

Low Frequency Oscillator based on the Yusynth design
- Size
- 30 × 234.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 95
- Nets
- 63
- Pads
- 244
- Tracks, vias
- 488, 26
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 3 Mar 2024
- Updated
- 24 Nov 2024
Overview
Lfo is an open-source printed circuit board by thismatters, from the thismatters/EurorackLfo repository on GitHub. It is a 2-layer board of 30 × 234.4 mm with 95 parts on 63 nets, routed with 488 tracks and 26 vias.
It is built around the B10K, BAT54S and BC547, with the BC557 and BS170 among its other parts. Its parts include 40 resistors, 12 capacitors, 7 diodes, 7 connectors and 3 ICs.
Main components
5B10K
RES-TH_RK10J12E002LTH-3P SMT ROHSJLCPCB AssemblyUncategorisedBAT54S
SOT-231 Pair Series Connection 1V@100mA 200mA 2uA@25V 30V 600mA SOT-23 Schottky Diodes ROHSMDDSchottky DiodesBC547
TO-92Bipolar (BJT)Jiangsu Changjing Electronics Technology (CJ)BC557
TO-921 PNP 100mA 100nA 150MHz 45V 500mW 6V 800 90mV、250mV PNP TO-92 Bipolar (BJT) ROHSDDFBipolar (BJT)BS170
TO-92-55℃~+150℃ 1 N-channel 1.2Ω@10V 17pF 2.1V 24pF 500mA 60V 7pF 830mW N-Channel TO-92 MOSFETs ROHSonsemiMOSFETs
README
README.mdLow Frequency Oscillator
The Low Frequency Oscillator (LFO), as the name implies, oscillates at a low frequency. This implementation operates over a wide frequency range enabled by a rate knob and switch, offers access to 4 wave shapes simultaneously, and can be synced with an external clock.
The circuit here is based on the Yusynth LFO 2 with minor tweaks to make it more Eurorack friendly. The changes I've made are thus:
- Selected resistors appropriate for +/-12V rails,
- Added polarity protection so that a backward power header doesn't fry anything (twin series schotty diodes: BAT54SL),
- Selected a modern dual NPN diode package for matched transistors,
- Full surface mount design.
The Yusynth page is a treasure trove of information about this circuit that I am too amateur to claim as my own; please read that outstanding page before using this circuit. The page provides many details and other implementations of this circuit that you may find suitable.
The KiCAD project here uses the library/footprints found in my companion repo.
Width
6hp on a standard 3U rack.
Inputs
Potentiometer labeled rate controls oscillation rate along with toggle switch to flip between fast and slow. Single cv input allows modulation of rate, which is augmented by a potentiometer labeled cv. Potentiometer labeled pwm adjusts the duty cycle for the square wave output. Oscillation can be synced to an external input by way of the sync input.
Output
Four outputs, one for each of the following waveshapes: Sine, Saw, Triangle, Rectangle. An LED visualizes the square wave output.
Adjustment
You'll need an oscilloscope.
- Set the
cvknob to minimum. - Set the range switch to
slow. - Set the
rateknob to minimum. - Adjust RV4 until the LED blinks on every 10 seconds (0.1Hz)
- Set the
rateknob to maximum. - Connect the oscilloscope to the SAW output (sharp rising edge, ramp to low).
- Adjust RV6 until the SAW output covers the -5V to 5V range.
- Connect the oscilloscope to the TRIANGLE output.
- Adjust RV7 until the TRIANGLE output covers the -5V to 5V range.
- Connect the oscilloscope to the SINE output.
- Adjust RV7 to perfect the SINE shape.
- Set the range switch to
fast. - Connect the oscilloscope to the TRIANGLE output.
- Adjust RV5 to get a symmetric wave shape.
Vendors
There are part numbers in the BOM for many of the parts (not for basic passives though) at the following vendors:
- Mouser: Needs no introduction. Get your ICs from here (or digikey).
- Tayda Electronics: Good supplier for passive components; audio jacks, and potentiometers. Their audio jacks are slightly smaller than the thonkiconn from thonk.
- Love My Switches: Has really good knobs to go on those potentiometers!
- OSHPark: Fast and (relatively) cheap PCB manufacturer. The V0 circuit works well but has several bugs which are listed below.
Bugs
V0
- CV knob is backwards
- PWM knob is backwards
- Rate knob is backwards
- Kinda hard to dial in
Parts
95| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 100K | Resistor_SMD:R_0805_2012Metric | R4, R6, R7, R9, R11, R14, R15, R19, R20, R21, R31, R32 |
| 6 | 1K | Resistor_SMD:R_0805_2012Metric | R5, R25, R30, R33, R36, R40 |
| 6 | AudioJack2_SwitchT | Eurorack:AudioJack2_Tayda_A-2566 | J2, J3, J4, J5, J6, J7 |
| 4 | 1N4148 | Diode_SMD:D_SOD-323_HandSoldering | D1, D2, D3, D4 |
| 4 | MH | Eurorack:Mech-MountingHole | H1, H2, H3, H4 |
| 3 | 100n | Capacitor_SMD:C_0805_2012Metric | C5, C11, C12 |
| 3 | 10K | Resistor_SMD:R_0805_2012Metric | R3, R18, R34 |
| 3 | 15K | Resistor_SMD:R_0805_2012Metric | R28, R37, R38 |
| 2 | 10 | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 2 | 10K | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV5, RV6 |
| 2 | 10n | Capacitor_SMD:C_0805_2012Metric | C3, C6 |
| 2 | 150K | Resistor_SMD:R_0805_2012Metric | R24, R26 |
| 2 | 200K | Resistor_SMD:R_0805_2012Metric | R17, R23 |
| 2 | 22u/35V | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C1, C2 |
| 2 | 50K | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV4, RV7 |
| 2 | B10K | Eurorack:Potentiometer_RV16AF-41-15R1 | RV1, RV3 |
| 2 | BAT54S | Package_TO_SOT_SMD:SOT-23 | D5, D6 |
| 2 | TL074 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U2, U3 |
| 1 | 1.5K | Resistor_SMD:R_0805_2012Metric | R29 |
| 1 | 10u/35V | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C7 |
| 1 | 120p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C9 |
| 1 | 12K | Resistor_SMD:R_0805_2012Metric | R8 |
| 1 | 1n | Capacitor_SMD:C_0805_2012Metric | C10 |
| 1 | 1u/35V | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C8 |
| 1 | 2.7K | Resistor_SMD:R_0805_2012Metric | R16 |
| 1 | 22K | Resistor_SMD:R_0805_2012Metric | R27 |
| 1 | 27K | Resistor_SMD:R_0805_2012Metric | R12 |
| 1 | 4.7K | Resistor_SMD:R_0805_2012Metric | R35 |
| 1 | 47K | Resistor_SMD:R_0805_2012Metric | R39 |
| 1 | 47n | Capacitor_SMD:C_0805_2012Metric | C4 |
| 1 | 50K | Resistor_SMD:R_0805_2012Metric | R22 |
| 1 | 8.2K | Resistor_SMD:R_0805_2012Metric | R10 |
| 1 | 820 | Resistor_SMD:R_0805_2012Metric | R13 |
| 1 | B50K | Eurorack:Potentiometer_RV16AF-41-15R1 | RV2 |
| 1 | BC547 | Package_TO_SOT_THT:TO-92_Inline_Wide | Q3 |
| 1 | BC557 | Package_TO_SOT_THT:TO-92_Inline_Wide | Q1 |
| 1 | BS170 | Package_TO_SOT_THT:TO-92_Inline_Wide | Q2 |
| 1 | CV-jack_in | Eurorack:Mech-AudioJack-Hole | H10 |
| 1 | Conn_02x05_Odd_Even | Eurorack:PinHeader_2x05_P2.54mm_Vertical | J1 |
| 1 | FM-pot_lvl | Eurorack:Mech-Potentiometer-Hole_level | H6 |
| 1 | ICM7555xB | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | LED | LED_THT:LED_D3.0mm | D7 |
| 1 | LED | Eurorack:Mech-LED-Hole-3mm-Bezel | H8 |
| 1 | PW-pot | Eurorack:Mech-Potentiometer-Hole_pan | H7 |
| 1 | RANGE | Eurorack:Mech-2M_Switch-Hole | H15 |
| 1 | RECT-jack_out | Eurorack:Mech-AudioJack-Hole-Output | H13 |
| 1 | Rate-pot_lvl | Eurorack:Mech-Potentiometer-Hole_level | H5 |
| 1 | SAW-jack_out | Eurorack:Mech-AudioJack-Hole-Output | H14 |
| 1 | SINE-jack_out | Eurorack:Mech-AudioJack-Hole-Output | H11 |
| 1 | SW_DPDT_x2 | Eurorack:Switch_DPDT_Tayda_A-5752 | SW1 |
| 1 | SYNC-jack_in | Eurorack:Mech-AudioJack-Hole | H9 |
| 1 | TRI-jack_out | Eurorack:Mech-AudioJack-Hole-Output | H12 |
Similar boards
- 2 layers30.5 × 99.1 mm

- 2 layers160 × 100 mm

- 2 layers100 × 110 mm

- 2 layers147.3 × 94 mm

Spielmodul
stonedDiscord/Automatenplatinen
Reverse engineerte Hardware aus deutschen Spielautomaten.
234 parts5BSD-2-Clause - 2 layers48.4 × 106.3 mm

- 2 layers65.3 × 100 mm

Mutant SMD
soggybag/Mutant-SMD
A redesign of the Mutant generative synth (MeeBleeps, https://github.com/Meebleeps/MeeBleeps-Mutant-Synth), based on the Eurorack version in /Documents/Arduino/projects/MutantGenerativeArduinoSynth/ (Instructables…
49 parts - 2 layers53 × 52.1 mm

UglyFace 03
soggybag/Ugly-Face-3-SMD
A gated, envelope-controlled square-wave synth fuzz for guitar, in a Hammond 1590B. A TL072 preamp (gain 201) gates and bends a TLC555 oscillator, with a MIX control to blend the dry fuzz with the synth tone.
84 parts - 2 layers71.1 × 128.5 mm

Questions
How big is the Lfo PCB?
It measures 30 × 234.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Lfo use?
95 parts, built around the B10K, BAT54S, BC547 and BC557. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Lfo KiCad files?
From the thismatters/EurorackLfo repository on GitHub, at the commit this page was made from: the board is lfo.kicad_pcb and its schematic lfo.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Lfo design in my own project?
Its repository states no licence, so its author keeps all rights: ask thismatters before reusing the design.