2 layers222.1 × 128.5 mm
2 layers42 × 128.5 mm
Synth-808
theWickedWebDev/Modular-Synth- Size
- 42 × 128.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 38
- Nets
- 24
- Pads
- 99
- Tracks, vias
- 124, 14
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 15 Nov 2022
- Updated
- 14 Dec 2022
Overview
Synth-808 is an open-source printed circuit board by theWickedWebDev, from the theWickedWebDev/Modular-Synth repository on GitHub. It is a 2-layer board of 42 × 128.5 mm with 38 parts on 24 nets, routed with 124 tracks and 14 vias.
It is built around the TL072 and BAT54J. Its parts include 13 resistors, 5 capacitors, 2 ICs, 2 connectors and 1 diode. It belongs with the audio and music boards of this library.
Main components
2README
00_BREAKOUTS/Breakout_DPDT/README.mdDPDT Push Button - Breakout Boards
Parts
38| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | R_Small_US | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13 |
| 7 | LOGO | LOGO | G***, G***, G***, G***, G***, G***, G*** |
| 4 | C | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3, C5 |
| 2 | AudioJack2_Ground | LIBRARY-8-bit-computer:3.5mm-mono-jack-eurorack-2 | J1, J2 |
| 2 | MountingHole | LIBRARY-8-bit-computer:3.2mm-mounting-hole-eurorack | H1, H2 |
| 2 | R_Potentiometer_US | LIBRARY-8-bit-computer:alpha-9mm-potentiometer | RV1, RV2 |
| 2 | VAL** | LIBRARY-8-bit-computer:mouse-bite-2mm-slot | mouse-bite-2mm-slot, mouse-bite-2mm-slot |
| 1 | BAT54J | Diode_SMD:D_SOD-123 | D1 |
| 1 | C_Polarized | Capacitor_SMD:CP_Elec_5x5.4 | C4 |
| 1 | Eurorack_IDE_16P | LIBRARY-8-bit-computer:IDC-Socket-Eurorack_16p_2.54mm | U2 |
| 1 | R_Potentiometer_US | Potentiometer_SMD:Potentiometer_Bourns_3224G_Horizontal | RV3 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | TL072 | Package_SO:SO-8_3.9x4.9mm_P1.27mm | U1 |
More from theWickedWebDev/Modular-Synth
12- 2 layers96 × 86 mm
- 2 layers223.8 × 105.7 mm
- 2 layers94 × 73 mm
- 2 layers88 × 70 mm
- 2 layers221 × 101.1 mm
- 2 layers30 × 100 mm
- 2 layers105.8 × 128.5 mm
- 2 layers42.9 × 100.8 mm
- 2 layers42 × 128.5 mm
- 2 layers30 × 100.8 mm
- 2 layers54.1 × 114 mm
Similar boards
- 2 layers140 × 140 mm
Guitar overdrive
ginomcfino/guitar-overdrive-pcb
9V analog guitar effects PCB featuring selectable TL072 soft-clipping overdrive and LM301 hard-clipping distortion, tone shaping, input protection, and true bypass switching. Designed in KiCad.
92 parts - 2 layers114 × 61.4 mm
- 4 layers350 × 155 mm
Ventilator
RespiraWorks/Ventilator
Fully-featured ICU ventilator design, optimized for manufacture using commonly available components and free to license.
788 parts169Apache-2.0 - 2 layers70 × 73.1 mm
Neopico hd
fliperama86/neopico-hd
Digital video and audio capture with HDMI output for Neo Geo MVS arcade hardware using Raspberry Pi Pico 2
37 parts90Unlicense - 2 layers47.2 × 55.5 mm
Tinta l2
c0de111/tinta
Battery-powered e-paper sign: room signage, sensor graphs, home automation, or anything over Wi-Fi. Wakes by real-time clock, NFC tap, or button. Raspberry Pi Pico W firmware, custom PCB, and 3D-printed case included.
60 parts39Apache-2.0 - 6 layers158 × 174 mm
TritonECU Main
alpauna/TritonECU
ESP32-S3 engine control unit — fuel injection, ignition timing, wideband O2 (CJ125/LSU 4.9), dashboard, and MQTT telemetry
457 parts10 - 2 layers54.1 × 48.6 mm
E Fidget V3
miameows/E-Fidget
Hi there! There's a lot of moving parts with this project right now, so why don't you check out my latest blog post for more info?
29 parts6MIT - 2 layers68.6 × 53.3 mm
INK-128DA28
TheEccentricGenius/INK4u_Board
An UNO form factor board with a AVR128DA28 processor.
59 parts5CERN-OHL-W-2.0
Questions
How big is the Synth-808 PCB?
It measures 42 × 128.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Synth-808 use?
38 parts, built around the TL072 and BAT54J. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Synth-808 KiCad files?
From the theWickedWebDev/Modular-Synth repository on GitHub, at the commit this page was made from: the board is Percussion-808-Kick/synth-808.kicad_pcb and its schematic 00_BREAKOUTS/Breakout-AudioJack/AudioJack-Breakout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Synth-808 design in my own project?
Its repository states no licence, so its author keeps all rights: ask theWickedWebDev before reusing the design.