

Chessboard
Coolest project
- Size
- 199 × 199 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 103
- Nets
- 49
- Pads
- 283
- Tracks, vias
- 955, 122
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 17 Feb 2026
- Updated
- 25 Mar 2026
Overview
Chessboard is an open-source printed circuit board by TibeKnuts001, from the TibeKnuts001/Round-chessboard repository on GitHub. It is a 2-layer board of 199 × 199 mm with 103 parts on 49 nets, routed with 955 tracks and 122 vias.
It is built around the 74HC165D, SN74AHCT1G125DBVR(UMW) and SC2063SO-TR, with the SK5812 among its other parts. Its parts include 41 capacitors, 20 connectors, 16 diodes, 3 ICs and 1 resistor.
Main components
474HC165D
SO-16-40℃~+125℃ 1 28ns@6V,50pF 2V~6V 35MHz 500mW 74HC 8 Parallel or Serial to Serial SOIC-16 Shift Registers ROHSNexperiaShift RegistersSN74AHCT1G125DBVR(UMW)
SOT-23-5-40℃~+125℃ 1 1 10uA 12ns@5V,50pF 2V 3.8V、4.4V 4.5V~5.5V 440mV 74AHCT 800mV 8mA 8mA SOT-23-5 Logic Gates ROHSUMWLogic GatesSC2063SO-TR
SOT-23Hall SwitchesSemimentSK5812
SMD5050-4P-40℃~+85℃ 0.45mA 1.6mm 120° 160mcd~320mcd 2000V 240mcd~450mcd 3.7V~5.5V 4.5kHz 465nm~475nm 515nm~525nm 580mcd~1050mcd 620nm~625nm 800Kbit/s Built-in power-on reset circuit、Built-in one-way transmission function Semi-transparent lens SMD5050-4P RGB LEDs(Built-in IC) ROHSOPSCO OptoelectronicsRGB LEDs(Built-In IC)
Parts
103| Qty | Value | Footprint | References |
|---|---|---|---|
| 35 | 100nF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23 +19 |
| 16 | SC2063SO-TR | Package_TO_SOT_SMD:SOT-23 | H1, H2, H3, H4, U5, U6, U7, U8, U9, U10, U11, U12, U13, U14, U15, U16 |
| 16 | SK5812 | LED_SMD:LED_SK6812_PLCC4_5.0x5.0mm_P3.2mm | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15, D16 |
| 4 | 22uF | Capacitor_SMD:C_1206_3216Metric | C36, C37, C38, C39 |
| 2 | +3.3V | Connector_Wire:SolderWirePad_1x01_SMD_4x8mm | J16, J17 |
| 2 | +5V | Connector_Wire:SolderWirePad_1x01_SMD_4x8mm | J5, J7 |
| 2 | 74HC165 | Package_SO:SOP-16_4.4x10.4mm_P1.27mm | U17, U18 |
| 2 | GND | Connector_Wire:SolderWirePad_1x01_SMD_4x8mm | J6, J8 |
| 2 | Optional capacitor | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C40, C41 |
| 2 | SCLK | Connector_Wire:SolderWirePad_1x01_SMD_4x8mm | J18, J20 |
| 2 | SHLD | Connector_Wire:SolderWirePad_1x01_SMD_4x8mm | J2, J19 |
| 1 | 330 Ohm | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | CONTROLLER | Connector_Wire:SolderWire-0.1sqmm_1x06_P3.6mm_D0.4mm_OD1mm_Relief_1__SCHAAKBOARD | J11 |
| 1 | Connect HALL_DATA_IN to controller (enable on first pcb) | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP5 |
| 1 | Connect HALL_DATA_OUT to controller (dev only) | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP6 |
| 1 | Enable HALL_DATA_IN (enable on chained pcb) | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP3 |
| 1 | Enable LEDS_DIN (enable on chained pcb) | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | Enable SN74AHCT (enable on first pcb) | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP2 |
| 1 | Ground 74HC165 DS PIN (enable on first pcb) | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP4 |
| 1 | HALL_DATA_IN | Connector_Wire:SolderWirePad_1x01_SMD_4x8mm | J4 |
| 1 | HALL_DATA_OUT | Connector_Wire:SolderWirePad_1x01_SMD_4x8mm | J10 |
| 1 | LEDS_DIN | Connector_Wire:SolderWirePad_1x01_SMD_4x8mm | J3 |
| 1 | LEDS_DOUT | Connector_Wire:SolderWirePad_1x01_SMD_4x8mm | J9 |
| 1 | PCB_CNNT1 | Connector_Wire:SolderWirePad_1x01_SMD_4x8mm | J12 |
| 1 | PCB_CNNT2 | Connector_Wire:SolderWirePad_1x01_SMD_4x8mm | J13 |
| 1 | PCB_CNNT3 | Connector_Wire:SolderWirePad_1x01_SMD_4x8mm | J14 |
| 1 | PCB_CNNT4 | Connector_Wire:SolderWirePad_1x01_SMD_4x8mm | J15 |
| 1 | POWER | Connector_Wire:SolderWire-0.5sqmm_1x03_P4.6mm_D0.9mm_OD2.1mm_Relief | J1 |
| 1 | SN74AHCT1G125DBVR | SN74AHCT1G125DBVR:SOT95P280X145-5N | U19 |
Similar boards
- 4 layers16.9 × 119.4 mm

- 4 layers74.5 × 70.3 mm

Nest mini v2-drop in pcb
iMike78/nest-mini-drop-in-pcb
Drop-in PCB replacement for the Google Nest Mini v2 with ESP32-S3, ESP32-P4 and optional ESP32-C6. Inspired by Onju Voice and Home Assistant Voice PE.
229 parts628CERN-OHL-S-2.0 - 8 layers100 × 60 mm

YAMMU ControlBoard v05
Zergie/YAMMU
A Multi Material Unit (MMU) for eight filaments that can also function as a filament dryer and can keep it dry while printing. The design is heavily inspired by voron and their printers.
234 parts107GPL-3.0 - 12 layers152.9 × 90 mm

Data center rdimm ddr4-tester
antmicro/rdimm-ddr4-tester
Experimental platform built around Xilinx Kintex-7 FPGA for development and customization of RAM controllers supporting RDIMM DDR4 RAM modules used in data centers.
691 parts32Apache-2.0 - 2 layers54 × 85.6 mm

Board43
smartbank-inc/Board43
Board43 is an RP2350A-based microcontroller development board. Flash PicoRuby or your favorite firmware and start hacking.
583 parts30 - 2 layers372.1 × 141.2 mm

Mist
modern-hobbyist/aesir
Collection of KiCad PCB designs for custom keyboards, including full-sized and split ergonomic layouts with STM32F072CBT6 microcontrollers.
459 parts27 - 2 layers178 × 711 mm

- 6 layers90 × 90 mm

Codex micro wired revA route nognd
slopus/codex-keybored
A 100% vibe-coded hardware build: Fusion 360, six-layer KiCad PCB, STM32 firmware, and live JLC factory handoff.
97 parts10
Questions
How big is the Chessboard PCB?
It measures 199 × 199 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Chessboard use?
103 parts, built around the 74HC165D, SN74AHCT1G125DBVR(UMW), SC2063SO-TR and SK5812. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Chessboard KiCad files?
From the TibeKnuts001/Round-chessboard repository on GitHub, at the commit this page was made from: the board is hardware/PCB files/chessboard.kicad_pcb and its schematic hardware/PCB files/chessboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Chessboard design in my own project?
Its repository states no licence, so its author keeps all rights: ask TibeKnuts001 before reusing the design.