
Cv switch
thomai-d/eurorack-modules
Eurorack modules I designed (including schematics & gerbers)

Eurorack modules I designed (including schematics & gerbers)
Summix pcb is an open-source printed circuit board by thomai-d, from the thomai-d/eurorack-modules repository on GitHub. It is a 2-layer board of 58.5 × 112 mm with 69 parts on 57 nets, routed with 388 tracks and 13 vias.
Its parts include 27 resistors, 25 connectors, 14 capacitors and 3 ICs. It belongs with the audio and music boards of this library.
Collection of eurorack modules I designed.
You can find documentation, as well as schematics and gerber files.
All modules are licenced under CC BY-SA 4.0.
Module that outputs two switched control voltages with exponential RC slew limiters.
3-channel summing mixer with 4 inputs and 2 buffered outputs for each channel.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 21 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R10, R11, R12, R13, R14, R15, R18, R19, R20, R21, R22, R23, R24, R25 +5 |
| 18 | AudioJack2_SwitchT | MyParts:Thonk_mono | J1, J2, J3, J4, J5, J10, J11, J12, J13, J14, J17, J18, J19, J20, J21, J22 +2 |
| 6 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4, C9, C10, C13, C14 |
| 6 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7, R8, R16, R17, R26, R27 |
| 6 | 22p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C7, C8, C11, C12 |
| 6 | Conn_01x08 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J7, J8, J15, J16, J23, J24 |
| 3 | TL074 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U1, U2, U3 |
| 2 | 22u | Capacitor_SMD:CP_Elec_6.3x5.8 | C5, C6 |
| 1 | Conn_02x05_Odd_Even | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J25 |

thomai-d/eurorack-modules
Eurorack modules I designed (including schematics & gerbers)


jackw01/scanlight
A better light source for scanning color negative film

Biacco42/Ergo42
7x4 ortho linear split keyboard - The Answer to the Ultimate Question of Life, the Universe, and at least Keyboards

eigenco/frankenpi
This is an experimental project to connect Raspberry Pi with the help of cheap Cyclone IV FPGA board to 8-bit ISA bus to act as multiple different devices.

mattybrad/drumkid
Version 4 was the first successful working design, with full code, schematics, Gerbers, etc available on GitHub.

KaiPereira/Overglade-Badges
NFC hackathon badges for the Overglade game jam in Singapore!

BerkeleyHCI/PolymorphicBlocks
A Python-based hardware description language for PCBs for higher-level (block-diagram / system-architecture level) PCB design through libraries of directly reusable subcircuit generators.

It measures 58.5 × 112 mm and has 2 copper layers, 1.6 mm thick.
69 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the thomai-d/eurorack-modules repository on GitHub, at the commit this page was made from: the board is summix/summix-pcb/summix-pcb.kicad_pcb and its schematic cv-switch/cv-switch-panel/cv-switch-panel.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask thomai-d before reusing the design.