resistors and 3 diodes. It belongs with the robots and motor control boards of this library.

Microver is a compact rover built for the Swiss Rover Challenge. This repository collects the project's electronics, mechanical CAD, software scaffold, PCB test firmware, photos, and shared assets in one place.
| Area | Path | Contents |
|---|---|---|
| Electronics | hardware/final/README.md | Active PCB revisions, KiCad projects, manufacturing outputs, and validation notes. |
| Mechanical | mechanical/README.md | Rover assemblies, wheel pods, chassis parts, mechanisms, mounts, and STEP exports. |
| Software | software/ | Python rover-control scaffold with camera and control services. |
| PCB test firmware | hardware/pcb_testing_firmware/README.md | Arduino sketches and docs for board bring-up and electronics validation. |
| Power diagrams | hardware/flow_charts/README.md | Power-system flow charts and supporting diagrams. |
Electronics
hardware/final/; archived board spins live under hardware/archive/.Mechanical
mechanical/assemblies/ and mechanical/components/.Software
software/ is the autonomy-ready rover software workspace for control, camera, perception, navigation, and system integration.hardware/pcb_testing_firmware/ contains electronics bring-up and validation sketches only; it is separate from the final software stack.hardware/ - PCB designs, manufacturing files, archived board revisions, power diagrams, and PCB validation firmware.mechanical/ - CAD assemblies, exported STEP components, manufacturing notes, and mechanical integration references.software/ - Raspberry Pi control software scaffold and future rover software workspace.photos/ - Build, test, and competition photos.logo/ - Current and legacy logo assets.jingle/ - Project audio assets.Microver_presentation_final.pdf - Final presentation and system overview.All rights reserved. No permission is granted to use, copy, modify, or distribute this repository or its contents without prior written consent. See LICENSE for exact terms.
Contact: Tim Wang - timwang007@outlook.com.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H4, H5, H6, H8, H9, H10, H11, H12, H13, H14 |
| 4 | 220uF | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C1, C3, C7, C16 |
| 2 | 220 uF | Capacitor_SMD:CP_Elec_4x5.4 | C8, C9 |
| 2 | 4.7 uF | Capacitor_SMD:C_1206_3216Metric | C4, C5 |
| 2 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C2, C6 |
| 2 | CSD18543Q3A | Buck_Footprint_Library:DNH0008A | U3, U4 |
| 2 | Compute/ENCO_PWR | TestPoint:TestPoint_Pad_1.0x1.0mm | TP3, TP4 |
| 2 | LOGO | LOGO | G***, G*** |
| 2 | VNH5019A-E | Buck_Footprint_Library:SOIC_5019A-E_STM | U1, U2 |
| 1 | +3.3V | TestPoint:TestPoint_Pad_1.0x1.0mm | TP2 |
| 1 | +5V | TestPoint:TestPoint_Pad_1.0x1.0mm | TP1 |
| 1 | 1.2kΩ | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 18V | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | 1MS1T1B1M2QES | Microver2026_Modular_Footprint:SS-12D10G5_XKB | SW1 |
| 1 | 3.3V | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | 330Ω | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 5V | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | 6.8kΩ | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | Boost/Prot | MountingHole:MountingHole_3.2mm_M3 | H2 |
| 1 | Drive_1 | Connector_JST:JST_PH_B6B-PH-K_1x06_P2.00mm_Vertical | J10 |
| 1 | Drive_2 | Connector_JST:JST_PH_B6B-PH-K_1x06_P2.00mm_Vertical | J11 |
| 1 | Drive_3 | Connector_JST:JST_PH_B6B-PH-K_1x06_P2.00mm_Vertical | J12 |
| 1 | Drive_4 | Connector_JST:JST_PH_B6B-PH-K_1x06_P2.00mm_Vertical | J13 |
| 1 | Drive_5 | Connector_JST:JST_PH_B6B-PH-K_1x06_P2.00mm_Vertical | J16 |
| 1 | Drive_6 | Connector_JST:JST_PH_B6B-PH-K_1x06_P2.00mm_Vertical | J17 |
| 1 | Fan control | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | Fuse | microver footprint Library:Fuse PTF-77 | F1 |
| 1 | Left | Connector_PinHeader_2.54mm:PinHeader_2x10_P2.54mm_Vertical | J14 |
| 1 | Lidar pins | Connector_JST:JST_XH_B5B-XH-AM_1x05_P2.50mm_Vertical | J18 |
| 1 | MIC5365-3.3YD5 | Package_TO_SOT_SMD:SOT-23-5 | U5 |
| 1 | PGD_Prot | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Pi 5 TX and RX UART0 (PL011) | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J29 |
| 1 | Pi power pins | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J30 |
| 1 | Prot | MountingHole:MountingHole_3.2mm_M3 | H3 |
| 1 | Right | Connector_PinHeader_2.54mm:PinHeader_2x10_P2.54mm_Vertical | J15 |
| 1 | SW_SPDT | Connector_Wire:SolderWire-0.5sqmm_1x03_P4.8mm_D0.9mm_OD2.3mm | SW2 |
| 1 | Servo 1 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J24 |
| 1 | Servo 2 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J25 |
| 1 | Servo 3 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J26 |
| 1 | Servo 4 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J27 |
| 1 | Spare pins | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J20 |
| 1 | Thermistor_NTC | microver footprint Library:NTC thermistor Microver | TH1 |
| 1 | VIN_5V | Connector_Wire:SolderWire-0.75sqmm_1x02_P7mm_D1.25mm_OD3.5mm | J19 |
| 1 | VIN_Pre | TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J31 |
| 1 | VOUT_Higher | Connector_Wire:SolderWire-0.75sqmm_1x02_P7mm_D1.25mm_OD3.5mm | J28 |
| 1 | VOUT_Pre | Connector_Wire:SolderWire-0.75sqmm_1x02_P7mm_D1.25mm_OD3.5mm | J32 |
| 1 | on/off_Boost | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |

Tim4769/Microver
Swiss Rover Challenge rover project with final electronics, mechanical handoff files, PCB validation firmware, and shared project assets.

Tim4769/Microver
Swiss Rover Challenge rover project with final electronics, mechanical handoff files, PCB validation firmware, and shared project assets.

Tim4769/Microver
Swiss Rover Challenge rover project with final electronics, mechanical handoff files, PCB validation firmware, and shared project assets.

Tim4769/Microver
Swiss Rover Challenge rover project with final electronics, mechanical handoff files, PCB validation firmware, and shared project assets.

Tim4769/Microver
Swiss Rover Challenge rover project with final electronics, mechanical handoff files, PCB validation firmware, and shared project assets.

Tim4769/Microver
Swiss Rover Challenge rover project with final electronics, mechanical handoff files, PCB validation firmware, and shared project assets.

Tim4769/Microver
Swiss Rover Challenge rover project with final electronics, mechanical handoff files, PCB validation firmware, and shared project assets.

Tim4769/Microver
Swiss Rover Challenge rover project with final electronics, mechanical handoff files, PCB validation firmware, and shared project assets.

Tim4769/Microver
Swiss Rover Challenge rover project with final electronics, mechanical handoff files, PCB validation firmware, and shared project assets.

Tim4769/Microver
Swiss Rover Challenge rover project with final electronics, mechanical handoff files, PCB validation firmware, and shared project assets.

Tim4769/Microver
Swiss Rover Challenge rover project with final electronics, mechanical handoff files, PCB validation firmware, and shared project assets.

Tim4769/Microver
Swiss Rover Challenge rover project with final electronics, mechanical handoff files, PCB validation firmware, and shared project assets.


meowmeowahr/KevinbotV3-KiCAD
Kevinbot Core - Parallax Propeller 2 Robot Controller

jonahsaunders/planar-studio
KiCad extension for the copper you can't buy as a part — design planar inductors, transformers, PCB motor stators, filters, and antennas, with electrical modeling and direct write-back to your board.

JRavenelco/WRO_2025_SSbots
We are the SSBots team from Mexico, competitors in the WRO Future Engineers category. This is our first year competing in this category, exploring further into WRO after competing for years in the Robo Mission Category.

CGainsWorks/emb-multirail-smps
Compact multi-output switch-mode power supply in Altium: synchronous buck, boost and LDO stages on a 4-layer board, with loop compensation, thermal analysis and EMC pre-compliance.


ParadigmEngineering/aks-2026-hardware
Autonomous Karting Series (2026) hardware for Paradigm Engineering

Takazudo/zudo-pd
P15 r1 is the common 27 × 40 mm STUSB4500 15 V / 3 A module for LED first, then PD15. The same PCB, population and NVM image serve both. Source: board-p15-draft.kicadpcb and ../../scripts/schgen/boardp15spec.py.
It measures 100 × 135 mm and has 4 copper layers, 1.6 mm thick.
66 parts, built around the CSD18543Q3A, MIC5365-3.3YD5-TR and 1MS1T1B1M2QES. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Tim4769/Microver repository on GitHub, at the commit this page was made from: the board is hardware/final/final_control_board_rev_a/Kicad_Microver2026_Modular_Final/Microver2026_Modular_Final.kicad_pcb and its schematic hardware/archive/boost_manufacturing_rev_a/Boost converter-2026-01-21_080914/Boost converter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Tim4769 before reusing the design.