

Eduquencer
- Size
- 71.1 × 128.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 166
- Nets
- 166
- Pads
- 610
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 6 (file 20211014)
- Created
- 8 Oct 2023
- Updated
- 8 Oct 2023
Overview
Eduquencer is an open-source printed circuit board by soundslikefrank, from the soundslikefrank/eduquencer repository on GitHub. It is a 2-layer board of 71.1 × 128.5 mm with 166 parts on 166 nets.
It is built around the ADP150AUJZ-3.3-R7, LM1117-5.0 and COM-12992, with the XZDGK45WT-9, XZM2CRK45WT-9 and B72500D0160H060 among its other parts. Its parts include 60 resistors, 26 capacitors, 23 diodes, 16 switches and 14 connectors. It belongs with the RP2040 boards of this library.
Main components
9ADP150AUJZ-3.3-R7
TSOT-5-40℃~+125℃@(Tj) 1 10uA 150mA 160mV@(150mA) 3.3V 5.5V 70dB@(10kHz) 9uVrms Fixed Positive Under Voltage Lockout、Over Current Protection、Over Temperature Protection、Enable、Thermal Shutdown TSOT-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAnalog DevicesVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsLM1117-5.0
SOT-2231 1.3V@(1000mA) 15V 1A 2mA 5V Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHShongjiachengUncategorisedCOM-12992
-Tactile SwitchesSparkFun ElectronicsXZDGK45WT-9
PLCC-2120° 20mA 3.3V 515nm 525nm Emerald Green Water Clear PLCC-2 LED Indication - Discrete ROHSSunLEDLED Indication - DiscreteXZM2CRK45WT-9
SMD,2.8x5.2mm-40℃~+85℃ 120° 140mW 1cd~1.495cd 2.2V~2.8V 2.4mm Round Lens 625nm 640nm Discrete Diode Red Water Clear SMD,2.8x5.2mm LED Indication - Discrete ROHSSunLEDLED Indication - DiscreteB72500D0160H060
SOD-52316V 290V 5pF@1MHz 65V SOD-523 Varistors ROHSTDKVaristorsB10K
RES-TH_RK10J12E002LTH-3P SMT ROHSJLCPCB AssemblyUncategorisedMMBT3904
SOT-23-55℃~+150℃ 1 NPN 100 100nA 200mA 200mW 300MHz 300mV 40V 6V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)BAT54S
SOT-231 Pair Series Connection 1V@100mA 200mA 2uA@25V 30V 600mA SOT-23 Schottky Diodes ROHSMDDSchottky Diodes
Parts
166| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | COM-12992 | Button_Switch_SMD:SW_Push_1P1T_NO_6x6mm_H9.5mm | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9, SW10, SW11, SW12, SW13, SW14, SW15, SW16 |
| 10 | 100k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R14, R15, R27, R28, R31, R32, R34, R36, R38, R40 |
| 10 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C5, C6, C7, C8, C13, C21, C24, C25 |
| 8 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R45, R46, R47, R48, R49, R50, R51, R60 |
| 8 | 220R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R7, R9, R12, R20, R22, R24, R26 |
| 8 | 560R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R6, R8, R11, R19, R21, R23, R25 |
| 8 | XZDGK45WT-9 | XZMYK45WT-9:XZMYK45WT9 | LED1, LED3, LED5, LED7, LED9, LED11, LED13, LED15 |
| 8 | XZM2CRK45WT-9 | XZMYK45WT-9:XZMYK45WT9 | LED2, LED4, LED6, LED8, LED10, LED12, LED14, LED16 |
| 7 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R10, R17, R30, R35, R37, R41 |
| 6 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C9, C12, C17, C18, C19, C20 |
| 6 | 33k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R16, R29, R33, R42, R55, R58 |
| 6 | 4k7 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3, R13, R18, R54, R57 |
| 4 | B72500D0160H060 | Diode_SMD:D_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D3, D4, D10 |
| 2 | 100 @ 100MHz | Inductor_SMD:L_0805_2012Metric_Pad1.05x1.20mm_HandSolder | FB1, FB2 |
| 2 | 100R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R39, R44 |
| 2 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C10, C11 |
| 2 | 1N5819 | Diode_SMD:D_SOD-123 | D5, D6 |
| 2 | 22u | Capacitor_SMD:CP_Elec_5x5.3 | C14, C15 |
| 2 | B10K | Potentiometer_THT:Potentiometer_Alpha_RD901F-40-00D_Single_Vertical | RV1, RV2 |
| 2 | MCP23018-E_SO | MCP23018-E_SO:SOIC127P1030X265-28N | IC1, IC2 |
| 2 | MMBT3904 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 1 | 100p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3 |
| 1 | 10u | Inductor_SMD:L_0805_2012Metric_Pad1.05x1.20mm_HandSolder | L1 |
| 1 | 180k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R59 |
| 1 | 1k8 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R52 |
| 1 | 220n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C23 |
| 1 | 22p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C26 |
| 1 | 22u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C16 |
| 1 | 3.3k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R43 |
| 1 | 33p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4 |
| 1 | 36k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R56 |
| 1 | 4u7 | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C22 |
| 1 | 6k8 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R53 |
| 1 | ADP150AUJZ-3.3-R7 | ADP150AUJZ-3.3-R7:SOT95P280X100-5N | IC4 |
| 1 | BAT54S | Package_TO_SOT_SMD:SOT-23_Handsoldering | D2 |
| 1 | CV In A | AudioJacks:Jack_3.5mm_QingPu_WQP-PJ301BM_Vertical | J4 |
| 1 | CV In B | AudioJacks:Jack_3.5mm_QingPu_WQP-PJ301BM_Vertical | J5 |
| 1 | Clock In | AudioJacks:Jack_3.5mm_QingPu_WQP-PJ301BM_Vertical | J2 |
| 1 | DAC80501MDGST | DAC80501MDGST:SOP50P490X110-10N | IC5 |
| 1 | Debug | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | Eurorack PWR | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical_SMD | J13 |
| 1 | I2C0 SCL | TestPoint:TestPoint_Pad_2.0x2.0mm | TP1 |
| 1 | I2C0 SDA | TestPoint:TestPoint_Pad_2.0x2.0mm | TP4 |
| 1 | I2C1 SCL | TestPoint:TestPoint_Pad_2.0x2.0mm | TP2 |
| 1 | I2C1 SDA | TestPoint:TestPoint_Pad_2.0x2.0mm | TP5 |
| 1 | LM1117-5.0 | Package_TO_SOT_SMD:SOT-223 | U5 |
| 1 | LM4040DBZ-10 | Package_TO_SOT_SMD:SOT-23_Handsoldering | U6 |
| 1 | LM4040DBZ-5 | Package_TO_SOT_SMD:SOT-23_Handsoldering | U7 |
| 1 | MCP6002-xMS | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | OPA172IDR | OPA172IDR:SOIC127P600X175-8N | IC6 |
| 1 | Out 1 | AudioJacks:Jack_3.5mm_QingPu_WQP-PJ301BM_Vertical | J6 |
| 1 | Out 2 | AudioJacks:Jack_3.5mm_QingPu_WQP-PJ301BM_Vertical | J7 |
| 1 | Out 3 | AudioJacks:Jack_3.5mm_QingPu_WQP-PJ301BM_Vertical | J9 |
| 1 | Out 4 | AudioJacks:Jack_3.5mm_QingPu_WQP-PJ301BM_Vertical | J11 |
| 1 | Out 5 | AudioJacks:Jack_3.5mm_QingPu_WQP-PJ301BM_Vertical | J12 |
| 1 | Out 6 | AudioJacks:Jack_3.5mm_QingPu_WQP-PJ301BM_Vertical | J10 |
| 1 | Out 7 | AudioJacks:Jack_3.5mm_QingPu_WQP-PJ301BM_Vertical | J8 |
| 1 | Out A | AudioJacks:Jack_3.5mm_QingPu_WQP-PJ301BM_Vertical | J14 |
| 1 | Pico | RaspberryPi-Pico:RPi_Pico_SMD_TH | U1 |
| 1 | Reset In | AudioJacks:Jack_3.5mm_QingPu_WQP-PJ301BM_Vertical | J3 |
| 1 | SN74AHCT244NSR | SN74AHCT244NSR:SOIC127P780X200-20N | IC3 |
| 1 | SPI0 CS | TestPoint:TestPoint_Pad_2.0x2.0mm | TP7 |
| 1 | SPI0 SCK | TestPoint:TestPoint_Pad_2.0x2.0mm | TP3 |
| 1 | SPI0 TX | TestPoint:TestPoint_Pad_2.0x2.0mm | TP6 |
| 1 | TL074 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U2 |
| 1 | Val** | Panel:eduquencer-inkscape | Ref** |
Similar boards
- 2 layers100 × 100 mm

- 2 layers39.4 × 109.2 mm

- 2 layers40 × 110 mm

- 2 layers53 × 52.1 mm

UglyFace 03
soggybag/Ugly-Face-3-SMD
A gated, envelope-controlled square-wave synth fuzz for guitar, in a Hammond 1590B. A TL072 preamp (gain 201) gates and bends a TLC555 oscillator, with a MIX control to blend the dry fuzz with the synth tone.
84 parts - 4 layers202.5 × 110 mm

- 2 layers101.3 × 108.3 mm

- 2 layers38 × 100 mm

- 2 layers48.4 × 106.3 mm

Questions
How big is the Eduquencer PCB?
It measures 71.1 × 128.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Eduquencer use?
166 parts, built around the ADP150AUJZ-3.3-R7, LM1117-5.0, COM-12992 and XZDGK45WT-9. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Eduquencer KiCad files?
From the soundslikefrank/eduquencer repository on GitHub, at the commit this page was made from: the board is hardware/eduquencer/eduquencer.kicad_pcb and its schematic hardware/eduquencer/buttons.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Eduquencer design in my own project?
Its repository states no licence, so its author keeps all rights: ask soundslikefrank before reusing the design.