
Le capybara
sporkus/le_capybara_keyboard
Capactive sensing (EC) pcb for Le Chiffre keyboard

a 40-49 key 13 column ortho keyboard with easy kitting
Lucky is an open-source printed circuit board by theycallmeboxy, from the theycallmeboxy/lucky repository on GitHub. It is a 2-layer board of 246.6 × 75.2 mm with 139 parts on 98 nets, routed with 495 tracks and 20 vias.
It is built around the STM32F072CBT6 and PRTR5V0U2X. Its parts include 49 diodes, 10 capacitors, 6 switches, 4 resistors and 3 ICs. It belongs with the STM32 boards of this library.
A 40-49 key 13 column (mostly) ortho keyboard with fun and easy kitting
(Click a link then click download icon in the top right to save a given file to your computer.)
[!CAUTION] I will assume no responsibility for any cost, damage, or sads resulting from trying to make one of my dumb projects. This project has no implicit support, neither moral nor technical.
I'm not a doctor. This is not medical advice. I'm also only a network engineer. You assume all liability in using or reproducing these files.
3DP Case:
CNC Case:
Plate:
PCB:
[!WARNING] Please note there is a defect in PCB version 1 resulting is a missing column wire requiring a bodge; version 1.1 fixes this but has not yet been produced. If by an act of God you have a v1 PCB here are the bodge instructions.
Firmware:
I have made with FDM and CNC aluminum to good effect.
You will need some hardware for either draft 1 case...
For both versions:
10 m2x6mm flat screws such as these
16 20mmx3mm gaskets, either 2mm thick foam like these or 1.5mm thick silicone like these
4 SKUF feet like these like these
For the 3dp version:
| Qty | Value | Footprint | References |
|---|---|---|---|
| 63 | MX_SW_solder | PCM_marbastlib-mx:SW_MX_1u | MX1, MX2, MX10, MX11, MX12, MX13, MX14, MX15, MX16, MX17, MX18, MX19, MX20, MX21, MX22, MX23 +47 |
| 49 | D_Small | Diode_SMD:D_SOD-123 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +33 |
| 7 | 100nF | Capacitor_SMD:C_0402_1005Metric | C1, C3, C4, C5, C6, C7, C8 |
| 4 | 5.1k | Resistor_SMD:R_0402_1005Metric | R1, R2, R3, R4 |
| 2 | 1uF | Capacitor_SMD:C_0402_1005Metric | C9, C10 |
| 2 | MX_stab | PCM_marbastlib-mx:STAB_MX_2.25u | S1, S4 |
| 2 | MX_stab | PCM_marbastlib-mx:STAB_MX_2.75u | S2, S5 |
| 2 | SW_SPST | Button_Switch_SMD:SW_SPST_TL3342 | BOOT1, RST1 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 500mA | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | MX_stab | PCM_marbastlib-mx:STAB_MX_7u | S3 |
| 1 | MX_stab | PCM_marbastlib-mx:STAB_MX_ISO | S6 |
| 1 | PRTR5V0U2X | Package_TO_SOT_SMD:SOT-143 | U2 |
| 1 | STM32F072CBT6 | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | USB_C_Receptacle_USB2.0 | PCM_marbastlib-various:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | XC6206PxxxMR-Regulator_Linear | Package_TO_SOT_SMD:SOT-23 | U3 |

sporkus/le_capybara_keyboard
Capactive sensing (EC) pcb for Le Chiffre keyboard

sporkus/le_chiffre_keyboard_stm32
Le Chiffre keyboard pcb with stm32F072

NCKiser/STM32F072_template
This is a Kicad Template project (that also happens to be a dev-board) for the STM32F072CBT6.



adrientetar/660m
66-key ANSI keyboard PCB, with a STM32F0 MCU and USB-C connection.


hungrygeek/HSKB
Open-source HHKB-layout MX custom keyboard — KiCad PCB, case STL, QMK/VIA firmware. Personal iteration of the HSKB (Happy Sabi Keyboard).
It measures 246.6 × 75.2 mm and has 2 copper layers, 1.2 mm thick.
139 parts, built around the STM32F072CBT6 and PRTR5V0U2X. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the theycallmeboxy/lucky repository on GitHub, at the commit this page was made from: the board is pcb/lucky v1/Lucky.kicad_pcb and its schematic pcb/lucky v1.1/lucky1.1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask theycallmeboxy before reusing the design.