

Doorbell sensor
collection of open home automation projects
- Size
- 41.9 × 38.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 14
- Pads
- 44
- Tracks, vias
- 35, 5
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 29 Dec 2022
- Updated
- 29 Aug 2025
Overview
Doorbell sensor is an open-source printed circuit board by thorio, from the thorio/esphome-projects repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 41.9 × 38.1 mm with 17 parts on 14 nets, routed with 35 tracks and 5 vias.
It is built around the ESP-01S and AMS1117-3.3. Its parts include 5 capacitors, 3 resistors, 3 ICs and 2 connectors. It belongs with the home automation and IoT and sensors and measurement boards and the ESP8266 boards of this library.
Main components
2ESP-01S
WIFIM-TH-20℃~+70℃ -90dBm 16dBm 170mA 2.4GHz 3V~3.6V 56mA 802.11b/g/n、TCP、IP ESP8266 Chip Over-the-air (OTA) update UART 插件 WiFi Modules ROHSAi-ThinkerWiFi ModulesAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdThis is a loose collection of my esphome projects, including pcbs, schematics, CAD drawings and firmware where applicable.
Most don't have BOMs or assembly instructions unfortunately, as it would just eat up too much time.
Open an issue if you have questions.
Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3 |
| 2 | 0.1μF | Capacitor_SMD:C_0805_2012Metric | C1, C5 |
| 2 | 10μF | Capacitor_THT:CP_Radial_D4.0mm_P1.50mm | C3, C4 |
| 2 | ?Ω | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 2K | Potentiometer_THT:Potentiometer_Runtron_RM-065_Vertical | RV1 |
| 1 | 470μF | Capacitor_THT:CP_Radial_D10.0mm_P2.50mm_P5.00mm | C2 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | BUZZER | !Custom:TerminalBlock_KF301-2P-5mm | J2 |
| 1 | ESP-01S | !Custom:ESP-01 | U2 |
| 1 | PC817 | Package_DIP:DIP-4_W7.62mm | U1 |
| 1 | PWR | !Custom:TerminalBlock_KF301-2P-5mm | J1 |
More from thorio/esphome-projects
3- 2 layers69.9 × 69.9 mm

- 2 layers64 × 26.9 mm

- 2 layers74.9 × 58.4 mm

Similar boards
- 2 layers142.6 × 85.1 mm

LineFollower Speedy-
Club-robotica-UDLSB/LineFollower-Speedy-
Documentación del desarrollo del Seguidor de línea (El speedy)
89 partsGPL-3.0 - 2 layers36 × 17 mm

TasmotaLED
Ennar1991/TasmotaLED
Simple 12V LED strip driver based on ESP-01S board running Tasmota
15 parts - 2 layers

DFC77 ESP01
kev-m/DFC77
A personal project to generate a local DCF77-compatible signal for nearby radio-controlled clocks.
19 parts - 2 layers200 × 90 mm

- 2 layers63.1 × 35.3 mm

- 2 layers80 × 80 mm

- 2 layers80 × 40 mm

Diesel heater black pill
peakhunt/chinese-diesel-heater-black-pill
stm32f4 based chinese diesel heater
32 partsMIT - 2 layers290.1 × 130 mm

Questions
How big is the Doorbell sensor PCB?
It measures 41.9 × 38.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Doorbell sensor use?
17 parts, built around the ESP-01S and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Doorbell sensor KiCad files?
From the thorio/esphome-projects repository on GitHub, at the commit this page was made from: the board is doorbell-sensor/pcb/doorbell-sensor.kicad_pcb and its schematic bed-occupancy/pcb/bed-occupancy.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Doorbell sensor design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).