2 layers222.1 × 128.5 mm
2 layers
Breakout Potentiometer
theWickedWebDev/Modular-Synth- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 3
- Nets
- 6
- Pads
- 11
- Tracks, vias
- 6, 0
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 15 Nov 2022
- Updated
- 14 Dec 2022
Overview
Breakout Potentiometer is an open-source printed circuit board by theWickedWebDev, from the theWickedWebDev/Modular-Synth repository on GitHub. It is a 2-layer board with 3 parts on 6 nets, routed with 6 tracks and 0 vias.
It belongs with the interfaces and adapters boards of this library.
README
00_BREAKOUTS/Breakout_DPDT/README.mdDPDT Push Button - Breakout Boards
Parts
3| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1, J2 |
| 1 | R_Potentiometer_US | LIBRARY-8-bit-computer:alpha-9mm-potentiometer | RV1 |
Questions
What parts does the Breakout Potentiometer use?
3 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Breakout Potentiometer KiCad files?
From the theWickedWebDev/Modular-Synth repository on GitHub, at the commit this page was made from: the board is 00_BREAKOUTS/Breakout-Potentiometer/Breakout-Potentiometer.kicad_pcb and its schematic 00_BREAKOUTS/Breakout-AudioJack/AudioJack-Breakout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Breakout Potentiometer design in my own project?
Its repository states no licence, so its author keeps all rights: ask theWickedWebDev before reusing the design.
More from theWickedWebDev/Modular-Synth
12- 2 layers96 × 86 mm
- 2 layers223.8 × 105.7 mm
- 2 layers94 × 73 mm
- 2 layers88 × 70 mm
- 2 layers221 × 101.1 mm
- 2 layers30 × 100 mm
- 2 layers105.8 × 128.5 mm
- 2 layers42.9 × 100.8 mm
- 2 layers42 × 128.5 mm
- 2 layers42 × 128.5 mm
- 2 layers30 × 100.8 mm
Similar boards
- 2 layers40 × 30 mm
- 2 layers51.9 × 16 mm
Passive2-rpi non standard adapter
hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO
3 parts4.4kGPL-2.0 - 2 layers16.3 × 16.3 mm
- 2 layers
Sub
atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
3 parts4kMIT - 2 layers85 × 30 mm
- 2 layers124.5 × 33.7 mm
- 2 layers10.5 × 83 mm
- 2 layers21.2 × 51.3 mm
Pico reset
hackclub/sprig
🍃 Learn to code by making games in a JavaScript web-based game editor.
3 parts1.1kMIT