
Summix pcb
thomai-d/eurorack-modules
Eurorack modules I designed (including schematics & gerbers)

Eurorack modules I designed (including schematics & gerbers)
Cv switch is an open-source printed circuit board by thomai-d, from the thomai-d/eurorack-modules repository on GitHub. It is a 2-layer board of 40.3 × 113.4 mm with 30 parts on 27 nets, routed with 206 tracks and 20 vias.
It is built around the TL072. Its parts include 10 resistors, 8 capacitors, 3 connectors, 2 ICs and 1 switch. It belongs with the audio and music boards of this library.
Collection of eurorack modules I designed.
You can find documentation, as well as schematics and gerber files.
All modules are licenced under CC BY-SA 4.0.
Module that outputs two switched control voltages with exponential RC slew limiters.
3-channel summing mixer with 4 inputs and 2 buffered outputs for each channel.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100k | Potentiometer_THT:Potentiometer_Alpha_RD901F-40-00D_Single_Vertical | RV1, RV2, RV3, RV4, RV5, RV6 |
| 4 | 100n | Capacitor_THT:C_Disc_D6.0mm_W2.5mm_P5.00mm | C7, C9, C10, C12 |
| 4 | 20k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R3, R7, R9 |
| 4 | 220R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R4, R5, R12 |
| 2 | 1M | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R6, R11 |
| 2 | 22u | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C1, C3 |
| 2 | 47u | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C5, C6 |
| 2 | AudioJack2_SwitchT | Connector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J1, J2 |
| 2 | TL072 | Package_DIP:DIP-8_W7.62mm_LongPads | U1, U3 |
| 1 | Conn_02x05_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J3 |
| 1 | SW_DPDT_x2 | Reichelt:MS 500F | SW1 |

thomai-d/eurorack-modules
Eurorack modules I designed (including schematics & gerbers)

ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

ctag-fh-kiel/ctag-tbd
CTAG TBD >>to be determined<< an extendible open source Eurorack sound module

plinkysynth/plinky_public
a public release of the plinky sw and hw



matthewcieplak/super-sixteen
Code and schematics for the Super Sixteen Eurorack sequencer

mzuelch/CATs-Eurosynth
Analog Synth Eurorack Modules

StoneRose35/cortexguitarfx
guitar effects processor implemented on various arm cortex platforms
It measures 40.3 × 113.4 mm and has 2 copper layers, 1.6 mm thick.
30 parts, built around the TL072. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the thomai-d/eurorack-modules repository on GitHub, at the commit this page was made from: the board is cv-switch/cv-switch/cv-switch.kicad_pcb and its schematic cv-switch/cv-switch-panel/cv-switch-panel.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask thomai-d before reusing the design.