
StabilizerKiCAD
Coding a stabilizer using Arduino and an accelerometer for my DIY RC plane.
- Size
- 98 × 47 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 8
- Nets
- 50
- Pads
- 92
- Tracks, vias
- 136, 0
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 6 Jan 2026
- Updated
- 22 Feb 2026
Overview
StabilizerKiCAD is an open-source printed circuit board by Thunderthumbs3916, from the Thunderthumbs3916/rc_plane_stabilizer repository on GitHub. It is a 2-layer board of 98 × 47 mm with 8 parts on 50 nets, routed with 136 tracks and 0 vias.
It is built around the MPU-6050. Its parts include 7 connectors and 1 IC. It belongs with the ESP32 boards of this library.
Main components
1README
README.mdrc_plane_stabilizer
Coding a stabilizer using Arduino and an accelerometer for my DIY RC plane.
Parts
8| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | ESP32 | Connector_PinSocket_2.54mm:PinSocket_1x15_P2.54mm_Vertical | J1, J2, J8, J9 |
| 1 | MPU-6050 | Sensor_Motion:InvenSense_QFN-24_4x4mm_P0.5mm | U1 |
| 1 | ~ | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J3 |
| 1 | ~ | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J7 |
| 1 | ~ | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | J4 |
Similar boards
- 2 layers23 × 120 mm

- 4 layers95 × 50 mm

Control board
ZhuYanzhen1/MM32_CLion
本项目是全国大学生智能车竞赛GDUT 2022年极速越野组的项目文件。采用了LQR控制器和多速率卡尔曼融合算法,并在单片机上实现。This project is the project document for the GDUT 2022 Extreme Off-Road Category of the National Student Intelligent Vehicle Competition.
129 parts58AGPL-3.0 - 2 layers50 × 66 mm

- 2 layers36 × 43 mm

Asac fc rev a
victorhook/asac-fc
asac fc is an rp2040 based flight controller made for FPV drone flying
119 parts52GPL-3.0 - 4 layers305 × 208.3 mm

- 2 layers98.5 × 17.8 mm

- 2 layers36.2 × 36.2 mm

- 2 layers26 × 21.3 mm

PModBoard
pms67/PModlet
PMOD PCB with USB-to-UART converter and IMU (MPU-6050, I2C) for FPGAs.
19 parts15MIT
Questions
How big is the StabilizerKiCAD PCB?
It measures 98 × 47 mm and has 2 copper layers, 1.6 mm thick.
What parts does the StabilizerKiCAD use?
8 parts, built around the MPU-6050. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the StabilizerKiCAD KiCad files?
From the Thunderthumbs3916/rc_plane_stabilizer repository on GitHub, at the commit this page was made from: the board is pcb/StabilizerKiCAD/StabilizerKiCAD.kicad_pcb and its schematic pcb/StabilizerKiCAD/StabilizerKiCAD.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the StabilizerKiCAD design in my own project?
Its repository states no licence, so its author keeps all rights: ask Thunderthumbs3916 before reusing the design.